39807288 bids are invited for anantapuram executive table , executive chair , metal chair , center table , teak chiar , sofa set , carpet , library table , chair , cat6 utp cable , jack panel , switch , face plate , pvc conduits , patch chord , wireless controller , access point furnishing of library hostels and academic block at cuap total quantity : 3777...
39774765 supply and fixing of furniture and work stations in the offices of 4th 5th floors in c far building, svims, tirupati , supply of executive table table made with 25 mm plb top 18 mm plb strip with look wise outer thickness 43 mm with plb body as per tender document as an attachment, supply and fixing of executive chair with neck support headrest fixed head rest made with pu moulded recsin upholstry as per tender document as an attachment, supply and fixing of executive table with side table of overall size main table 1820 mm ( l ) x 900 mm ( d ) x 750 mm ( h ) , with seperate side table 900 mm ( l ) x 750 mm ( d ) x 750 mm ( h ) as per tender document as an attachment, supply of table made with 25 mm plb top with 18 mm body with 2 mm edge binding and ms with powder coated frames size 1200 mm x 600 mm as per tender document as an attachment, supply of conference low back revolving chair made of nylon frame with nylon mesh upholstery with adjustable lumber support seat ply based pu moulded foam with fabric mesh covering with abs seat outer arms as per tender document as an attachment, supply of visitor chair back made of nylon frame with fabric small cushion with fabric uphosty. seat ply based pu moulded foam and fabric mesh covering. arms fixed arms connect to seat and back. as per tender document as an attachment, supply of mingle unitized 14 seater conferance table or equivalent with the following specification ( product outer to outer ) width 415 cm, depth 145 cm, height 73 cm with a tolerance of plus or minus 10 mm. as per tender document as an attachment, supply of kareena nxt mid back conference chair with the following specifications ( product outer to outer ) width 70 cm, depth 70 cm, height 95 to 105 cm with a tollerance of plus or minus 10 mm as per tender document as an attachment, providing teak wood diwan cot with following features. size of the diwan size shall be such that it should suitable for providing mattress of size 30 x 72 inch and cot height should not be more than 1feet 6 inch including with 6 inch mattresses from floor level. supports best country wood size of 2 x 2 inches size with 4 horizontal supports. as per tender document as an attachment, supply of foam mattresses of single block pu foam of standard make and design for diwan which offers superior resilience and bounce with ild number density is 28 kg per cum, covered with a premium fabric quilted with soft flexi pu foam on both sides. the size of the mattresses is 30 x 72 x 5 inches thick, as per tender document as an attachment, supply of pillow of size 27 x 17 inches of standard make and design filled with hollow conjugate siliconized polyester fiber for durability and softness. high quality polyester fiber fabric covering with dual stitching sides for better aesthetics. as per tender document as an attachment, supply of bed side table of size 18 x 15 inches and height 15 inches having one drawer and bottom open section. the drawers are equipped with telescopic metal channels fitted with bushes for smooth noiseless operations and with handle sizes with 18 mm thickness of body and 9 mm thick for draw as per tender document as an attachment, supply of 3 seater sofa 3 seater made with seat and back metal insert with 25 mm od with 1.6 mm thickness frame with 45 density pu moulded foam with fabric upholstery seat foam thickness 4 inches and back foam thickness 3.5 inches and side foam thickness 3inches fitting connecting pipe 50 mm od with 1.6 mm thickness with complete knock down system. as per tender document as an attachment, supply of full height dresser table of min sizes ( 23 x 71 inches ) with clear 5 mm thick mirror ( saint gobion make ) of size and with required designs and supports materials particle board or processed engineering boards, minimum 18 mm thick with thorough intense antipest treatment for protection against termites, borers and pests. finishing laminating sheet covering with minimum 1 mm thick with machine edge binding as per tender document as an attachment, supply and fixing of 3 door wardrobe of minimum size 53 x 21 x 78 inches of minimum with openable shutters, mirror fixed over one shutter and two drawers and other shelves as per requirement of the department with required lock or keys of godrej make and ss handles.structure should be covered with boards which should not be less than 18 mm thick for front and sides and for internal and rear sides with 12 mm thick. as per tender document as an attachment, supply of two door wardrobe of minimum sizes 36 ( w ) x 18 ( d ) x 75 ( h ) inches with openable shutters mirror fixed over one shutter and two drawers and other shelves as per requirements of the department with required lock keys of godrej make and ss handles. structure should be covered with boards which should not be less than 18 mm thick for front and sides and for internal and rear sides with 12 mm thick. as per tender document as an attachment, supply and installation of desk based linear workstation size of the workstation 1200mm l x750mm dx 1050mm h with 8 mm thick laminated recessed glass panel as per tender document as an attachment, supply of high back revolving chair dimensions overall chair height 1250 mm, backrest along with headrest, seat height 450 mm, seat width 490 mm, seat depth 490 mm as per tender document as an attachment, supply of mobile pedestal made with ms powder coated size of 400mm x 450mm x 640mm ht. having two drawer and one filing drawer provided with handle and lock as per tender document as an attachment, supply of ms open rack of size 1940mm ( h ) x 900mm ( w ) x 445mm ( d ) with 6 panels. the vertical channel is 1.60mm and horizontal plate thickness is 0.80mm including fixing of bolts, corner plates etc complete to supply at ork site as per tender document as an attachment, supply and installation of table of size 1500mm x 750mm x 750mm h the table top is made up of 25mm prelaminated particle board which is edge banded with 2mm on all the exposed edges as per tender document as an attachment...
39711880 bids are invited for design manufacture supply and install of custom furniture like chairs sofas tables dining etc office chiar , training hall chairs , computer lab chair 1 , computer lab chair 2 , faculty chair , multi purpose chairs , conference hall chairs , highchairs , cafe chairs , tall stool with oak base , senate hall chair , mid back chairs , visitor chairs , dynafit trio , vaunt chairs , single seater sofa chair model 1 , single seater sofa chair model 2 , single seater chair model 3 , single seater chair model 4 , single seater sofa chair model 5 , single seater sofa chair model 6 , single seater sofa chair model 7 , single seater sofa chair model 8 , single seater sofa chair model 9 , single seater sofa chair model 10 , single seater sofa chair model 11 , 2 seater lounge sofamodel 1 , 2 seater lounge sofa model 2 , 2 seater lounge sofa model 3 , 2 seater lounge sofa model 3 , 3 seater lounge sofa model 1 , 3 seater lounge sofa model 2 , 3 seater lounge sofa model 3 , 3 seater lounge sofa model4 , 3 seater lounge sofa model 5 , continuous lounge sofas , round sofa , privato hexo discussion pod for two user with sofa and table , round table model 1 , round table model 2 , round table model 3 , rotomoulded coffee table , burin table , side tablemodel 1 , side table model 2 , side table model 3 , project table , conference table , steel almirahs , steel lockers , slotted angle steel rack , chart worktable , stool chair , chart stowage table , teakwood dining table model 1 , teakwood dining chair model 01 , teakwood onyx dining table model 2 , teakwood dining chair model 2 total quantity : 2184...
39708093 bids are invited for kitchen machinery, equipment and furniture ( q3 ) duel desk principal & vice principal table office tables teachers table 12 seaters meeting table library table computer table library open book shelf glass door storage almyrah metal almyrah 3 seater sofa steel bedsincluding sick room bedding hard foam metal table with integrated storage dining table with attached stools ( 8 seater ss top fixed canteen table 2400 x 750 lab stools executive chair visitors chairs chair without arm personal locker unit magnetic white board green writing melamine surface non magnetic chalk board total quantity : 8800...
39700035 preparation cushan sofa sets to vip galary at ad building belongs to srikalahastheeswara swamyvari devasthanams, srikalahasti, tirupati district...
39656282 bids are invited for office furniture 1 multipurpose wooden tables ( size 4x5x2.5 sq feet ) 2 wooden chairs 3 single seater sofa 4 sofa set ( 3+1+1 ) with leather covers 5 dressing table 6 adjustable stools 7 two seater with round table 8 centre table 9 customized crockery cabinet 10 retro cabinet at reception area 11 customized display tables total quantity : 58...
