wedge Tenders in Andhra Pradesh

1
Panchayat Raj Department - Andhra Pradesh

40994070 moolapalle to neelakantaraopeta via kalpanayunicheruvu of ramapuram mandal of ysr kadapa district; 1 moolapalle to neelakantaraopeta via kalpanayunicheruvu of ramapuram mandal of ysr kadapa district. 2 road portion 3 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201 mord . including contractors profit & over head charges, but excluding gst and seigniorage chargesetc., complete. 4 scarifying existing granular surface to a depth of 50 mm and spreading scarified material in uniform layers with tractor grader and compacting withvibratory roller to achieve thedesired density as per technical specification clause 301.4. mord , including contractors profit & over head charges, but excluding gst etc., complete. 5 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mordincluding contractors profit & over head charges, but excluding gst and seigniorage chargesetc., complete.., complete. 6 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including breaking clods, ramming, spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete. 7 providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing thematerial with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord, including contractors profit & over head charges, but excluding gst and seigniorage etc., complete 8 providing and applying primer coat with cationicbitumen emulsion ( css 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including contractors profit & over head charges, but excluding gst etc., completefor prime coat 9 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including contractors profit & over head charges, but excluding gst etc., completefor tack coat 10 providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates ( table 500.9 ) either using viscous grade bitumen vg30 grade with 8% waste plastic by dry process ( shredded waste plastic ) at the rate of 14.6 kg / 10 sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a hot mix plant of 30 40tph, laying and rolling with a three wheel 0 100 kn static roller capacity, paver finished to required level and grades to be followed by seal coat of either type a or type b or type c including cost and conveyance of all materials from approved sources, , labour charges and hire and operational charges of power road roller and all other machinery, tools and plants, providing barricading for diversion of traffic, erecting red flags other incidental and operational charges etc., complete for finished item of work as per clause 506 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete 11 providing and laying bituminous premixed seal coat ( type c ) comprising of a thin application of fine aggregate premixed with bituminous binder; with crushed stone chips of 6.7 mm size 100% passing through 9.5mm seive and retained on 2.36 mm sieve applied @ 0.09 cum per 10 sqm, chips to be premixed by mechanical means to be laid simultaneously along with the of bitumen vg30 grade with 8% waste plastic by dry process ( shredded waste plastic ) at the rate of 6.50 kgsfor 10 sqm and rolling with power roller including of required line, level, grade to serve as wearing course on previously prepared surface and finishing to rquired level and grades including cost and conveyance of all materials from approved sources and stacking at site to departmental gauge forpremeasurements, seigniorage, labour charges and hire and operational charges of power road roller 8 to 10 tonnes capacity and all other machinery, tools and plants, providing barricading for diversion of traffic, erecting red flags other incidental and operational charges etc., complete for finished item of work as per technical specification clause 508 of mord using hot mix plant including contractors profit & over head charges, but excluding gst and seigniorage etc., complete. ( by mechanical means ) 12 construction ofun reinforced, panneled cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, as per design, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, wedges, steel plates including levelling the formwork etc complete as per drawing ) , spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation, admixtures as approved, curing of concrete slab for 14 days, using curing compound ( where specified ) and water and contraction sawn joint groove ( using daimond studded nblades ) 3 to 5 mm wide and1 / 3rdto 1 / 4th depth of the slab + or 5mm or .thecontraction joint shall be cut as soon as the concrete as under goneinitial hardening and as hard enogh to take up the load of joint swaing machine with out causing damage to the slab. the joint ceilling compound shall not be poured bitumen type having flexibility, resistaance to age hardening and durability of the sealant shall be in accordance with bs 5212 ( part 2 ) with all leads and lifts and coat and conveyance of all materials for 100 thickness for forming the panels of 0.75 x 0.75 mts size as per drawingand technical specification clause 1501including contractors profit & over head charges, but excluding seig charges, labour cess & gst etc, . complete. 13 construction of shoulders by providing selected earth having minimum cbr of 10%, mdd not less than 1.85 g / cc with ll & pi not more than 40% and 20 respectivelyand spreading in uniform layers with tractor grader on prepared surface, and compacted at omc withvibratory roller 80 100 kn to meet requirement of table 300.2 with as per technical specification clause 303 & 407 mord, by using machinery including contractors profit & over head charges, but excluding gst and seigniorage etc., complete. 14 const. of 1v 1000mm dia pipe culverts 15 earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth, including contractors profit & over head charges, but excluding gst etc., complete for foundations 16 fillingin foundation trenches / pipe bedding with sand as per drawing and technical specification clause 305.3.9 mord & 304 morth , including contractors profit & over head charges, but excluding gst and seigniorage etc., complete. 17 providing concrete for plain concrete m 10grade in open foundations using 40 mm nominal size graded hard stone aggregate ( hbg ) , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including contractors profit & over head charges, but excluding gst and seigniorage etc., complete for levelling course 18 plain cement concrete m 15 grade using 40, 20 & 10mm metal ( hbg ) mechanically mixed in foundation complete as per drawings and technical specification clauses 802, 804, 805, 806, 807, 1202 and 1203 mord and 1500, 1700 & 2200 morth , including contractors profit & over head charges, but excluding gst and seigniorage etc., complete for head walls of pipe culverts & footings of slab culverts 19 providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets. tech specification clause 1101.6 mord , including contractors profit & over head charges, but excluding gst and seigniorage etc., complete 1000mm dia rcc np3 pipes for pipe culverts 20 painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and technical specification clause 1701mord. including contractors profit & over head charges, but excluding gst etc., complete 21 construction of single row cable duct 300 mm dia pipes ( t.w 10.0 m ) 22 earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth, including contractors profit & over head charges, but excluding gst etc., complete for foundations 23 providing and laying reinforced cement concrete pipe np3 for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets. tech specification clause 1106 mord, including contractors profit & overhead charges but eexcluding gst & seigniorage charges. etc., complete. for pipe culverts 24 construction of protection walls 25 earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth, including contractors profit & over head charges, but excluding gst etc., complete for foundations 26 providing concrete for plain concrete m 10grade in open foundations using 40 mm nominal size graded hard stone aggregate ( hbg ) , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including contractors profit & over head charges, but excluding gst and seigniorage etc., complete for levelling course 27 plain cement concrete m 15 grade using 40, 20 & 10mm metal ( hbg ) mechanically mixed in foundation complete as per drawings and technical specification clauses 802, 804, 805, 806, 807, 1202 and 1203 mord and 1500, 1700 & 2200 morth , including contractors profit & over head charges, but excluding gst and seigniorage etc., complete for head walls of pipe culverts & footings of slab culverts 28 providing weep holes in brick masonry / stone masonry, plain / reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1 ( v ) :20 ( h ) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7 mord / 2706 & 2200 morth, including contractors profit & overhead charges but eexcluding gst & seigniorage charges. etc., complete. 29 painting two coats including prime coat with epoxy paint of approved brand on concrete / steel surfaces after through cleaning of surface to give an even shade as per drawing and technical specification clause 1701 mordeexcluding gst etc., complete. 30 road furniture 31 providing and fixing of 5 thkilometre stones of size 350x250x1675 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 32 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 33 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. hectometre stones 34 providing and fixing village name board size 900x450 mm made out of type — iv of astmd 4956 09 high intensity prismatic prismatic retro reflective sheeting and confirming to irc 67:2012 for full background of green colour & white letters and fixed over 3mm alluminium composite material sheet having minimum 0.30 mm thick aluminium skin on both sides with back side painted grey colour and fixed over back support frame of m.s angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a ms angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level to the bottom of the board. the signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of 30cm of height. the signpost shall be firmly fixed with ms base angle 35x35x4 mm in to the ground by m 15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials , equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by engineer in charge for the following roads. 35 providing and fixing mandatory / regulatory sign boards size 600 mm equilateral triangle made out of type — iv of astmd d4956¬09 high intensity prismatic retro reflective sheeting and confirming to irc 67:2012 for full background of white colour and letters / logos done by screen printing in black colour, boarders by screen printing in red colour and fixed over 3mm alluminium composite material ( acm ) sheet having minimum 0.30 mm thick aluminium skin on both sides with back side painted grey colour and fixed over back support frame of m.s angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a ms angle post of size 75x75x6mm with clear height of not less than 2.1 m from the ground level the bottom of the board. the signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of 30cm of height. the signpost shall be firmly fixed with ms base angle 35x35x4 mm in to the ground by m15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials , equipment, machinery and labour with all leads and lift, loading changes necessary for satisfactory completion of the work as directed by engineer in charge for the following roads. 36 providing and fixing of maintenance information board as per irc:67 made oftype retro reflective sheeting vide clause 1701.2.3 mord / 801.3 morthfixed over alluminium composite material of 4mm thicknessand size of 900 x 1500 mmon a frame made up of 25x25x6mm thick ms angles and 25x 5mm ms flatsand welded to welded ms flat iron plates 50 x 5 mm size on back and welded to 75 mm x 75mm x6mm ms hallow squar tube frame of height 3.00m as per the drawing and painted with ready mixed syntheticenamel paint of superiorquality in required shade and colour, lettering , colour, band, diagrams, specifications etc., complete as per mord specifications.the 75mm dia steel tubes welded with 50 x 50x 6 mm angle iron hold fasts of 225 mm long at bottom and painted with primer and two coats of epoxypaint and embedded in to cement concrete m15 grade of size 600 x 600 x 750 mm, 600 mm below ground level as per mord specifications clause 1701 including over head charges & contractors profit but excluding gst & seigniorage charges etc., complete. 37 providing and fixing of typical pmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges.the lower plate will be we welded with ms angle irone frame of 25 mm x 25 mm x 5 mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75 mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m 15 grade blocks of 450 mm x 450 mm x 600 mm, 600 mm below ground level. the top most diamond plate will be welded to middle plate by 47 mm x 47mm of 12 swg sheet tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc., will be pointed with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 mord , including overhead charges & contractors profit gst & seignarage charges. 38 s&f of citizen information board of size 750mm x 900mm rectangular type 2nowith 16 gauge crs sheet no s and 53mm gi pipe, 3.05m 2 nos. in vertical and 53mm gipipe, 1.15mts 2nos in horiozantals and 40x40x5mm ms as supports for crs sheet . horizontally at top and bottom fixes at the back side of the board. the ms flatsof size 20x5mm of 0.90m 3 nos. fixed at the back side of the board. and hold fasts and 10x10mm size ms square rods of 0.3m 6nos. fixed at the bottom of 53mm gi pipes as hold fasts including cost of materials including painting, lettering and fixing by concrete etc., complete for finished item of work. 39 providing & fixing of typical pmgsywith logoboard @ every 2km as per mord secifications and drawing. ms middle plateof 1.6mm thick, duly welded with ms flat iron 25mmx5mm size on black on edges.the top most diamond plate will be welded to middle plate by 47mmx47mm of 12 swg sheet plate tube will be welded to 1 nos 75mmx75mm of 12 swg sheet tubes posts duly embedded in cc m15 grade blocks of 450mmx450mmx600mm, 600mm below ground level. .all ms will be stove enmeled on both sides.lettering and paining figures of superior quality in required shade and colour.all sections of framed posts and sheet tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1. 40 pavement markings with hot line applied thermo plastic compound 2.50 mm thick including reflecting glass beads at 250 gms / sqm, thickness of 2.5mm is exclusive of surface applied glass beads for providing centerline marking 300 cms length and 10cm width with a gap of 450 cms including cost and convenyace of all materialsequipment machinary and labour with all leads and lifts loading and unloading charges necessary for sucessful completion of work as directed by the engineer in charge and confirming to is 164 1981 ( 1st revison reaffirmed in 1986 ) and clause 803 of most specification for roads and bridge works and also confirming to irc 35 1997 including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 41 supplying & fixing of moulded shanks raised pavement markers made of polycarbonate and abs moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to astm d 4280 type h and complying to specifications of category a of morth circular no. rw / nh / 33023 / 10 97 – do iii dt 11.06.1997. the height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 sqcm on each side and the slope to the base shall be 35 + / 5 degree. the strength of detachment of the integrated cylindrical shanks, ( of diameter not less than 19 + / 2 mm and height not less than 30+ / 2 mm ) from the body is to be a minimum value of 700 kgf. fixing will be by drilling holes on the road for the twin shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer in charge including cost and conveyance of all materials, all labour charges, 42 providing and erecting a w metal beam crash barrier comprising of 3mm thick corrugated sheet metal rail, 70cm above road / ground level, fixed on ismc series channel vertical post, 150 x 75 x 5mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to is:1367 and is:1364, metal beam rail to be fix vertical post with a spacer of channel section 150 x 75 x 5mm, 330mm long complete as per clause 810 including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 43 providing and fixing rigid delineator double side ( type xi ) for curves and tank bunds 44 supply and installation of hazard markers using m.s. angle of size 55x55x6mm and 120 cm high above ground level painted with two coats of black & white stripes of 15cm wide with first quality synthetic enamel paint over one coat of appropriate primer of approved brand, colour, with 30cm x 90cm retro reflective sheeting type iii / iv of yellow colour fixed at top over 1.5mm aluminium sheet with standard supports consisting of alternately black and yellow stripes, with black stripes in screen printing sloping downward at an angle of 45degree towards the side of the obstruction on which the traffic is pass and buried in to the ground in a trench of size 30cm x 30cm, and 50cm depth filled with cc 1:2:4 including cost and conveyance of all materials, equipment, machinery and labour with all lead and lifts, loading and unloading charges necessary for successful completion of works as directed by the engineer in charge and conforming to irc 79 1981 & morth specification no. 805 and approved drawings etc., complete for finished item of work including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. at culverts 45 supply and installation of hazard markers using m.s. angle of size 55x55x6mm and 120 cm high above ground level painted with two coats of black & white stripes of 15cm wide with first quality synthetic enamel paint over one coat of appropriate primer of approved brand, colour, with 30cm x 90cm retro reflective sheeting type iii / iv of yellow colour fixed at top over 1.5mm aluminium sheet with standard supports consisting of alternately black and yellow stripes, with black stripes in screen printing sloping downward at an angle of 45degree towards the side of the obstruction on which the traffic is pass and buried in to the ground in a trench of size 30cm x 30cm, and 50cm depth filled with cc 1:2:4 including cost and conveyance of all materials, equipment, machinery and labour with all lead and lifts, loading and unloading charges necessary for successful completion of works as directed by the engineer in charge and conforming to irc 79 1981 & morth specification no. 805 and approved drawings etc., complete for finished item of work including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. at sharp curves...