39646151 providing furniture and work stations for new paediatric super speciality hospital in the premises of svims, tirupati , supplying and placing bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated and curved with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated / chrome finish . there shall be ppcp shoe provided at the base to avoid scratches on the floor. overall length for three seater in mm : 1800 mm, overall length for two seater in mm : 1200 mm, overall depth in mm: 650mm, overall height in mm: 760 mm, seat height from floor in mm: 450 mm, waiting chair as approved by engineer in charge / employer. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . two seater, supplying and placing bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated and curved with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated / chrome finish. there shall be ppcp shoe provided at the base to avoid scratches on the floor. overall length for three seater in mm: 1800 mm, overall length for two seater in mm : 1200 mm, overall depth in mm: 650mm, overall height in mm: 760 mm, seat height from floor in mm: 450 mm, waiting chair as approved by engineer in charge / employer. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . three seater, providing and placing reception table reception work surface top 25 mm thick in bwp grade plywood at 750 mm ht. side gable end 25 mm thick in bwp grade plywood. reception table modesty 25 mm thick in bwp grade plywood of 1100 mm ht, working table top have wire manager hole cut for passing the wires. ledge top ( white ) of 200 mm ( d ) and below the ledge top 200 mm ( d ) 25 mm thick in bwp grade plywood supported with studs. front white panel in 25 mm bwp grade plywood. led light to be placed behind front panel. all exposed edges sealed with 2 mm thick pvc edge banding tape. table shall have 2 plus 1 filling fixed drawer made of 18 mm bwp grade plywood. size of the drawer is 400x450x725 mm ( ht ) . drawers should be on the levellers. table should have metal cable tray duly powder coated below table top for electrical points ( without switch and socket plates ) . metal wire riser for carrying wires. .size 1800 ( w ) x 600 ( d ) x1100 ( ht ) mm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and supplying a mid back chair with ergonomic design, comfortable and aesthetically appealing. the seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg / m3 and the back shall be made of moulded plywood padded with high resilience polyurethane foam having density 32kg / m3. the seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 gsm. the backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. the chair shall be supplied with aluminium die cast with cushion arm having leatherite top completely joint with seat. for seating durability the chair shall have multi angle synchro tilt mechanism with 360 degree revolving and tilt tension adjustment which provides back strength for the chair., providing and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 48 kg / m3 in seat and having density 32 kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam density 32 kg / m3. the structure shall be upholstered with fabric tapestry and. the sofa shall be supported on wooden leg .there shall be shoe provided at the bottom to avoid scratches on the floor. two seater sofa: dimensions length 120 cm 180 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm.three seater sofa : dimensions length 180 cm 250 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) .two seater, providing and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 48 kg / m3 in seat and having density 32 kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam density 32 kg / m3. the structure shall be upholstered with fabric tapestry and. the sofa shall be supported on wooden leg .there shall be shoe provided at the bottom to avoid scratches on the floor. two seater sofa: dimensions length 120 cm 180 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm.three seater sofa: dimensions length 180 cm 250 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . three seater, providing and placing center table. table of size 900 ( d ) x 900 ( l ) x 450 ( ht ) .the table top shall be made out of solid seasoned wood, finished with semi matt polished of approved shade, design and colour. the table having same size of plain and clear glass in the table top. table having buffer for on the bottom for avoid the scratches on the floor. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., fowler bed delux ( abs panel ) fowler bed should be of following minimum dimension: 2030 mm l x 900 mm w x 600 mm h ( without mattress ) .*bed frame must be sturdy and stable to support weight of at least 135 kg. the frame structure should be made up of at least 16 g crc, rectangular pipe of 60mm x30mm / circular pipe of size 30mm*bed frame mounted on round / rectangular tube, fitted with 125 mm castors, 2 with breaks and having rustproof body.*all adjustments for fowler position must be obtained from crank shaft, manually operated with stainless steel foldable handle on both the shaft.* the finished bed must be rust proof, pre treated and treated with epoxy polyester antimicrobial powder coated to increase the bacteriostatic property as per tender document as an attachment, providing and placing bed side locker deluxe of overall sizes 400 ( w ) x 400 ( d ) x 800 ( h ) mm. crca sheet constructions. having one box and one drawer. s.s top with three sides raise edges. epoxy powder coated. drawer having recessed type of handle for opening of the drawer. mounted on the castors. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing revolving stool with ms tubular four leg construction with ms foot rest ring duly epoxy powder coated. top size 400 mm and 650 mm ht. top made up of ss finish. adjustable revolving top with height adjustment with ms screw mechanism. the stool having rubber stumps. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing examination table of size: 1800 ( l ) x 500 ( d ) x 750 ( ht ) mm. bed is made up of ms duly finished with epoxy powder coated. bed top is in two part, head rest is adjustable. under structure in ms tubular legs duly powder coated with rubber stumps. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing stretcher trolley as per photograph of size 2130 ( w ) x 560 ( d ) x 810 ( ht ) mm. m.s tubular construction with ms removable stretcher. mounted on 150mm dia. castors ( two with brakes and two nos of non brakes ) . epoxy powder coated.the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., supplying and placing of single bed for structure metal frame duly powder coated is used and plywood is used in bed seat as per the design. overall size 900x1980x800 / 500 ht. bed plinth height 420mm. inner frame 50 x 25mm with 25x 25 cross members at min. bed seat is made up of 12mm plywood with white laminate lipping on all edges. complete with all necessary hardware ( without matterss ) of approved make. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves. table size: 1200 ( w ) x 600 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1350 ( w ) x 750 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1400 ( w ) x 600 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1500 ( w ) x 750 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1700 ( w ) x 750 ( d ) x 750 ( h ) mm. side storage size: 1050 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1950 ( w ) x 750 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing cabinet .the storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. all exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree c with hot melt glue on special machines. the under structure shall be made out of 18 mm thick bwp grade plywood. the storage is having openable shutter with locking arrangement. the storage is having 18mm thk. bwp grade plywood shelves. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . size: 1650 ( w ) x 450 ( d ) x 750 ( ht ) mm, providing and placing cabinet .the storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. all exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree c with hot melt glue on special machines. the under structure shall be made out of 18 mm thick bwp grade plywood. the storage is having openable shutter with locking arrangement. the storage is having 18mm thk. bwp grade plywood shelves. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . size: 1700 ( w ) x 450 ( d ) x 750 ( ht ) mm., providing and placing ergonomically designed, comfortable and aesthetically appealing high back chair. the seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam having density 48 kg / m3. the seat shall be upholstered with fabric tapestry 0.8mm thick and 300 gsm and the back shall be made of polypropylene net cover with breathable mesh tapestry. the backrest shall be made by keeping contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. the chair shall be supplied with pu adjustable arms. the chair shall have synchro tilt mechanism with 360 degree revolving with upright position locking. the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with bifma standard class 3 gas lift to suit them using the lever under the seat. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing table and mobile pedestal as per photograph. the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. pedestal are made of 18mm thick bwp grade plywood with 2 drawer plus 1filing .the drawer are made mobile with use of castors. the drawer units are provided with center locking arrangement. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . table size: 1200 ( w ) x 600 ( d ) x 750 ( ht ) mm., providing and placing table and mobile pedestal as per photograph. the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. pedestal are made of 18mm thick bwp grade plywood with 2 drawer plus 1filing .the drawer are made mobile with use of castors. the drawer units are provided with center locking arrangement. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . table size: 1400 ( w ) x 750 ( d ) x 750 ( ht ) mm., providing and placing table and mobile pedestal as per photograph. the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. pedestal are made of 18mm thick bwp grade plywood with 2 drawer plus 1filing .the drawer are made mobile with use of castors. the drawer units are provided with center locking arrangement. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . table size: 2400 ( w ) x 750 ( d ) x 750 ( ht ) mm., supplying and placing of executive table. size of the main table 2400 mm x 750 mm x 750 mm. side storage size: 1650 ( w ) x450 ( d ) x650 ( ht ) .work surface made of 50 mm thick bwp grade plywood. modesty panel made of 18 mm thick bwp grade plywood. under structure made of 50 mm thick bwp grade plywood. side unit shall belong to the same family and shall have overall dimensions of 1650 mm x 450 mmx 600 mm. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement. the storage is having 18mm thk. bwp grade plywood shelves. pedestal size 400 ( w ) x 450 ( d ) x 600 ( ht ) mm. pedestal are made of 18mm thick bwp grade plywood with 2 drawer plus 1filing.the drawer are use of castors. the drawer units are provided with center locking arrangement. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., supplying and placing a high back chair with ergonomic design, comfortable and aesthetically appealing. the seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg / m3 and the back shall be made of moulded plywood padded with high resilience polyurethane foam having density 32kg / m3. the seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 gsm. the backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. the chair shall be supplied with aluminium die cast with cushion arm having leatherite top completely joint with seat. for seating durability of the chair shall have multi angle synchro tilt mechanism with 360 degree revolving mechanism and tilt tension adjustment which provides back strength for the chair., providing and placing a three seater sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 48kg / m3 in seat and having density 32kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam density 32kg / m3. the structure shall be upholstered with leatherite tapestry. the sofa shall be supported on wooden leg . there shall be shoe provided at the bottom to avoid scratches on the floor. three seater sofa : dimensions length 180 cm 250 cm, depth 90cm 100 cm, seat height 30cm 40cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing a single seater sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 48kg / m3 in seat and having density 32kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam density 32kg / m3.the structure shall be upholstered with leatherite tapestry. the sofa shall be supported on wooden leg. there shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa : dimensions length 75 cm 100cm, depth 90cm 100cm, seat height 30cm 40cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and fixing centre table size 1200 ( w ) x 600 ( d ) x 425 ( ht. ) mm. the table top shall be made out of wooden frame with glass top. under structure in wooden with polish.the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and fixing side table. size 600 ( w ) x 600 ( d ) x 425 ( ht. ) mm. the table top shall be made out of wooden frame with glass top. under structure in wooden with polish. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., supplying and placing of conference table of size: 2250 mm ( w ) x 1100 mm ( d ) x 750 ( ht ) . the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. all exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree c with hot melt glue on special machines. the under structure loop legs shall be made of crca pipe section of size 60x30mm of thickness 1.2mm. the leg shall be connected with beam of thickness 1.2 mm. all these legs and beams shall be fitted to each other by connectors and necessary hardwares. the legs shall be having adjustable leveller shoe. this leveller shoe shall be provided at bottom of leg which allow 10 20mm adjustment for floor unevenness. the all legs and beams shall be duly finished with powder coating in desired shade / colour. powder coating shall be 40 60microns thickness. the beam shall be made of crca pipe of thickness 1.2 mm. the metal flipper is fixed on worktop of size 400 x 120mm switch socket with metal cable tray below table top for electrical points with centre leg for carrying wires. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing of cafe table . size: 1600 mm ( w ) x 650 ( d ) x 750 ( ht ) .the top shall be made out of 25 mm thick bwp grade plywood. the under structure shall be made out of ms chrome frame. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing in position chair . chair seat and back made up of hi quality polished ply. the chair shall be supplied with metal frame and the under structure shall be supported on four legs made up of round chromed 18 gauge steel tube frame . there shall be ppcp shoe provided at bottom to avoid scratches on the floor. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and supplying auditorium chair push back of standard size as per design. seat inner frame injection moulded ppcp inner seat frame with 4 fly nuts embedded cushion 45 plus density polyurethane foam cushion 100 percent polyester fr fabric. seat. fabric 100 percent polyester fr fabric. back inner frame 25mm x 5mm x 3mm ms flat made back inner frame with threading holes cushion 45 plus density polyurethane foam cushion seat. fabric 100 percent polyester fr fabric. quillting laminated with 5mm foam underlay with polyester lining underneath. back cover back side of the back covered with injection moulded ppcp cover. push back total weight 8.25 kg, providing and placing a personal locker in perfectly upright and straight position. the overall size of the personal locker is 380 ( w ) x 450 ( d ) x 1830 ( ht ) mm. the personal locker shall have 6 nos. of doors. it shall be ( like top, side, back, door, shelf etc. ) made of 0.8mm thickness high yield strength crca sheet of grade d confirming to is 513. the main frame and base shall be semi welded and folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg. the door shall be operated with aesthetically appealing snap fit abs plastic handle and concealed crank hinge. adjustable leveller shall be provided with metal insert to resist scratches on the floor and also level and support structure. the structure shall be supplied duly powder coated with 40 50 microns with 7 tank pre treatment process. locker shall have individual locking arrangement. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing class room chair ergonomically designed for user comfort and shall have aesthetically appealing design. the seat shall be made of 12 mm thick hot pressed plywood upholstered with high resilience polyurethane foam having density 48kg / m3 with fabric tapestry of 300 gsm and the back shall be made of polypropylene. the arm shall be provided ms chrome plated having dia. 25.4 mm with pp on top for comfort. the frame structure shall be four legged support type made up of chrome plate round pipe. there shall be ppcp shoe provided at the base to avoid scratches on the floor. seat width ( w ) 490mm, seat depth ( d ) 490 mm, seat height 450 mm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., supplying and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately.the frame shall be padded with high resilience polyurethane foam having density 48 kg / m3 in seat and having density 32 kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 32 kg / m3. the complete structure shall be fully upholstered with leatherite tapestry 0.7mm thick and 535 gsm. the under structure shall have ms leg. there shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa: dimensions length 75 cm 100 cm, depth 90 cm100 cm, seat height 30 cm 40 cm.three seater sofa: dimensions length 180 cm 250 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . single seater sofa, supplying and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately.the frame shall be padded with high resilience polyurethane foam having density 48 kg / m3 in seat and having density 32 kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 32 kg / m3. the complete structure shall be fully upholstered with leatherite tapestry 0.7mm thick and 535 gsm. the under structure shall have ms leg. there shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa: dimensions length 75 cm 100 cm, depth 90 cm100 cm, seat height 30 cm 40 cm.three seater sofa: dimensions length 180 cm 250 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . three seater sofa, providing and placing of single bed as per photograph without box made of best quality bwp grade plywood for structure and plywood is used in bed seat as per the design. overall size 900 x1800 mm. bed height 420 mm. inner frame 50 x 25 mm with 20 x 20 cross members at min. bed seat is made up of 12 mm plywood lipping on all edges. complete with all necessary hardware ( without matterss ) of approved make. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., panel based partition of 60 mm thickness with framework made of aluminium alloy extrusions. all aluminium parts are duly finished with powder coating in desired shade / colour. powder coating shall be 40 60microns thickness and shall be pre treated for seven stage anti corrosion treatment followed by epoxy powder coating. middle member in aluminium alloy extrusion of size 60 x 30 mm having thickness of 1.2 mm duly epoxy polyester powder coated. bottom raceway / skirting in aluminium alloy extrusion of size 100mm ht. having thickness of 1.5 mm duly epoxy polyester powder coated. intermediate raceway ( optional ) wherever is required above / below worktop, in aluminium alloy extrusion of size 100 mm ht. linear workstation size: 1200 ( w ) x 600 ( d ) x 750 ( h ) mm with mobile drawer, panel based partition of 60 mm thickness with framework made of aluminium alloy extrusions. all aluminium parts are duly finished with powder coating in desired shade / colour. powder coating shall be 40 60microns thickness and shall be pre treated for seven stage anti corrosion treatment followed by epoxy powder coating. middle member in aluminium alloy extrusion of size 60 x 30 mm having thickness of 1.2 mm duly epoxy polyester powder coated. bottom raceway / skirting in aluminium alloy extrusion of size 100mm ht. having thickness of 1.5 mm duly epoxy polyester powder coated. intermediate raceway ( optional ) wherever is required above / below worktop, in aluminium alloy extrusion of size 100 mm ht. linear workstation size: 1400 ( w ) x 750 ( d ) x 750 ( h ) mm with side unit 900 x 450 x750 ( ht ) , providing and placing ergonomically designed, comfortable and aesthetically appealing mid back chair. the seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam having density 48 kg / m3. the seat shall be upholstered with fabric tapestry 0.8mm thick and 300 gsm and the back shall be made of polypropylene net cover with breathable mesh tapestry. the backrest shall be made by keeping contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. the chair shall be supplied with pu adjustable arms. the chair shall have synchro tilt mechanism with 360 degree revolving with upright position locking. the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with bifma standard class 3 gas lift to suit them using the lever under the seat....
39593310 bids are invited for for administrative block mse exemption for turnover yes startup round sofa , reception lounge worktable , reception lounge mid back chairs , reception lounge sofa model 1 8 seater , reception lounge sofa model 2 , reception lounge sofa model 3 , reception lounge sofa model 4 , reception lounge sofa model 5 , reception lounge sofa model 6 , supdt room cubicles with steel line tables , supdt room wrap tables , supdt room office chair , supt room visitor chair , inspector room work station model 1 , inspection room workstations model 2 , inspector room office chair , inspection room workstations model 3 , inspection room x line chair , inspector room medium height storage , inspector room low height storage , security room table , security room chair , single side library rack , double side library rack , buddy center table round , vaunt chair , cafe table , cafe chair , board room conference table , board room conference chairs , stand alone table model 1 , misc chair , stand alone table model 2 , stand alone table model 3 , stand alone table model 4 , stand alone table model 5 , stand alone table model 6 , reception desk design manufacture supply and install of custom furniture total quantity : 1474...
39521135 providing furniture for technical support unit in the command control room of the commissioner, school infrastructure, education department located in prime hill crest, near dgp office, vaddeswaram ( v ) of mangalagiri ( m ) in guntur district. , linear workstation big size, linear workstation small size, mobile pedestal, l shape workstation, commissioner chamber table, officers cabin tables, project director table, peshi cabin table, conference table, storage with planter box, imported sofa, rectangle centre table, office chair, conference table additional chairs, project director cabin chair, officers cabin chairs, reception table, laptop table, commissioner main chair, commissioner room visitor chairs, commissioner room waiting lounge sofa, commissioner anti room cafeteria table, commissioner anti room cafeteria chairs, rectangular cafeteria table, cafe chair...
39483724 bids are invited for procurement of furniture almirah steel medium , visitor chair with arms , display board , looking mirror , side rack , steel stool , table office , table office clerk , office chair , chair revolving , table computer , chair computer , sofa set , notice board , almirah steel large , mirror with shelf , personal locker , compact , book case , tool storage , pcb storage total quantity : 165...
39470493 bids are invited for boq1 almirah steel medium boq2 almirah large ½ h ½ s steel boq3 bath stool boq4 bed hard boq5 book shelf boq6 bin linen multi purpose boq7 chair dining with cushioned boq8 chair dinning boq9 chair easy set of 3 boq10 chair verandah boq11 chair writing boq12 chair computer boq13 charpoy folding ip with hard top boq14 charpoy ip nylon newar with hard top boq15 chair school with hand board boq16 hat stand with mirror boq17 ladder aluminium boq18 peg table boq19 plate rack boq20 receptacle boq21 rack shoe steel boq22 side board boq23 peg set of 6 boq24 sofa set 4 seater boq25 sofa set 5 seater boq26 stool dressing boq27 table bed side boq28 table centre boq29 table dining for 6 persons boq30 table dining of size 120cmx90 cm boq31 table dressing ladies boq32 dressing mirror boq33 table writing boq34 table computer boq35 table of size 90x60 cms with drawers boq36 teapoy boq37 teapoy verandah boq38 trolley for television total quantity : 2427...