Due Date : December 28, 2023

Tender Value : ₹ 1.28 Crore

View Tender
2
South Central Railway - Andhra Pradesh

40991987 supply of supply of solid wooden wedge as per lalaguda drg. no. c&w sketch no. 0784, material: neem wood, teak wood, sal wood, bullet wood, black chulgam, irul, axle wood with csi>/= 88. note: sample to be approved by consignee before bulk supply.supply of solid wooden wedge as per lalaguda drg. no. c&w sketch no. 0784, material: neem wood, teak wood, sal wood, bullet wood, black chulgam, irul, axle wood with csi>/= 88. note: sample to be approved by consignee before bulk supply.,supply of solid wooden wedge as per lalaguda drg. no. c&w sketch no. 0784, material: neem wood, teak wood, sal wood, bullet wood, black chulgam, irul, axle wood with csi>/= 88. note: sample to be approved by consignee before bulk supply. [ warranty period: 30 months after the date of delivery ] => limited...

Due Date : December 18, 2023

Tender Value : ₹ Ref. Documents

View Tender
3
South Central Railway - Andhra Pradesh

40937690 supply of ultrasonic flaw detectors with accessories and spares for axle testing according to rdso specification m&c/ndt/125/2004.rev.ii january 2017 of make m/s. modsonic instruments mfg. co.(p) ltd with bnc bnc cables 20 nos., normal probes 50 nos., zero degree wedges 12nos., 17.5 degree wedges 20nos. according to the specification enclosed.ultrasonic flaw detectors with accessories and spares for axle testing according to rdso specification m&c/ndt/125/2004.rev.ii january 2017 of make m/s. modsonic instruments mfg. co.(p) ltd with bnc bnc cables 20 nos., normal probes 50 nos., zero degree wedges 12nos., 17.5 degree wedges 20nos. according to the specification enclosed.,ultrasonic flaw detectors with accessories and spares for axle testing according to rdso specification m&c/ndt/125/2004.rev.ii january 2017 of make m/s. modsonic instruments mfg. co.(p) ltd with bnc bnc cables 20 nos., normal probes 50 nos., zero degree wedges 12nos., 17.5 degree wedges 20nos. according to the specification enclosed. [ warranty period: 24 months after the date of delivery ]...

Due Date : December 26, 2023

Tender Value : ₹ Ref. Documents

View Tender
4
South Central Railway - Andhra Pradesh

40904510 auction sale of m s heavy melting actual lot no. 03122312 0517. pl no.98050047 ( 15 ) ( hsn code 72044900 gst18% on fcm basis ) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, m s counter weights, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 ( image attached ) ( note: 1. if any ss / corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery ) ...

Due Date : December 09, 2023

Tender Value : ₹ Ref. Documents

View Tender
5
South Central Railway - Andhra Pradesh

40904509 auction sale of casnub bogies of side frames bolsters : actual lot no. 03122312 1037. pl no. 98117117 (15) (hsn code 72044900 gst 18% on fcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 4 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : December 09, 2023

Tender Value : ₹ Ref. Documents

View Tender
6
Southern Power Distribution Company Of Andhra Pradesh Limited - Andhra Pradesh

40873909 tender for supply, installation and commissioning of 4 nos 33/11 kv outdoor sub stations in tirupati circle and 4 nos. 33/11 kv outdoor sub stations in anantapur circle, b) supply, fixing and testing of fired wedge connectors for existing 40 nos 33/11kv substations in the anantapur, c) supply and installation of 37 nos. video conference equipments in apspdcl including web licenses with five years waranty & support and 7 nos. of laptops for operating video conference/network trouble shooting in apspdcl....

Due Date : December 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
8
South Central Railway - Andhra Pradesh

40750499 auction sale of heavy melting;actual lot no. 03122311 0621. pl no.98050047 (15) (hsn code 72044900 gst18% on fcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : November 29, 2023

Tender Value : ₹ Ref. Documents

View Tender
9
South Central Railway - Andhra Pradesh

40673616 auction sale of m s heavy melting actual lot no. 03122311 0520. pl no.98050047 (15) (hsn code 72044900 gst18% on fcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : November 23, 2023

Tender Value : ₹ Ref. Documents

View Tender
10
South Central Railway - Andhra Pradesh

40673327 supply of wooden wedges for locomotive as per els/lgd drg no.c/els/lgd/genl/3/19.wooden wedges for locomotive as per els/lgd drg no.c/els/lgd/genl/3/19.,wooden wedges for locomotive as per els/lgd drg no.c/els/lgd/genl/3/19. [ warranty period: 30 months after the date of delivery ]...

Due Date : December 04, 2023

Tender Value : ₹ Ref. Documents

View Tender
11
South Central Railway - Andhra Pradesh

40507023 auction sale of actual lot no. 03122311 1020. pl no. 98117117 (15) (hsn code 72044900 gst 18% on fcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 4 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : November 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
12
South Central Railway - Andhra Pradesh

40507018 auction sale of m s heavy melting actual lot no. 03122311 0523. pl no.98050047 (15) (hsn code 72044900 gst18% on fcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : November 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
13
Uranium Corporation Of India Limited - Andhra Pradesh

40485707 ci gate valves , supply of iron gate valves , technical details: cast iron gate valve, outside screw, rising stem.flange dimensions as per ansi b 16.5 class 150, flate face rating of valve pn 1.0 body cast iron ( is:210 fg 200 ) wedge cast iron ( is:210 fg 200 ) stem 13 % cr. ss, type 410body seat ring 13% cr.ss type 410 wedge seat ring 13% cr. ss, type 410 , valve size 50nb , valve size 100nb , valve size 150nb , valve size 200nb...