39458659 bids are invited for design manufacture supply and install of custom furniture like chairs sofas tables dining etc office chiar , training hall chairs , computer lab chair 1 , computer lab chair 2 , faculty chair , multi purpose chairs , conference hall chairs , highchairs , cafe chairs , tall stool with oak base , senate hall chair , mid back chairs , visitor chairs , dynafit trio , vaunt chairs , single seater sofa chair model 1 , single seater sofa chair model 2 , single seater chair model 3 , single seater chair model 4 , single seater sofa chair model 5 , single seater sofa chair model 6 , single seater sofa chair model 7 , single seater sofa chair model 8 , single seater sofa chair model 9 , single seater sofa chair model 10 , single seater sofa chair model 11 , 2 seater lounge sofa model 1 , 2 seater lounge sofa model 2 , 2 seater lounge sofa model 3 , 2 seater lounge sofa model 3 , 3 seater lounge sofa model 1 , 3 seater lounge sofa model 2 , 3 seater lounge sofa model 3 , 3 seater lounge sofa model 4 , 3 seater lounge sofa model 5 , continuous lounge sofas , round sofa , privato hexo discussion pod for two user with sofa and table , round table model 1 , round table model 2 , round table model 3 , rotomoulded coffee table , burin table , side table model 1 , side table model 2 , side table model 3 , project table , conference table , steel almirahs , steel lockers , slotted angle steel rack , chart worktable , stool chair , chart stowage table , teakwood dining table model 1 , teakwood dining chair model 01 , teakwood onyx dining table model 2 , teakwood dining chair model 2 total quantity : 2184...
39443632 bids are invited fordinning chair , sofa set 2 seater velvet cloth finish , sofa set 3 seater velvet cloth finish , sofa set 2 seater leathrite finish , centre table with ms frame and 18mm marine ply top finished with 1.0mm mica , dinning table , decorative led lights , sign board , washroom shed size 20x15 , perling , wooden ceiling , supply of vetrified tiles size 4x2 , supply of planters , artistic painting...
39427801 bids are invited for design manufacture supply and installation of factory made customized furniture laminated bent ply wall hanging headboard. size 2400mm l x 1200mm h x 150mm d , bed base. size 2030mm l x 1560mm w x 364mm h , bed side table. size 415mm w x 400mm d x 450mm h , queen size mattresses. size 1981mm l x 1524mm w x 152mm t , laminated bent ply wall hanging headboard. size 3110mm l x 1200mm h x 150mm d , bed base. size 2030mm l x 1800mm w x 364mm h , king size mattresses. size 1981mm l x 1828mm w x 152mm t , study table with pantry unit and shoe rack. size 2070mm l x 580mm d x 750mm h , wall mounted mirror. size 1980mm h x 600mm w x 36mm t , solid wood balcony chair with arms. size 585mm w x 900mm h x 700mm d x 450mm seating height , wall mounted tv ledge. size 1200mm l x 200mm w x 175mm h , round bent ply coffee table. size 464mm dia x 450mm h , bent ply study chair without arms. size 480mm w x 830mm h x 550mm d x 460mm seating height , bent ply room single seater sofa chair. size 660mm w x 840mm h x 812mm d x 415mm seating height total quantity : 2800...
39361887 providing furniture and work stations for new paediatric super speciality hospital in the premises of svims, tirupati , supplying and placing bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated and curved with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated / chrome finish . there shall be ppcp shoe provided at the base to avoid scratches on the floor. overall length for three seater in mm : 1800 mm, overall length for two seater in mm : 1200 mm, overall depth in mm: 650mm, overall height in mm: 760 mm, seat height from floor in mm: 450 mm, waiting chair as approved by engineer in charge / employer. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . two seater, supplying and placing bench. the seat and back shall be made up of high quality cold rolled ms perforated sheet of 1.2mm thick, pressed and welded to form the shape. the seat and back electrostatically coated and curved with epoxy powder and then cured under heat to allow it to form a skin. the armrest shall be made up of mild steel powder coated tube with 1.2mm thick. the base structure shall be supported by ms powder coated / chrome finish. there shall be ppcp shoe provided at the base to avoid scratches on the floor. overall length for three seater in mm: 1800 mm, overall length for two seater in mm : 1200 mm, overall depth in mm: 650mm, overall height in mm: 760 mm, seat height from floor in mm: 450 mm, waiting chair as approved by engineer in charge / employer. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . three seater, providing and placing reception table reception work surface top 25 mm thick in bwp grade plywood at 750 mm ht. side gable end 25 mm thick in bwp grade plywood. reception table modesty 25 mm thick in bwp grade plywood of 1100 mm ht, working table top have wire manager hole cut for passing the wires. ledge top ( white ) of 200 mm ( d ) and below the ledge top 200 mm ( d ) 25 mm thick in bwp grade plywood supported with studs. front white panel in 25 mm bwp grade plywood. led light to be placed behind front panel. all exposed edges sealed with 2 mm thick pvc edge banding tape. table shall have 2 plus 1 filling fixed drawer made of 18 mm bwp grade plywood. size of the drawer is 400x450x725 mm ( ht ) . drawers should be on the levellers. table should have metal cable tray duly powder coated below table top for electrical points ( without switch and socket plates ) . metal wire riser for carrying wires. .size 1800 ( w ) x 600 ( d ) x1100 ( ht ) mm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and supplying a mid back chair with ergonomic design, comfortable and aesthetically appealing. the seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg / m3 and the back shall be made of moulded plywood padded with high resilience polyurethane foam having density 32kg / m3. the seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 gsm. the backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. the chair shall be supplied with aluminium die cast with cushion arm having leatherite top completely joint with seat. for seating durability the chair shall have multi angle synchro tilt mechanism with 360 degree revolving and tilt tension adjustment which provides back strength for the chair., providing and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 48 kg / m3 in seat and having density 32 kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam density 32 kg / m3. the structure shall be upholstered with fabric tapestry and. the sofa shall be supported on wooden leg .there shall be shoe provided at the bottom to avoid scratches on the floor. two seater sofa: dimensions length 120 cm 180 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm.three seater sofa : dimensions length 180 cm 250 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) .two seater, providing and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 48 kg / m3 in seat and having density 32 kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam density 32 kg / m3. the structure shall be upholstered with fabric tapestry and. the sofa shall be supported on wooden leg .there shall be shoe provided at the bottom to avoid scratches on the floor. two seater sofa: dimensions length 120 cm 180 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm.three seater sofa: dimensions length 180 cm 250 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . three seater, providing and placing center table. table of size 900 ( d ) x 900 ( l ) x 450 ( ht ) .the table top shall be made out of solid seasoned wood, finished with semi matt polished of approved shade, design and colour. the table having same size of plain and clear glass in the table top. table having buffer for on the bottom for avoid the scratches on the floor. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., fowler bed delux ( abs panel ) fowler bed should be of following minimum dimension: 2030 mm l x 900 mm w x 600 mm h ( without mattress ) .*bed frame must be sturdy and stable to support weight of at least 135 kg. the frame structure should be made up of at least 16 g crc, rectangular pipe of 60mm x30mm / circular pipe of size 30mm*bed frame mounted on round / rectangular tube, fitted with 125 mm castors, 2 with breaks and having rustproof body.*all adjustments for fowler position must be obtained from crank shaft, manually operated with stainless steel foldable handle on both the shaft.* the finished bed must be rust proof, pre treated and treated with epoxy polyester antimicrobial powder coated to increase the bacteriostatic property as per tender document as an attachment, providing and placing bed side locker deluxe of overall sizes 400 ( w ) x 400 ( d ) x 800 ( h ) mm. crca sheet constructions. having one box and one drawer. s.s top with three sides raise edges. epoxy powder coated. drawer having recessed type of handle for opening of the drawer. mounted on the castors. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing revolving stool with ms tubular four leg construction with ms foot rest ring duly epoxy powder coated. top size 400 mm and 650 mm ht. top made up of ss finish. adjustable revolving top with height adjustment with ms screw mechanism. the stool having rubber stumps. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing examination table of size: 1800 ( l ) x 500 ( d ) x 750 ( ht ) mm. bed is made up of ms duly finished with epoxy powder coated. bed top is in two part, head rest is adjustable. under structure in ms tubular legs duly powder coated with rubber stumps. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing stretcher trolley as per photograph of size 2130 ( w ) x 560 ( d ) x 810 ( ht ) mm. m.s tubular construction with ms removable stretcher. mounted on 150mm dia. castors ( two with brakes and two nos of non brakes ) . epoxy powder coated.the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., supplying and placing of single bed for structure metal frame duly powder coated is used and plywood is used in bed seat as per the design. overall size 900x1980x800 / 500 ht. bed plinth height 420mm. inner frame 50 x 25mm with 25x 25 cross members at min. bed seat is made up of 12mm plywood with white laminate lipping on all edges. complete with all necessary hardware ( without matterss ) of approved make. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves. table size: 1200 ( w ) x 600 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1350 ( w ) x 750 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1400 ( w ) x 600 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1500 ( w ) x 750 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1700 ( w ) x 750 ( d ) x 750 ( h ) mm. side storage size: 1050 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing table with side storage .the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement .the storage is having 18mm thk. bwp grade plywood shelves.table size: 1950 ( w ) x 750 ( d ) x 750 ( h ) mm. side storage size: 900 ( w ) x 400 ( d ) x 750 ( h ) mm, providing and placing cabinet .the storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. all exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree c with hot melt glue on special machines. the under structure shall be made out of 18 mm thick bwp grade plywood. the storage is having openable shutter with locking arrangement. the storage is having 18mm thk. bwp grade plywood shelves. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . size: 1650 ( w ) x 450 ( d ) x 750 ( ht ) mm, providing and placing cabinet .the storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. all exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree c with hot melt glue on special machines. the under structure shall be made out of 18 mm thick bwp grade plywood. the storage is having openable shutter with locking arrangement. the storage is having 18mm thk. bwp grade plywood shelves. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . size: 1700 ( w ) x 450 ( d ) x 750 ( ht ) mm., providing and placing ergonomically designed, comfortable and aesthetically appealing high back chair. the seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam having density 48 kg / m3. the seat shall be upholstered with fabric tapestry 0.8mm thick and 300 gsm and the back shall be made of polypropylene net cover with breathable mesh tapestry. the backrest shall be made by keeping contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. the chair shall be supplied with pu adjustable arms. the chair shall have synchro tilt mechanism with 360 degree revolving with upright position locking. the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with bifma standard class 3 gas lift to suit them using the lever under the seat. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing table and mobile pedestal as per photograph. the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. pedestal are made of 18mm thick bwp grade plywood with 2 drawer plus 1filing .the drawer are made mobile with use of castors. the drawer units are provided with center locking arrangement. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . table size: 1200 ( w ) x 600 ( d ) x 750 ( ht ) mm., providing and placing table and mobile pedestal as per photograph. the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. pedestal are made of 18mm thick bwp grade plywood with 2 drawer plus 1filing .the drawer are made mobile with use of castors. the drawer units are provided with center locking arrangement. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . table size: 1400 ( w ) x 750 ( d ) x 750 ( ht ) mm., providing and placing table and mobile pedestal as per photograph. the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the gable end shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. the modesty panel of the table shall be 600mm height made of 18mm thick bwp grade plywood. pedestal are made of 18mm thick bwp grade plywood with 2 drawer plus 1filing .the drawer are made mobile with use of castors. the drawer units are provided with center locking arrangement. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . table size: 2400 ( w ) x 750 ( d ) x 750 ( ht ) mm., supplying and placing of executive table. size of the main table 2400 mm x 750 mm x 750 mm. side storage size: 1650 ( w ) x450 ( d ) x650 ( ht ) .work surface made of 50 mm thick bwp grade plywood. modesty panel made of 18 mm thick bwp grade plywood. under structure made of 50 mm thick bwp grade plywood. side unit shall belong to the same family and shall have overall dimensions of 1650 mm x 450 mmx 600 mm. the side storage top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. and under structure shall be made out of 18 mm thick bwp grade plywood of approved shade, design and colour. the storage is having openable shutter with locking arrangement. the storage is having 18mm thk. bwp grade plywood shelves. pedestal size 400 ( w ) x 450 ( d ) x 600 ( ht ) mm. pedestal are made of 18mm thick bwp grade plywood with 2 drawer plus 1filing.the drawer are use of castors. the drawer units are provided with center locking arrangement. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., supplying and placing a high back chair with ergonomic design, comfortable and aesthetically appealing. the seat shall be made of 15mm thick hot pressed commercial plywood padded with high resilience polyurethane foam having density 48kg / m3 and the back shall be made of moulded plywood padded with high resilience polyurethane foam having density 32kg / m3. the seat and back shall be upholstered with leatherite tapestry 0.7mm thick and 535 gsm. the backrest shall be made by keeping the natural curvature of the spine which helps to provide full back support as well as head support. the chair shall be supplied with aluminium die cast with cushion arm having leatherite top completely joint with seat. for seating durability of the chair shall have multi angle synchro tilt mechanism with 360 degree revolving mechanism and tilt tension adjustment which provides back strength for the chair., providing and placing a three seater sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 48kg / m3 in seat and having density 32kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam density 32kg / m3. the structure shall be upholstered with leatherite tapestry. the sofa shall be supported on wooden leg . there shall be shoe provided at the bottom to avoid scratches on the floor. three seater sofa : dimensions length 180 cm 250 cm, depth 90cm 100 cm, seat height 30cm 40cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing a single seater sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately. the frame shall be padded with high resilience polyurethane foam having density 48kg / m3 in seat and having density 32kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam density 32kg / m3.the structure shall be upholstered with leatherite tapestry. the sofa shall be supported on wooden leg. there shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa : dimensions length 75 cm 100cm, depth 90cm 100cm, seat height 30cm 40cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and fixing centre table size 1200 ( w ) x 600 ( d ) x 425 ( ht. ) mm. the table top shall be made out of wooden frame with glass top. under structure in wooden with polish.the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and fixing side table. size 600 ( w ) x 600 ( d ) x 425 ( ht. ) mm. the table top shall be made out of wooden frame with glass top. under structure in wooden with polish. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., supplying and placing of conference table of size: 2250 mm ( w ) x 1100 mm ( d ) x 750 ( ht ) . the table top shall be made out of 25 mm thick bwp grade plywood of approved shade, design and colour. all exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree c with hot melt glue on special machines. the under structure loop legs shall be made of crca pipe section of size 60x30mm of thickness 1.2mm. the leg shall be connected with beam of thickness 1.2 mm. all these legs and beams shall be fitted to each other by connectors and necessary hardwares. the legs shall be having adjustable leveller shoe. this leveller shoe shall be provided at bottom of leg which allow 10 20mm adjustment for floor unevenness. the all legs and beams shall be duly finished with powder coating in desired shade / colour. powder coating shall be 40 60microns thickness. the beam shall be made of crca pipe of thickness 1.2 mm. the metal flipper is fixed on worktop of size 400 x 120mm switch socket with metal cable tray below table top for electrical points with centre leg for carrying wires. no sharp edges all corners and edges. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing of cafe table . size: 1600 mm ( w ) x 650 ( d ) x 750 ( ht ) .the top shall be made out of 25 mm thick bwp grade plywood. the under structure shall be made out of ms chrome frame. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing in position chair . chair seat and back made up of hi quality polished ply. the chair shall be supplied with metal frame and the under structure shall be supported on four legs made up of round chromed 18 gauge steel tube frame . there shall be ppcp shoe provided at bottom to avoid scratches on the floor. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and supplying auditorium chair push back of standard size as per design. seat inner frame injection moulded ppcp inner seat frame with 4 fly nuts embedded cushion 45 plus density polyurethane foam cushion 100 percent polyester fr fabric. seat. fabric 100 percent polyester fr fabric. back inner frame 25mm x 5mm x 3mm ms flat made back inner frame with threading holes cushion 45 plus density polyurethane foam cushion seat. fabric 100 percent polyester fr fabric. quillting laminated with 5mm foam underlay with polyester lining underneath. back cover back side of the back covered with injection moulded ppcp cover. push back total weight 8.25 kg, providing and placing a personal locker in perfectly upright and straight position. the overall size of the personal locker is 380 ( w ) x 450 ( d ) x 1830 ( ht ) mm. the personal locker shall have 6 nos. of doors. it shall be ( like top, side, back, door, shelf etc. ) made of 0.8mm thickness high yield strength crca sheet of grade d confirming to is 513. the main frame and base shall be semi welded and folded constructions which have intrinsic rigidity and high load carrying capacity. uniformly distributed load capacity of each shelf shall be 40 kg. the door shall be operated with aesthetically appealing snap fit abs plastic handle and concealed crank hinge. adjustable leveller shall be provided with metal insert to resist scratches on the floor and also level and support structure. the structure shall be supplied duly powder coated with 40 50 microns with 7 tank pre treatment process. locker shall have individual locking arrangement. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., providing and placing class room chair ergonomically designed for user comfort and shall have aesthetically appealing design. the seat shall be made of 12 mm thick hot pressed plywood upholstered with high resilience polyurethane foam having density 48kg / m3 with fabric tapestry of 300 gsm and the back shall be made of polypropylene. the arm shall be provided ms chrome plated having dia. 25.4 mm with pp on top for comfort. the frame structure shall be four legged support type made up of chrome plate round pipe. there shall be ppcp shoe provided at the base to avoid scratches on the floor. seat width ( w ) 490mm, seat depth ( d ) 490 mm, seat height 450 mm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., supplying and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately.the frame shall be padded with high resilience polyurethane foam having density 48 kg / m3 in seat and having density 32 kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 32 kg / m3. the complete structure shall be fully upholstered with leatherite tapestry 0.7mm thick and 535 gsm. the under structure shall have ms leg. there shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa: dimensions length 75 cm 100 cm, depth 90 cm100 cm, seat height 30 cm 40 cm.three seater sofa: dimensions length 180 cm 250 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . single seater sofa, supplying and placing a sofa that shall be constructed from wood and commercial plywood having inner frame. the thickness of the wood should allow for the heavy tension webbing. the sofa shall have spring attached and also be padded separately.the frame shall be padded with high resilience polyurethane foam having density 48 kg / m3 in seat and having density 32 kg / m3 in back. there shall be cushion arm provided padded with high resilience polyurethane foam having density 32 kg / m3. the complete structure shall be fully upholstered with leatherite tapestry 0.7mm thick and 535 gsm. the under structure shall have ms leg. there shall be shoe provided at the bottom to avoid scratches on the floor. single seater sofa: dimensions length 75 cm 100 cm, depth 90 cm100 cm, seat height 30 cm 40 cm.three seater sofa: dimensions length 180 cm 250 cm, depth 90 cm 100 cm, seat height 30 cm 40 cm. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) . three seater sofa, providing and placing of single bed as per photograph without box made of best quality bwp grade plywood for structure and plywood is used in bed seat as per the design. overall size 900 x1800 mm. bed height 420 mm. inner frame 50 x 25 mm with 20 x 20 cross members at min. bed seat is made up of 12 mm plywood lipping on all edges. complete with all necessary hardware ( without matterss ) of approved make. the rate is inclusive of all taxes and other incidental charges etc., complete. ( excluding gst ) ., panel based partition of 60 mm thickness with framework made of aluminium alloy extrusions. all aluminium parts are duly finished with powder coating in desired shade / colour. powder coating shall be 40 60microns thickness and shall be pre treated for seven stage anti corrosion treatment followed by epoxy powder coating. middle member in aluminium alloy extrusion of size 60 x 30 mm having thickness of 1.2 mm duly epoxy polyester powder coated. bottom raceway / skirting in aluminium alloy extrusion of size 100mm ht. having thickness of 1.5 mm duly epoxy polyester powder coated. intermediate raceway ( optional ) wherever is required above / below worktop, in aluminium alloy extrusion of size 100 mm ht. linear workstation size: 1200 ( w ) x 600 ( d ) x 750 ( h ) mm with mobile drawer, panel based partition of 60 mm thickness with framework made of aluminium alloy extrusions. all aluminium parts are duly finished with powder coating in desired shade / colour. powder coating shall be 40 60microns thickness and shall be pre treated for seven stage anti corrosion treatment followed by epoxy powder coating. middle member in aluminium alloy extrusion of size 60 x 30 mm having thickness of 1.2 mm duly epoxy polyester powder coated. bottom raceway / skirting in aluminium alloy extrusion of size 100mm ht. having thickness of 1.5 mm duly epoxy polyester powder coated. intermediate raceway ( optional ) wherever is required above / below worktop, in aluminium alloy extrusion of size 100 mm ht. linear workstation size: 1400 ( w ) x 750 ( d ) x 750 ( h ) mm with side unit 900 x 450 x750 ( ht ) , providing and placing ergonomically designed, comfortable and aesthetically appealing mid back chair. the seat shall be made of 12mm thick hot pressed commercial plywood upholstered with high resilience polyurethane foam having density 48 kg / m3. the seat shall be upholstered with fabric tapestry 0.8mm thick and 300 gsm and the back shall be made of polypropylene net cover with breathable mesh tapestry. the backrest shall be made by keeping contoured lumbar support which helps to provide full back support and maintain the natural curvature of the spine. the chair shall be supplied with pu adjustable arms. the chair shall have synchro tilt mechanism with 360 degree revolving with upright position locking. the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 100mm with bifma standard class 3 gas lift to suit them using the lever under the seat....