Due Date : November 30, 2023

Tender Value : ₹ Ref. Documents

View Tender
14
South Central Railway - Andhra Pradesh

40482876 auction sale of ms scrap 50.000mt delivery on actual weighment basis.lot no 5312231066gtlgymsap available with sse c and w gy. scrap, condemned, u/s released ms scrap consisting of 41 items as follows : 1. snubber wedges, 2. articulated lock lift lever assembly, 3. hand brake wheel (side operated), 4. operating lever (coupler rod), 5. broken sab?s, 6. broken draft gears, 7. cross bars, 8. broken break beams support, 9. front followers, 10. yoke pins, 11. broken/ bent gear pins12. broken/bent m.s angular, 13. knuckle pins, 14. foot step for hand brake wheels, 15. bolt and nuts, 16. pu pad top & bottom iron cups, 17. bcn door cotters long & short, 18. side bearer housing, 19. stricker casting wear plate20. door way stiffner, 21. load empty gear box, 22. end pull rod & push rod, 23. control rod, 24. wear plate for break beam (pocket liner), 25. cut off angle cock, 26. door hinge & pins, 27. main pull rod long & short, 28. lock for cbc, 29. bolster side frame friction liner, 30. liner for bolster, 31. empty tie rod, 32. brake shoe keys, 33. broken brake cylinders, 34. broken auxilary reservoirs, 35. load empty bracket long, 36. load empty bracket small, 37. shaft bearing with sign plate, 38. bearing pieces, 39. shank wear plate, 40. locking plates 41.other c& w broken parts, total quantity: 50.000mt approx. available in gooty boxn roh depot, behind atc. ds 8 no 0531202313281 dt: 05.10.23. hsn code: 720429/18%)note to the bidders 1) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2) post auction no representation shall be entertained.3) for photos of this lot, kindly click on view lot image on bottom left side.4) gas/chisel cutting is permitted ,if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc.5) in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6) it is the responsibility of the purchaser/bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7) clubbing of the lots, what so ever, is not permitted for loading. 8 a) in case the proprietor/owner of the firm, wishes to effect the delivery of the lot personally, he/she should collect the original do copy and delivery point letter, duly appending his/her specimen signature in this office, by submitting either aadhaar (or) pan card , so as to have genuineness in all aspects ,from both ends.b) in case the proprietor/owner of the firm, wishes to nominate a representative on his/her behalf ,to effect the delivery of the lot, the representative should collect the original do copy and delivery point letter, duly appending his/her specimen signature in this office, by submitting original power of attorney filled in all aspects ,along with either aadhaar (or) pan card of the representative , so as to have genuineness in all aspects ,from both ends. 9) railways does not guarantee for quality ,quantity description etc....

Due Date : November 10, 2023

Tender Value : ₹ Ref. Documents

View Tender
15
Dredging Corporation Of India Limited - Andhra Pradesh

40480743 tender for procurement & supply of ship spares to dci dredgers, delivery at csc, visakhapatnam at free of cost 1 seal 47x19xd1150 mm seal bow seal (bow coupling seal) drw no. 4149 1000 100 2 turning gland short d=800 l=615mm, ihc part no. 100408830, art no. 59102550, drw no. 5474441 pl 5826002 3 half retaining ring id=990 od=1540 th=100mm, ihc part no. 100409990, art no. 59001132 4 wear ring 2/2 d=800mm, ihc part no. 100409513, art no. 59001152_e, drw no. 5479244 5 wedge with rod m24 ,drw no. 5479244 6 wear bush sliding piece d=800, ihc part no. 100410064, art no. t50093777, 7 wearing bush (hull) d=800, drw no. 5479244, 8 jet water retaining ring od=545 id=415 th=12mm, part no. 100414805 9 jet water seal with bushes dn300,part no. 110296835...

Due Date : November 10, 2023

Tender Value : ₹ Ref. Documents

View Tender
16
South Central Railway - Andhra Pradesh

40452153 auction sale of casnub bogies: actual lot no. 03122311 0612. pl no. 98117117 (15) (hsn code 72044900 gst 18% on fcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 1 to 4 cross road (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : November 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
17
South Central Railway - Andhra Pradesh

40321835 auction sale of casnub bogies of side frames bolsters; actual lot no.03122310 0612. pl no. 98117117 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable released ks brake beams casnub bogies of side frames bolsters with or without attachments of spring planush rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 1 to 4 cross road (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : October 28, 2023

Tender Value : ₹ Ref. Documents

View Tender
18
South Central Railway - Andhra Pradesh

40321834 auction sale of heavy melting; actual lot no. 03122310 0630. pl no.98050047 (15) (hsn code 72044900 gst18% on rcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, tension device rods, v belt anti slippage clamp ,side lamp fitting, suspension pin, om plant empty and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : October 28, 2023

Tender Value : ₹ Ref. Documents

View Tender
19
South Central Railway - Andhra Pradesh

40065343 auction sale of housings : actual lot no. 03122310 0124. pl no. 98050060 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable cs scrap of housings with or without spacers, wedges, of sorts and sizes full or cut with or without attachments. location road no.1 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : October 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
20
South Central Railway - Andhra Pradesh

40065342 auction sale of casnub bogies : actual lot no. 03122310 0210b . pl no. 98117117 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 1 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : October 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
21
East Coast Railway - Andhra Pradesh

40058248 supply of hydraulic wedge jack 3 ton capacityhydraulic wedge jack 3 ton capacity,hydraulic wedge jack 3 ton capacity along with hydraulic foot pump assembly & 10 metres hose swivel, (1) working pressure (bar) : 700 750 (2) insertion height (mm) : = 15 for wedge (3) minimum lift height : 50mm for wedge (4) maximum lift height, mm : 470 millimeter (5) test report for conformity of parameters from any ilac / nabl accredited / central gov. lab [ warranty period: 12 months after the date of delivery ]...

Due Date : October 25, 2023

Tender Value : ₹ Ref. Documents

View Tender
22
South Central Railway - Andhra Pradesh

39997385 auction sale of casnub bogies :actual lot no. 03122310 0410 pl no. 98117117 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 1 to 4 cross road (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : October 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
23
South Central Railway - Andhra Pradesh

39997379 auction sale of casnub bogies :actual lot no. 03122310 210a pl no. 98117117 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 1 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : October 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
24
South Central Railway - Andhra Pradesh

39997376 auction sale of m s heavy melting actual lot no. 03122310 0525. pl no.98050047 (15) (hsn code 72044900 gst18% on rcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : October 11, 2023

Tender Value : ₹ Ref. Documents

View Tender
25
South Central Railway - Andhra Pradesh

39934436 supply of supply of solid wooden wedge as per lalaguda drg. no. c&w sketch no. 0784, material: neem wood, teak wood, sal wood, bullet wood, black chulgam, irul, axle wood with csi>/= 88. note: sample to be approved by consignee before bulk supply.supply of solid wooden wedge as per lalaguda drg. no. c&w sketch no. 0784, material: neem wood, teak wood, sal wood, bullet wood, black chulgam, irul, axle wood with csi>/= 88. note: sample to be approved by consignee before bulk supply.,supply of solid wooden wedge as per lalaguda drg. no. c&w sketch no. 0784, material: neem wood, teak wood, sal wood, bullet wood, black chulgam, irul, axle wood with csi>/= 88. note: sample to be approved by consignee before bulk supply. [ warranty period: 30 months after the date of delivery ]...