39275934 bids are invited for office furniture office table , side table , 2 seater sofa , 1 seater sofa , centre table , teapoy total quantity : 8...
39215388 bids are invited for supply of furniture godrej make maindesk with pedestal as per ts at tadipatri cao , godrej make steel table with storage on both sides as per ts at tadipatri cao , godrej make steel table with storage on one side as per ts at tadipatri cao , godrej make revolving chair with head rest as per ts at tadipatri cao , godrej make revolving chair as per ts at tadipatri cao , godrej make visitor chair as per ts at tadipatri cao , godrej make sofa set 3 seater as per ts at tadipatri cao , godrej make maindesk with pedestal as per ts at nandhyal tlo , godrej make steel table with storage on both sides as per ts at nandhyal tlo , godrej make steel table with storage on one side as per ts at nandhyal tlo , godrej make revolving chair with head rest as per ts at nandhyal tlo , godrej make revolving chair as per ts at nandhyal tlo , godrej make visitor chair as per ts at nandhyal tlo , godrej make sofa set 3 seater as per ts at nandhyal tlo , godrej make revolving chair with head rest as per ts at nagar kurnool tlo , godrej make visitor chair as per ts at nagar kurnool tlo , godrej make sofa set 3 seater as per ts at nagar kurnool tlo total quantity : 68...
39163998 procurement of furniture for iggaarl pulivendula andhra pradesh package 1 , wooden table and bench for grinding soil, study table for quarters, teapoy, workstation table, file racks, conference hall u shaped table of 22 table elements, writing chairs, pedestal unit, chairs plastic, chairs executive with head rest, chairs executive, executive chair high back, visitor chairs / s type chairs, sofa set 2 seater, visitors lounge sofa, cushion chairs, executive table, tables with runner executive ( 4x2 ) ...
39061324 supply and installation of remote mounted smart positioner for burner and sofa tilt in u3 at ntpc nabinagar...
39033907 bids are invited for furniture for township and hop office for ntpc 1 table, coffee, godrej, alice 2 sofa, 3str, 1770x845x810mm, rio plus, godrej 3 sofa, 3 seater, godrej, pisa 4 sofa, 1 seater, godrej, pisa 5 table, lhs, godrej, jefferson 6 table, eru, godrej, jefferson, rhs 7 table, back unit, godrej, jefferson 8 chair, high back, std, versa neo, fu3401ax1 9 chair, visitor, std, versa neo, godrej 10 table, tower unit, godrej, jefferson 11 chair, mid back, versa neo, godrej 12 12str rect conf tbl, mingle unitized 13 sofa, 3 seater, godrej, aristocrat advance 14 sofa, 1 seater, godrej, aristocrat advance 15 desk cum bench, std, 1500mm, godrej total quantity : 107...
39016969 bids are invited for procurement of office furniture dinning chair , sofa set 2 seater velvet cloth finish , sofa set 3 seater velvet cloth finish , sofa set 2 seater leathrite finish , centre table with ms frame and 18mm marine ply top finished with 1.0mm mica , dinning table , decorative led lights , sign board , washroom shed size 20x15 , perling , wooden ceiling , supply of vetrified tiles size 4x2 , supply of planters , artistic painting total quantity : 2868...
38874364 auction sale of lot no: 02 lot name: old items old steel drums and sofa 3 seater...
38870290 supply of furniture and work stations for data recover center it department in arjitham building at triumala , supply and fixing of versaline vmt 1275 l type table, supply and fixing of executive chair getin hb equivalent, supply and fixing modular workstation with each cabin of two seater non sharing cluster, supply of high back revolving chair, supply and fixing of decorative curtains with embroidery design sheer cloth of best quality, supply and installation of conference table, supply of sofa three seater, supply of sofa single seater sofa...
38722703 supply, installation, testing, and commissioning of furniture for visitors hostel , supply of furniture for visitors hostel to iit tirupati (please enter the amount for only 1 piece of item in columns 7 & 8) , single bed , bed/sofa side table , tv table with storage , study table , low height storage with granite countertop , coffee table , center table , meeting table , dining table (2 seater) , dining table (4 seater) , dining table (10 seater) , dining table chairs , coffee table chair , single mattress , study/office chair , sofas ( three seaters) , sofas ( single seaters) , conference table (12+1 seaters) , workstations ( two – seater) , l shaped table...
38686873 bids are invited for supply of executive desk and chairs sofa revolving chair with head rest , back chairs , sofa 2 plus 3 seater , executive desk total quantity : 9...
38673124 tender for proposed interior furnishing works for indian bank jujjuru branch 1 partitions: providing and fixing partition in position as per design with 50mmx50mm solid wood finished section frame work @ 600mmc/c both ways screwed to the floor and ceiling with m.s.cleats and to be treated with anti termite oil. the measurement will be taken up to the false ceiling visible height in case of full height partition. the frame work will be claded with 9mm thick bwp grade plywood both sides and to be finished with 1.0mm laminate as per design with approved band adhesive. extra frame work to be fixed for fixing glass. in the glazed partition 12mm thick. modiguard/ saint gobain clear float glass with etching/sand blusting/ granular blasting to be provided duly fixed with white beach/white ceader lipping 50mmx 25mm all complete duly natural polished and melamine finish. in case of full ht partly glazed partition some portion to be raised as per drawing. the work should be completed as per specification, design & approval of the architect. for the door 32mm solid core bwp flush door with a frame work of white beach/white ceader size 75mm x 62.5mm with necessary hold fast fixed to the wall/partition. finished with 1.0mm laminate and lipping in all sides and 40mmx40mm white beach/white ceader wooden molulding to be provided along the periphery of the door frame. supplying and fixing door accessory as door closure, brass hinges, cylindrical/ night latch locks and s.s.handle etc. 1.1 main entrance full glass partition 72.25 sft providing and fixing in position partly glazed full height glazed partition work as shown in the drawings in frame work at 50x100mm thick beach wood frame, glass 12mm thick toughened glass work as shown in the drawings with melamine polish, item including all necessary accessories, all labour charges, all taxes, complete for the finished item of work. 1.2 partly glazed full ht partition at manager cabin 148.00 sft providing and fixing in position partly glazed full height partition work as shown in the drawings including door as shown in the drawings in frame work at 2’ x 2’ grid (horizontally and vertically) comprising of 2” x 2” saal wood section and / or as per frame work shown in the drawings with 9mm thick bwp plywood on both sides finished with 1mm thick laminates of approved shade and colours as shown in drawings. 1.3 solid full height partition at record room & cash counters with grill and doors 289.10 sft providing & fixing in position solid full height double skin partition in frame work including door in 2’ x 2’ grid (horizontally and vertically) comprising of 2” x 2” saal wood section with 9mm thick bwp grade make plywood on both sides finished with 1mm thick laminates of approved make and colour, item to include 2” x 2” sal wood member for door frame. all exposed beech wood surfaces to be finished in melamine polish of matching laminate colour as directed including all necessary stainless steel finish fittings/ hardware, door closers, godrej locks and wood preservative paint etc. as per list of approved material and as approved by the project consultant/ bank officer complete for finished item of work in all respects. 1.4 grill work at cash counter top 69.19 sft aluminium grill – providing & fixing of aluminium grills glazed at cash counter. made out of 2” x 2” hollow square frame section as directed. work includes antirust coat & two coats of first quality enamel paint. all necessary items, all taxes, labour charges, etc., complete for finished of work in all respects. 1.5 solid half ht partition including wicket gate at work stations 88.00 sft providing and fixing wicket gates 4 height with wooden frame work, necessary hardware, lock, hinges and fixing 19mm thick bwp plywood with 1mm thick laminate on both sides of frame. all exposed edges shall be fixed with 12mm thick steam beach wood beading finished with melamine spray polish. 1.6 12mm thk toughened glass 41.50 sft providing & fixing in position 12 mm thick toughened glass at cash counter & work station counters front side, including all necessary items, labour charges, all taxes etc., complete for the finished item of work in all respects. 1.7 cover for rolling shutter at bank 73.00 sft providing, fabricating and fixing cover for rolling shutter made of 2”x2” sal wood frame work spaced at 18” c/c both directions, fixing 19mm thick plywood and 1mm thick laminate (only outside) of approved shade with necessary locking arrangements. separate flap door should be made for rolling shutter to operate. the shutters should be provided with locking arrangement. 2.0 doors 2.1 manager door 42.00 sft providing, fabricating and fixing door frame in 2”x3” steam beach wood and fixing with frame of all round 5 x 2 steam beach wood frame of approved make. the door shall be glazed with 8 mm thick float glass fixed with beach wood beading of 12mm thick and having etching work (etching cost considered @ ` 40/sft). glazing portion of door shall be done in the same line / pattern as of the partition to which it is fixed. all open edges of door shall be leaped with beach wood beading and all wood to be finished with melamine polish. the door shall be fitted with door closer of approved make, 3 nos of heavy brass hinges, brush steel finish 6 lever mortise lock (set of three keys) and heavy door stopper, indian bank logo of approved bank and all other fittings and fixture etc. complete and as per design and approval of engineer in charge. 2.2 branch main entrance door 22.75 sft providing and fixing glass door for entry with 100mmx75mm beech frame wood work duly fixed with the partition/wall with hold fast duly polished. a white beach wood frame work size100mmx50mm as all round frame work with a decorative handle of 600mm of approved brand, floor spring locks, etc all complete. 100mmx50mm thick stiles to be fixed on the frame 3 sides. 12mm thick toughened etched glass and indian bank logo frosted design with necessary sand blasting/granular blasting to be provided and edge should be machine beveled polished. the work to be completed as per design and specification of the architect all complete. the wooden portion to be duly melamine polished. 3.0 tables: providing and fixing in position manger’s table of size 6’ 0” x 3 0”, officer’s table of size 5’ 0” x 2’ 6”, work station table 4 0 x 2 6 including built in storage (credenza) by using 25 mm thick bwp plywood for top and 19mm thick bwp plywood for all other horizontal and vertical members including telescopic cpu stand/ ready made keyboard tray shall be provided of approved model and make. footrest made with t.w. member of size 4” x 1 ½” “finished with french polish. all exposed plywood surfaces to be finished with 1mm thick greenlam make laminate of approved make & shade and all exposed edges of table top & ply verticals to have 1” x ¼” beech lipping. all exposed beech sections to be melamine and internal surfaces to have white enamel paint as directed. item to include plywood boxing, all necessary hardware and fittings in stainless steel finish, lipping to all edges etc. complete for the finished item of work in all respects. 3.1 branch manager (6 0x3 0) 1 no 3.2 w.s table ( 4 0x2 6) 4 no 3.3 server table (4 0x1 6) 1 no 4 side unit 1 nos providing and fixing side unit/back unit made out of 19mm thick bwp ply wood finished with 1.0mm laminate in all exposed areas. the drawers to be made out of 19mm thick make bwp plywood in the front cladded with 1.0mm laminate sides to be made out of 12mm thick bwp plywood and bottom made out of 6mm thick bwp plywood duly painted in matching tone and it should play on drawer sliding channels. the shutters to be made out of 19mm thick bwp plywood and should play on drawer sliding castors on powder coated channels. the necessary locks, handles, etc to be provided. 75mmx12mm wooden skirting to be provided duly polished as per matching tone all along the visible areas. inside of the unit to be enamel painted in matching tone. all the exposed edges of the boards/ plywoods to be covered with wooden lippings/ mouldings duly polished all complete. the work to be completed as per approval and specification of the architect 5.0 cash counter 1 no providing and fixing top, front & side of cash counter made out of 19mmthick bwp plywood as per design cladded with 1.0mm thk laminate on side and front & the edges to be finished with necessary white beach or white ceader lippings, mouldings, etc. special 150mm drawer to be made for the cash with dividers of 12mm thick bwp plywood the front of the drawer made out of 19mm thick bwp plywood finished with 1.0mm laminate, sides 12mm thick bwp plywood and bottom to be made of 6mm thick bwp plywood. the inside and sides of the drawer to be duly polished. the drawers and shutters to be provided with necessary drawer sliding channels, hinges, locks etc. a foot rest to be provided made out of 19mm thk bwp plywood duly polished. inside of the unit to be polished in the matching tone. all visible areas to be covered with white beach of white ceader lippings, mouldings with natural polish. wire manager, cpu trolley, keyboard tray, tea tray to be provided 75mmx12mm white beach white ceader skirting to be provided with natural polish in all visible areas and 18mm thick plain glass to be provided at counter 2nd top customer face. counter top at 1100 mm lvl. the work should be completed as per specification. size: 8 0 x 5 0 x 8 3 6 wall mounted writing ledge: 2 each providing and fixing writing ledge as per design made out 19mm plywood with necessary grove paterns 1.0mm thick laminate (color, vertical grain) to be cladded. small boxes to be made out of 19mm bwp plywoods to be made on top of the writing ledge finished with 1.0mm laminate, inside enamel painted. the work to be completed as per design and approval of the architect. 7 soft board/notice board 1 each providing and fixing soft board with necessary framework with 12mm bwp plywood on top jolly board to be fixed finished with fabric @rs 100, with necessary mouldings duly polished along the periphery. 8 false ceiling 781.00 sft armstrong or equivalent make false celing of trlock sihouette suspension system, providing and fixing in the true horizontal level false ceiling system of armstrong world industries. the suspension system shall be the armstrong. trulock sihouette revealed profile grid system with 15mm wide flanges incorporating 3mm or 6mm central recess colour black revealed silhouette main runners and cross tees to have mitered cruciform junctions. main runners to be spaced at 12mm c/c fixed by using 2mm pre straightened gi wire. main tee, rotary stitched of size 15mm x 38mm x 3000mm at every 1200mm c/c maximum and 600mm c/c cross tee of size 15mm x 38mm x 600mm at every 1200mm c/c maximum and 19mm x 19mm x 3000 wall angel all round the wall to form grid size of 600mm x 600mm and suspending the grid using 2mm prestraightened gi wire and 6mm nylon raw plug at every 1200mm intervals at the maintee laying of armstrong mineral fiber sandfinish (dunemax rh99) tiles manufactured by armstrong world industries of size 600mm x 600mm x 19mm over the formed grid completed as directed, making necessary framework for a.c. ducting, if any, and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level, including making grooves and trap doors for a.c. unit in 19mm thick bwp grade plywood with stainless steel hinges & locks with moulding 1” x 1” for edges including finishing with white plastic emulsion paint etc. complete in all respects. (note: only the plan area will be measured for payment. no extra payment will be made for cutouts, grooves, mouldings etc.) 9 storages providing and fixing in position back & half height storages using 19mm thick bwp grade plywood of shutters, vertical and bottom, back 6mm thick bwp grade plywood finished with 1mm thick laminates and all other sides shall be finished with white enamel paint as detailed therein. the storage units shall be provided with handles( stainless steel finish )as per approval of the project consultant / bank. all exposed plywood surfaces to be finished with 1mm thick laminate of approved make & shade and all exposed edges of plywood to have 1” x ¼” hard wood lipping. all exposed hard wood sections to be melamine in matching colour laminate and internal surfaces to have white enamel paint as directed. item to include all necessary hardware and fittings in stainless steel finish, godrej multipurpose locks including magnetic ball catcher etc. complete for the finished item of work. 9.1 back storage 15.00 sft 9.2 half height storage 42.00 sft 9.3 full height storage 64.00 sft 10 suggestion/ cheque drop box 2.00 each manufacturing, supplying and fixing of suggestion box made of 19mm plywood and 1.0 mm thick lamination on top as per bank’s specifications 11 running table top 5.00 rft providing & fixing of running table top 1 6 width using of 19mm thick bwp grade plywood finished with 1mm thick laminate, including all necessary items, labour charges, screws, taxes. the work to be completed as per specification and approval of the architect. total of interior furnishing works rs 1 false ceiling – banking hall 12mm thick gypsum board & 12mm thick mineral fiber tile* 1.white 2.india gypsum & armstrong, gyproc, usg ceiling or equivalent* 2 false ceilings cabins 12mm thick mineral fiber tile* 600mm x 600mm 1.white 2. armstrong, gyproc or equivalent 3 partitions frame work: made of 50 x 50mm hard wood like sal wood/hillock or equivalent plywood isi marked and as per is 710, bwp grade (gurjan core) 9mm thick 1. century club prime, 2. green ply gold, 3. archidply classic laminates: 1.0mm thick laminate* 1. fusion maple (wood finish)* 2.formica, 3. euro lam, 4. bravia, green lam, merino or equivalent* 4 counters/tables plywood isi marked and as per is 710, bwp grade (gurjan core), 19mm, 12mm, 9mm thickness archidply classic, century ply club prime, green ply gold or equivalent. laminates:1.5 mm thick for table top and other s 1.0mm thick laminate* 1. fusion maple (wood finish)* century, formica, euro lam, green lam, merino or equivalent* 5 column cladding laminate 1.0mm 1. fusion maple (wood finish)* with regular skirting* century, formica, euro lam, green lam, merino or equivalent* 6 wall painting acrylic emulsion 1.sugarcane asian paints, berger paints, ici, nerolac or equivalent 7 ceiling painting premium emulsion 1.white/ raindrops* asian paints, berger paints, ici, nerolac or equivalent* 8 pinup board for work station fabric 1.maroon velvet or equivalent 9 sofa sets fabric – back & sides 1.maroon visitor seating 1. ss perforated* seated with end arm 10 chairs fabric 1.maroon godrej, wipro, featherlite or equivalent* 11 painting exterior texture – classic or fine* 1.grey – white heritage, spectrum, alltek or equivalent exterior emulsion 1.grey/white asian paints, berger paints, ici, nerolac or equivalent* 12 painting for rolling shutter synthetic enamel paint 1.oxford blue asian paints, ici paints, nerolac or equivalent* 13 vertical blinds fabric* 1.mac, vista or equivalent* 14 doors and windows painting synthetic enamel paint 1.light brown ( sandstone colour) asian paints, berger paints, ici, nerolac etc or equivalent 15 door closer floor spring, door closer hardwin/ everite/ dorma/efficient gadgets. 16 handles for storage, doors brush steel finished of doorset, kitch, kircheff, hatrdwin 17 hinges for doors, storages brass 18 melamine for beading asian in matt finish 19 adhesives for partitions, tables asian trugrip 20 all screws for partitions, tables gkw/ nettle fold 21 patch fitting for doors ebco, godrej, hardwin 22 magnetic catcher for storages mukund 23 wooden beading for partitions, tables, storages steam beech wood. 24 all locks for tables, storages godrej, ebco, doorset for doors, storages....