Due Date : October 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
26
Tirumala Tirupati Devasthanams - Andhra Pradesh

39916633 operation and maintenance including water treatment of sri pat pushkarini at tiruchanoor for two years 2023 24 and 2024 25 , supply and delivery of pn 1.6 ( mpa ) 100 mm dia resilient seated soft sealing gate valves sluice valves with body and bonnet of ductile iron ggg 40 sg 400 15 or ggg 50 sg 500 7 or equivalent as per is1865, is:3896 2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3 o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100 percent leak proof with face to face dimensions as bs:5163 type a / is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside ( min 250 microns ) ral 5005 with pocket less straight through body passage conforming to design standards of din 3202f4 / bs:5163 type a flange drilling as per is 1538 excluding all taxes, duties and transportation. without by pass, engaging of labour for cleaning of pushkarini base for removal of algae, vegetation and un wanted materials to keep the base clean for occasions and regular maintenance of pushkarini un skilled workers, manufacture, supply and delivery of 200 mm . dia ci wafer lug type butterfly valves conforming to is 13095 / 1991 ( reaffirmed 1998 ) excluding transportation, ced and taxes etc., complete. operation done with worm actuator isi marked rate at ex factory, painting with ready mixed synthetic enamel paint in all shades grade ii approved colour and make over a priming coat with ready mixed red oxide metal primer paint ( total three coats ) including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete, providing , laying, testing and commissioning of following classes ms pipes conforming to is 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. makes: jindal / hissar / tata pipes / prakash surya .......100 mm dia b class, providing , laying, testing and commissioning of following classes ms pipes conforming to is 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. makes: jindal / hissar / tata pipes / prakash surya ......150 mm dia b class, providing , laying, testing and commissioning of following classes ms pipes conforming to is 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. makes: jindal / hissar / tata pipes / prakash surya .....200 mm dia b class, rewinding of the 30.0 hp electric motors with suitable gauge insulated pvc copper wire varnishing , tapping, fitting complete with over hauling and replacement of terminal plate / minor hard ware items viz, soldering, testing of out going wires, bolts and nuts, painting with approved color etc., and keep the motors in good condition including all taxes., supply of spare parts of air compressor at pat temple balancing nut, supply of spare parts of air compressor at pat temple piston guide panel filter, supply of spare parts of air compressor at pat temple enc 10 150 grade oil, supply of spare parts of air compressor at pat temple oil scraper ring, supply of spare parts of air compressor at pat temple rlx suction valve assembly, supply of spare parts of air compressor at pat temple delivery valve assembly cr11, supply of spare parts of air compressor at pat temple suction valve assembly cr11, supply of spare parts of air compressor at pat temple spring plate 0.90 mm, supply of spare parts of air compressor at pat temple spring plate 0.60 mm, supply of spare parts of air compressor at pat temple valve plate 105 mm dia, supply of spare parts of air compressor at pat temple piston 35 mm dia, supply of spare parts of air compressor at pat temple delivery valve cover o rings, annual maintenance of air compressor of pushkarini of sri padmavathi ammavari temple tiruchanoor 35 mm dia unloading piston o rings, supply of spare parts of air compressor at pat temple gland packing rings, supply of spare parts of air compressor at pat temple 210 mm dia sealing rings, supply of spare parts of air compressor at pat temple 210 mm dia bearing rings, supply of spare parts of air compressor at pat temple 250 mm dia sealing rings, supply of spare parts of air compressor at pat temple gudgen pin, supply of spare parts of air compressor at pat temple big end bearing, supply of spare parts of air compressor at pat temple suction air filter elements, supply of spare parts of air compressor at pat temple main bearing bushes, annual maintenance of air compressor of pushkarini of sri padmavathi ammavari temple tiruchanoor monthly visits for tiruchanoor pat temple, supply of the laboratory chemicals chloroscops, supply of the laboratory chemicals universal indicator 100 ml, supply of the laboratory chemicals o tolidine 500 ml, supply of the laboratary chemicals koo2 h2s bottle, providing chemical treatment to sri pat pushkarini water with synthesis make hydrochloric acid for neutralising the water to maintain ph between 7 .2 to 7 .6 hcl, providing chemical treatment to sripat pushkarini water with aluminium sulphate for better coagulation and settlement al2so4, providing chemical treatment to sripat pushkarini water with poly electrolyte to settle the suspended particles p e, providing chemical treatment to sripat pushkarini water sodium hypochlorite 12.50 o / o or 0.125 grms / ltr chlorine content ( nacl ) , maintenance and operation with semi skilled and unskilled workers for sri pat pushkarini water treatment engaging of semiskilled unskilled workmen for attending with uniform pump drivers helpers and man mazdoors for operation and maintenance of the pressure filters and including pumping the water to pressure filter with the existing pumps any other pumps erected for required quantities and cleaning back washing and operation of pressure filters mixing of chemicals in to sri pat pushkarini daily etc as directed during execution for sri pat puskarini at tiruchanoor. the workmen shall be available at site for attending duty in 2 shifts and necessary weekly off arrangements are to be made by the contractor. the man power are four 4 semiskilled and four 4 unskilled including weekly off provision....

Due Date : October 16, 2023

Tender Value : ₹ Ref. Documents

View Tender
27
Uranium Corporation Of India Limited - Andhra Pradesh

39907180 ci gate valves , supply of iron gate valvestechnical details: cast iron gate valve,outside screw, rising stem. flange dimensions as per ansi b 16.5 class 150, flate face rating of valve pn 1.0body cast iron (is:210 fg 200) wedge cast iron (is:210 fg 200) stem 13 % cr. ss, type 410body seat ring 13% cr.ss type 410 wedge seat ring 13% cr. ss, type 410. , valve size 50nb , valve size 100nb , valve size 150nb , valve size 200nb...

Due Date : October 06, 2023

Tender Value : ₹ Ref. Documents

View Tender
28
South Central Railway - Andhra Pradesh

39846137 supply of centre wedge for mk 50 draft gear ( item to be supplied with work test certificate ) as per m / s besco drg.no.besco fig. 20; item no.2. [ warranty period: 30 months after the date of delivery ] ...

Due Date : October 18, 2023

Tender Value : ₹ Ref. Documents

View Tender
29
Andhra Pradesh Medical Services And Infrastructure Development Corporation - Andhra Pradesh

39819159 procurement and supply equipment and other items to 34 deic centers in a.p with a period of two years rate contract 1. equipment required for pediatrics 1 a paediatrics stethoscope ( 2 per deic ) 2 b sphygmomanometer with paediatric cuff 3 c direct ophthalmoscope 4 d paediatric auroscope 5 e ear speculum 6 f magnifying glass medium 7 g weighing machine ( both baby and adult ) 8 h knee hammer equipment’s required for dental – materials & consumables 9 a forceps set for extraction ( pedodontic ) 10 b wall mounted dental ray with rvg 11 c table top front loading autoclave ( electrical ) 12 d forceps set for extraction ( adults ) 13 e restorative filling and carving instrument: set 14 f elevators set of 10 ( ten ) 15 g contra angle handpiece 16 h dental ultrasonic scaler ( complete set ) 17 i composite filling instruments 18 j dental electric brushless micromotor 19 k led curing light source 20 l automatic water distiller 21 m mallet 22 n needle holder 23 o bone chisel 24 p x ray viewer 25 q stainless steel bin ( surgical ) 26 r hand scaler ( complete set ) 27 s portable dental darkroom 28 t mortar and pestle 29 u lead apron 30 v mouth mirrors ( pack of 10 ) 31 w probes ( pack of 10 ) 32 x explorers ( pack of 10 ) 33 y tweezers ( pack of 10 ) 34 z cheatle forceps 35 a1 plastic cheek retractors 36 b1 mouth props ( adult + pediatric ) set of 2 37 c1 cement spatula 38 d1 matrix band and retainer ( both no. 1 & 8 ) 39 e1 dental impression trays ( upper and lower ) 40 f1 rubber bowls 41 g1 plaster spatula straight and curved 42 i1 glass slab 43 j1 scalpel handle 44 k1 glass dapen dish sl. no. ( b ) dental consumables 45 a2 developer and fixer 46 b2 zno + eugenol ( 110 gm ) 47 c2 gic filling ( 15gm powder / 8g liquid ) 48 d2 gic luting ( 15gm powder / 8g liquid ) 49 e2 impression material alginate dust free ( 450g ) 50 f2 plugger 15 4 assorted set 51 g2 polishing paste ( 100g ) 52 h2 burs assorted for contra angle handpiece ( round, taper fissure, inverted cone ) 1 set 53 i2 composite kit with etchant and bonding agent 54 j2 composite syringes individual 55 k2 composite finishing and polishing kit 56 l2 dental iopa x ray film pedo 1 box 57 m2 dental iopa x ray film adult ( size 2 ) ( e speed ) 58 n2 diamond burs airotar handpiece assorted 59 o2 disposable dental suction tips ( 100 tips ) 60 p2 g.p points 15 80 assorted set 61 q2 h file set assorted 15 40, 45 80 ( 21 mm ) 62 r2 kfile set assorted 15 40, 45 80 ( 21mm ) 63 s2 mylar strip ( 8mm, 100 strips pack ) 64 t2 polishing brush and cup set of 5 65 u2 plaster of paris ( 5 kg ) 66 v2 zinc oxide powder ( 110g ) 67 w2 applicator tips for bonding agent 68 x2 pit and fissure sealant 69 y2 zinc phosphate cement 70 z2 etchant gel 37% phosphoric acid gel ( 9 ml ) 71 a3 dentin bonding agent ( 6g ) 72 b3 form cresol ( 30 ml bottle ) 73 c3 calcium hydroxide powder 74 d3 topical fluoride varnish 75 e3 matrix band no 1 76 f3 matrix bond no 8 77 g3 wedges wooden 78 h3 green loth bags for autoclaving instruments 79 i3 black silk suture 3 o 80 j3 bp blade no. 15 ( set of 20 ) equipment’s required for physiotherapy / occupational therapy 81 1 therapy ball ( a ) 65 cm ( b ) 45 cm 82 2 therapy mats 6ft x 3ft 83 3 bolster ( a ) 2ft long, diameter 8’ inch ( b ) 2ft long, diameter 10’ inch 84 4 small roll 13 inch long, diameter 3 inch 85 prone wedge ( a ) big height ( b ) small height 86 6 balance board 87 7 kaye walker ( height 48 64 cm ) 88 8 trampoline 89 9 bolster swing 90 10 wooden benches with cushion and rexine cover 91 11 splints ( ankle foot orthosis ) 92 12 special chairs with cut out tray ( tailor made according to need of the child ) 93 13 theraputty ( big ) 94 14 peg board 95 15 ball pool 96 16 ball of different size 97 17 gaiters ( set of 16 for each 16 deic ) equipment’s required for play area & physiotherapy / occupational therapy 98 a swing 99 b slides 100 c see saw 101 d tunnel length 6 ft 102 e tricycle 103 f locally suitable toys ( set of 3 ) 104 g toys ( for play and stimulation ) 105 h small rattles 106 i squeaky 107 j puja bell ( clapper bell ) 108 k soft toy 109 l bruch for tactile stimulation 110 m thick handle spoon 111 n thick handle bent spoon 112 o plastic spoon with long handle ( for babies ) 113 p plastic glass with rim cut on one side 114 q stainless steel plates with high time 115 r spouted cups equipment’s required for laboratory 116 a automated blood cell counter ( 3 part ) 117 b microscope 118 c semi automated analyzer 119 d digital hemoglobinometer 120 e test tubes ( pack of 100 ) 121 f empty vials ( pack of 100 ) 1oml equipment required for office 122 1 desktop and ups 123 2 all in one ( printer + scanner + photocopier ) 124 3 android television ( 40 5o inc ) 50 125 4 computer table equipment required for sensory integration 126 1 pin spot and mirror ball bundle 127 2 mirror ball motor 128 3 led mirror ball 129 4 fire ball mounted on the roof 130 5 sound activated light 131 6 led bubble tube 132 7 optic fibres ( per 1000 mts ) rs. 12 / per meter 133 8 blue led lights 134 9 150 bulb blue led light chain 135 10 bubble tube 136 11 rotating drum 137 12 chime frame and beater 138 13 mirror chime bout 14 swings: 139 a bolster swing 140 b platform swing 141 c tyre tube swing 142 d rope ladder swing 143 15 rhythmic rocker 144 16 balance boards 145 19 bean bags including white toys 146 20 real size animal toys ( set of 2 ) ...

Due Date : October 26, 2023

Tender Value : ₹ Ref. Documents

View Tender
30
South Central Railway - Andhra Pradesh

39772006 auction sale of heavy melting :actual lot no. 03122309 0517. pl no.98050047 (15) (hsn code 72044900 gst18% on rcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : September 28, 2023

Tender Value : ₹ Ref. Documents

View Tender
31
South Central Railway - Andhra Pradesh

39621307 auction sale of casnub bogies : actual lot no. 03122309 0210b . pl no. 98117117 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 1 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : September 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
32
Tirumala Tirupati Devasthanams - Andhra Pradesh

39540385 operation and maintenance including water treatment of sri pat pushkarini at tiruchanoor for two years 2023 24 and 2024 25 , maintenance and operation with semi skilled and unskilled workers for sri pat pushkarini water treatment engaging of semiskilled unskilled workmen for attending with uniform pump drivers helpers and man mazdoors for operation and maintenance of the pressure filters and including pumping the water to pressure filter with the existing pumps any other pumps erected for required quantities and cleaning back washing and operation of pressure filters mixing of chemicals in to sri pat pushkarini daily etc as directed during execution for sri pat puskarini at tiruchanoor. the workmen shall be available at site for attending duty in 2 shifts and necessary weekly off arrangements are to be made by the contractor. the man power are four 4 semiskilled and four 4 unskilled including weekly off provision., providing chemical treatment to sripat pushkarini water sodium hypochlorite 12.50 o / o or 0.125 grms / ltr chlorine content ( nacl ) , providing chemical treatment to sripat pushkarini water with poly electrolyte to settle the suspended particles p e, providing chemical treatment to sripat pushkarini water with aluminium sulphate for better coagulation and settlement al2so4, providing chemical treatment to sri pat pushkarini water with synthesis make hydrochloric acid for neutralising the water to maintain ph between 7 .2 to 7 .6 hcl, supply of the laboratary chemicals koo2 h2s bottle, supply of the laboratory chemicals o tolidine 500 ml, supply of the laboratory chemicals universal indicator 100 ml, supply of the laboratory chemicals chloroscops, annual maintenance of air compressor of pushkarini of sri padmavathi ammavari temple tiruchanoor monthly visits for tiruchanoor pat temple, supply of spare parts of air compressor at pat temple main bearing bushes, supply of spare parts of air compressor at pat temple suction air filter elements, supply of spare parts of air compressor at pat temple big end bearing, supply of spare parts of air compressor at pat temple gudgen pin, supply of spare parts of air compressor at pat temple 250 mm dia sealing rings, supply of spare parts of air compressor at pat temple 210 mm dia bearing rings, supply of spare parts of air compressor at pat temple 210 mm dia sealing rings, supply of spare parts of air compressor at pat temple gland packing rings, annual maintenance of air compressor of pushkarini of sri padmavathi ammavari temple tiruchanoor 35 mm dia unloading piston o rings, supply of spare parts of air compressor at pat temple delivery valve cover o rings, supply of spare parts of air compressor at pat temple piston 35 mm dia, supply of spare parts of air compressor at pat temple valve plate 105 mm dia, supply of spare parts of air compressor at pat temple spring plate 0.60 mm, supply of spare parts of air compressor at pat temple spring plate 0.90 mm, supply of spare parts of air compressor at pat temple suction valve assembly cr11, supply of spare parts of air compressor at pat temple delivery valve assembly cr11, supply of spare parts of air compressor at pat temple rlx suction valve assembly, supply of spare parts of air compressor at pat temple oil scraper ring, supply of spare parts of air compressor at pat temple enc 10 150 grade oil, supply of spare parts of air compressor at pat temple piston guide panel filter, supply of spare parts of air compressor at pat temple balancing nut, rewinding of the 30.0 hp electric motors with suitable gauge insulated pvc copper wire varnishing , tapping, fitting complete with over hauling and replacement of terminal plate / minor hard ware items viz, soldering, testing of out going wires, bolts and nuts, painting with approved color etc., and keep the motors in good condition including all taxes., providing , laying, testing and commissioning of following classes ms pipes conforming to is 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. makes: jindal / hissar / tata pipes / prakash surya .....200 mm dia b class, providing , laying, testing and commissioning of following classes ms pipes conforming to is 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. makes: jindal / hissar / tata pipes / prakash surya ......150 mm dia b class, providing , laying, testing and commissioning of following classes ms pipes conforming to is 3589 and 1239 including fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc., complete. makes: jindal / hissar / tata pipes / prakash surya .......100 mm dia b class, painting with ready mixed synthetic enamel paint in all shades grade ii approved colour and make over a priming coat with ready mixed red oxide metal primer paint ( total three coats ) including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete, manufacture, supply and delivery of 200 mm . dia ci wafer lug type butterfly valves conforming to is 13095 / 1991 ( reaffirmed 1998 ) excluding transportation, ced and taxes etc., complete. operation done with worm actuator isi marked rate at ex factory, supply and delivery of pn 1.6 ( mpa ) 100 mm dia resilient seated soft sealing gate valves sluice valves with body and bonnet of ductile iron ggg 40 sg 400 15 or ggg 50 sg 500 7 or equivalent as per is1865, is:3896 2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3 o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100 percent leak proof with face to face dimensions as bs:5163 type a / is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside ( min 250 microns ) ral 5005 with pocket less straight through body passage conforming to design standards of din 3202f4 / bs:5163 type a flange drilling as per is 1538 excluding all taxes, duties and transportation. without by pass, engaging of labour for cleaning of pushkarini base for removal of algae, vegetation and un wanted materials to keep the base clean for occasions and regular maintenance of pushkarini un skilled workers...

Due Date : September 25, 2023

Tender Value : ₹ Ref. Documents

View Tender
33
South Central Railway - Andhra Pradesh

39519112 auction sale of actual lot no. 03122309 0525. pl no.98050047 (15) (hsn code 72044900 gst18% on rcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, rail pcs below 1 meter,door rests and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. this includes the qty. available at lot nos. 316a,411b location: road no. 3,2,1 to 4 cross road (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : September 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
34
South Central Railway - Andhra Pradesh

39519106 auction sale of actual lot no. 03122309 0122. pl no. 98050060 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable cs scrap of draft gear parts and draft gear followers, bogie wedges of sorts and sizes full or cut with or without attachments. location road no.1 this includes the qty. available at lot nos. 0127a (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : September 14, 2023

Tender Value : ₹ Ref. Documents

View Tender
35
South Central Railway - Andhra Pradesh

39485756 auction sale of actual lot no. 03122309 0623 pl no.98050047 (15) (hsn code 72044900 gst18% on rcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, skids, cross key screw & wrench ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

View Tender
36
South Central Railway - Andhra Pradesh

39485719 auction sale of actual lot no. 03122309 210a . pl no. 98117117 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 1 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : September 12, 2023

Tender Value : ₹ Ref. Documents

View Tender
37
Department Of Defence - Andhra Pradesh

39385925 bids are invited for procurement of liferaft and dc items life raft 20 men capacity , fibre glass cloth 0.5mm thick 1m width , wooden mallet , wedges hard wood 150x75x25mm , plug sq soft wood 75x20x12mm total quantity : 23...

Due Date : September 08, 2023

Tender Value : ₹ 16 Lakhs

View Tender
38
South Central Railway - Andhra Pradesh

39341117 supply of high performance v belt dongil escon belt spax 1380 suitable for chicago pneumatic compressor of 30 hp. preferable makes: 1 ) euro zeta %u2013 raw edges cogged wedge belt to pt.no.spax 1380 2 ) fenner powerflex raw edge cogged belt to pt.no.spax 1380 3 ) d & d power drive belt to pt.no.spax / xpa 1380 4 ) esso power belt to pt.no.spax 1380. [ warranty period: 30 months after the date of delivery ] ...

Due Date : September 05, 2023

Tender Value : ₹ Ref. Documents

View Tender
40
Department Of Defence - Andhra Pradesh

39240942 bids are invited for procurement of nbcd items clamp emm 230x190 mm for use with 150mm shore , circular stopper plate complete fittings , dcp bag 5 kg capacity , band multipurpose for 50mm 100mm dia pipes , anti flash gloves , anti flash hood , battery alkaline 1.5v lr 6 , spanner wheel 305mm af , oakum white , file 300mm bastard rough flat width 25mm with handle , splinter box 250x250x127mm , wooden mallet medium , hard wood wedge , wedge soft wood 125x50x25mm thick , timber planking 75x225x3000mm , m seal , wedges hard wood 150x75x25mm , pyrotech light stick 8 inch , jubilee clip 30mm 50mm 100mm as per is 4762 size type a , plug sq tapered soft wood 150mmx50mmx25mm , plug sq tapered soft wood 75mmx25mmx18mm , plug sq tapered soft wood 75mmx20mmx12mm , plug sq tapered soft wood 150mmx75mmx50mm , plug sq tapered soft wood 100mmx38mmx25mm , foam liquid afff 20 ltrs plastic container , plug sq tapered soft wood 300mmx150mmx100mm total quantity : 193...

Due Date : August 31, 2023

Tender Value : ₹ 16 Lakhs

View Tender
42
South Central Railway - Andhra Pradesh

39178577 auction sale of actual lot no. 03122308 0630 pl no.98050047 (15) (hsn code 72044900 gst18% on rcm basis) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : August 23, 2023

Tender Value : ₹ Ref. Documents

View Tender
43
South Central Railway - Andhra Pradesh

39178576 auction sale of actual lot no. 03122308 0612. pl no. 98117117 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable released casnub bogies of side frames bolsters with or without attachments of spring planks brake beams push rods equalising levers springs adopters wedges, brake blocks and rubber pads. (gas cutting only two cuts is permitted to loadable size for lorry). location road no. 1 to 4 cross road (image attached) (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )...

Due Date : August 23, 2023

Tender Value : ₹ Ref. Documents

View Tender
45
Sri Padmavati Mahila Visvavidyalayam - Andhra Pradesh

39137314 supply and installation of engineering physics laboratory equipment at k.l.rao block, soet, sri padmavati mahila visvavidyalayam, tirupati. , screw guage ss 25mm wrights and moores type, vernier callipers 150mm, spectrometer dispersive power of prism / grating, youngs modulus non uniform bending pin and microscope, determination of rigidity modulus of given wire torsion pendulum, calibration of voltmeter / ammeter using potentiometer, air wedge determination of thickness of given thin wire, v i characteristics of pn junction diode, determination of acceleration due to gravity and radius of gyration compound pendulum, determination of fermi energy. ( measurement of fermi energy in copper ) ., determination of plancks constant, energy band gap of semi conductor diode, four probe resistivity measurement, field along the axis of a circular coil, the refractive index of a liquid by using convex lens, to study the truth tables of various basic logic gates...

Due Date : August 24, 2023

Tender Value : ₹ Ref. Documents

View Tender
46
South Central Railway - Andhra Pradesh

39058061 auction sale of actual lot no. 03122308 0530. pl no.98050047 ( 15 ) ( hsn code 72044900 gst18% on rcm basis ) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 ( image attached ) ( note: 1. if any ss / corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery ) ...

Due Date : August 15, 2023

Tender Value : ₹ Ref. Documents

View Tender
47
South Central Railway - Andhra Pradesh

38939589 auction sale of actual lot no. 03122307 0117a . pl no. 98050060 ( 15 ) ( hsn code 72044900 gst 18% on rcm basis ) scrap of cond. & unserviceable cs scrap of housings with or without spacers, wedges, of sorts and sizes full or cut with or without attachments. location road no.1 ( image attached ) ( note: 1. if any ss / corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery ) ...

Due Date : August 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
48
South Central Railway - Andhra Pradesh

38939576 auction sale of actual lot no. 03122307 0525. pl no.98050047 ( 15 ) ( hsn code 72044900 gst18% on rcm basis ) ms scrap of cond. & unserviceable heavy melting angle and channel pcs, rod pcs stands valves levers bolts and nuts rivets washers pins dv covers bushes brake shoes shackles shackle stones strips j bolts hand brake wheels latches toothed segments foot steps hanger brackets bevel gear wheels horizontal levers door hinges flanges wedges cut bits, ms sheets side barer housings pipe pcs. straps liners sheets pipe pcs. pins throwers locks races collars axle box covers, liners, and other misc items of wagons s&t and ttm sorts & sizes full or broken with or without attachments. location: road no. 3 ( image attached ) ( note: 1. if any ss / corten steel & non ferrous items found during loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery ) ...

Due Date : August 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
49
South Central Railway - Andhra Pradesh

38829670 auction sale of ms scrap 20.000mt delivery on actual weighment basis.lot no 5312230673gtlgymsap available with sse c and w gy. scrap, condemned, u / s released ms scrap consisting of 40 items as follows : 1. snubber wedges, 2. articulated lock lift lever assembly, 3. hand brake wheel ( side operated ) , 4. operating lever ( coupler rod ) , 5. broken sab?s, 6. broken draft gears, 7. cross bars, 8. broken break beams support, 9. front followers, 10. yoke pins, 11. broken / bent gear pins12. broken / bent m.s angular, 13. knuckle pins, 14. foot step for hand brake wheels, 15. bolt & nuts, 16. pu pad top & bottom iron cups, 17. bcn door cotters long & short, 18. side bearer housing, 19. stricker casting wear plate20. door way stiffner, 21. load empty gear box, 22. end pull rod & push rod, 23. control rod, 24. wear plate for break beam ( pocket liner ) , 25. cut off angle cock, 26. door hinge & pins, 27. main pull rod long & short, 28. lock for cbc, 29. bolster side frame friction liner, 30. liner for bolster, 31. empty tie rod, 32. brake shoe keys, 33. broken brake cylinders, 34. broken auxilary reservoirs, 35. load empty bracket long, 36. load empty bracket small, 37. shaft bearing with sign plate, 38. bearing pieces, 39. shank wear plate, 40. other c& w broken parts, total quantity: 20.000mt approx. available in gooty boxn roh depot, behind atc. ds 8 no 531200016 dt: 01.06.23. hsn code: 720429 / 18% ) note to the bidders 1 ) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2 ) post auction no representation shall be entertained.3 ) for photos of this lot, kindly click on view lot image on bottom left side.4 ) gas / chisel cutting is permitted , if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc.5 ) in case purchasers require usage of any railway assets / materials such as electricity / forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6 ) it is the responsibility of the purchaser / bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7 ) clubbing of the lots, what so ever, is not permitted for loading. 8 a ) in case the proprietor / owner of the firm, wishes to effect the delivery of the lot personally, he / she should collect the original do copy and delivery point letter, duly appending his / her specimen signature in this office, by submitting either aadhaar ( or ) pan card , so as to have genuineness in all aspects , from both ends.b ) in case the proprietor / owner of the firm, wishes to nominate a representative on his / her behalf , to effect the delivery of the lot, the representative should collect the original do copy and delivery point letter, duly appending his / her specimen signature in this office, by submitting original power of attorney filled in all aspects , along with either aadhaar ( or ) pan card of the representative , so as to have genuineness in all aspects , from both ends. 9 ) railways does not guarantee for quality , quantity description etc....

Due Date : August 01, 2023

Tender Value : ₹ Ref. Documents

View Tender
50
South Central Railway - Andhra Pradesh

38752357 supply of contact wire ending clamp ( 107 ) i.d.no: 1118 3 ( body ) and 1119 3 ( wedge ) , as per rdso drawing no eti / ohe / p / 1110 2, rev, e and rdso specification no: ti / spc / ohe / fittings / 0130 with a&c slip no:1, eti / ohe / 13 ( 4 / 84 ) may 2018 [ warranty period: 30 months after the date of delivery ] ...

Due Date : August 14, 2023

Tender Value : ₹ Ref. Documents

View Tender