38635595 supply fixing of furniture and work stations in the offices of 4th 5th floors in c far building, svims, tirupati , supply of executive table table made with 25 mm plb top 18 mm plb strip with look wise outer thickness 43 mm with plb body as per tender document as an attachment, supply and fixing of executive chair with neck support headrest fixed head rest made with pu moulded recsin upholstry as per tender document as an attachment, supply and fixing of executive table with side table of overall size main table 1820 mm ( l ) x 900 mm ( d ) x 750 mm ( h ) , with seperate side table 900 mm ( l ) x 750 mm ( d ) x 750 mm ( h ) as per tender document as an attachment, supply of table made with 25 mm plb top with 18 mm body with 2 mm edge binding and ms with powder coated frames size 1200 mm x 600 mm as per tender document as an attachment, supply of conference low back revolving chair made of nylon frame with nylon mesh upholstery with adjustable lumber support seat ply based pu moulded foam with fabric mesh covering with abs seat outer arms as per tender document as an attachment, supply and fixing of side by side 8 seater work station size 16 ( l ) x 4 ( w ) x 311 ( h ) with tolerance ( plus or minus 10 mm ) , work station 60 mm table top 25 mm thickness prelaminated particle board with 2 mm pvc edge beading on all side table top at 750 mm height from floor level with cable manager provision as per tender document as an attachment, supply and fixing of side by side 4 seater work station size 16 ( l ) x 2 ( d ) x 3 inch 11 ( h ) with tolerance ( plus or minus 10 mm ) , work station 60 mm, table top 25 mm thickness prelaminated particle board with 2 mm pvc edge beading on all side table top at 750 mm height from floor level with cable manager provision as per tender document as an attachment, supply and fixing of side by side 2 seater work station, size 8 ( l ) x 2 ( d ) x 3 feet 11 inch ( h ) , with tolerance ( plus or minus 10 mm ) , work station 60 mm, table top 25 mm thickness. prelaminated particle board with 2 mm pvc edge beading on all side table top at 750 mm height from floor level, with cable manager provision as per tender document as an attachment, supply of visitor chair back made of nylon frame with fabric small cushion with fabric uphosty. seat ply based pu moulded foam and fabric mesh covering. arms fixed arms connect to seat and back. as per tender document as an attachment, supply of mingle unitized 14 seater conferance table with the following specification ( product outer to outer ) width 415 cm, depth 145 cm, height 73 cm with a tolerance of plus or minus 10 mm. as per tender document as an attachment, supply of kareena nxt mid back conference chair with the following specifications ( product outer to outer ) width 70 cm, depth 70 cm, height 95 to 105 cm with a tollerance of plus or minus 10 mm as per tender document as an attachment, providing teak wood diwan cot with following features. size of the diwan size shall be such that it should suitable for providing mattress of size 30 x 72 inch and cot height should not be more than 1feet 6 inch including with 6 inch mattresses from floor level. supports best country wood size of 2 x 2 size with 4 horizontal supports. as per tender document as an attachment, supply of foam mattresses of single block pu foam of standard make and design for diwan which offers superior resilience and bounce with ild number density is 28 kg cum, covered with a premium fabric quilted with soft flexi pu foam on both sides. the size of the mattresses is 30 x 72 x 5 inches thick, as per tender document as an attachment, supply of pillow of size 27 x 17 inches of standard make and design filled with hollow conjugate siliconized polyester fiber for durability and softness. high quality polyester fiber fabric covering with dual stitching sides for better aesthetics. as per tender document as an attachment, supply of bed side table of size 18 x 15 inches and height 15 inches having one drawer and bottom open section. the drawers are equipped with telescopic metal channels fitted with bushes for smooth noiseless operations and with handle sizes with 18 mm thickness of body and 9 mm thick for draw as per tender document as an attachment, supply of 3 seater sofa 3 seater made with seat and back metal insert with 25 mm od with 1.6 mm thickness frame with 45 dencity pu moulded foam with fabric upholstery seat foam thickness 4inches and back foam thickness 3.5 inches and side foam thickness 3inches fitting connecting pipe 50 mm od with 1.6 mm thickness with complete knock down system. as per tender document as an attachment, supply of full height dresser table of min sizes ( 23 x 71 inches ) with clear 5 mm thick mirror ( saint gobion make ) of size and with required designs and supports materials particle board processed engineering boards, minimum 18 mm thick with thorough intense antipest treatment for protection against termites, borers and pests. finishing laminating sheet covering with minimum 1 mm thick with machine edge binding as per tender document as an attachment, supply and fixing of 3 door wardrobe of minimum size 53 x 21 x 78 inches of minimum with openable shutters, mirror fixed over one shutter and two drawers and other shelves as per requirement of the department with required lock keys of godrej make and ss handles.structure should be covered with boards which should not be less than 18 mm thick for front and sides and for internal and rear sides with 12 mm thick. as per tender document as an attachment, supply of two door wardrobe of minimum sizes 36 ( w ) x 18 ( d ) x 75 ( h ) inches with openable shutters mirror fixed over one shutter and two drawers and other shelves as per requirements of the department with required lock keys of godrej make and ss handles. structure should be covered with boards which should not be less than 18 mm thick for front and sides and for internal and rear sides with 12 mm thick. as per tender document as an attachment...
38635245 bids are invited for customized furniture mse laminated bent ply wall hanging headboard. size 2400mm l x 1200mm h x 150mm d , bed base. size 2030mm l x 1560mm w x 364mm h , bed side table. size 415mm w x 400mm d x 450mm h , queen size mattresses. size 1981mm l x 1524mm w x 152mm t , laminated bent ply wall hanging headboard. size 3110mm l x 1200mm h x 150mm d , bed base. size 2030mm l x 1800mm w x 364mm h , king size mattresses. size 1981mm l x 1828mm w x 152mm t , study table with pantry unit and shoe rack. size 2070mm l x 580mm d x 750mm h , wall mounted mirror. size 1980mm h x 600mm w x 36mm t , solid wood balcony chair with arms. size 585mm w x 900mm h x 700mm d x 450mm seating height , wall mounted tv ledge. size 1200mm l x 200mm w x 175mm h , round bent ply coffee table. size 464mm dia x 450mm h , bent ply study chair without arms. size 480mm w x 830mm h x 550mm d x 460mm seating height , bent ply room single seater sofa chair. size 660mm w x 840mm h x 812mm d x 415mm seating height design manufacture supply and installation of factory made total quantity : 2800...
38625590 bids are invited for kitchen machinery, equipment and furniture duel desk, principal & vice principal table, office tables, teachers table, 12 seaters meeting table, library table, computer table, library open book shelf, glass door storage almyrah, metal almyrah, 3 seater sofa, steel bedsincluding sick room, bedding hard foam, metal table with integrated storage, dining table with attached stools ( 8 seater ss top fixed, canteen table 2400 x 750, lab stools, executive chair, visitors chairs, chair without arm, personal locker unit, magnetic white board, green writing melamine surface non magnetic chalk board ,,ss stock pot range (24x24 x6), ss 2 burner india cooking rnge (44x24 x34), ss single sink unit (24x24x 34 +6) ss tiltting type bulk cooker (200 ltrs), ss tiltting type boiling pan (200 ltrs) ss spice trolly (18x24 x34), ss work table with 1 bs (44x24 x34) chapati hot plate (52x26 x34), semi automatic chapati making machine (82x77 x50), conveyor type toster power: 1.5 kw, 220 v (std), ss 4 door vertical chiller (48x28 x78), deep freezer 500 ltrs ltrs, deep freezer 300 dry masala grinder 5kg, pulveriser 2 hp, dough kneeder power:2 hp, 220 v, 20 ltrs capacity, wet masala grinder, ss 6 vessel hot bain marie with 1/1 gn pan with front tray, rail (84 x 26+12 x 34) ss platform trolly (34x24x34), ss kitchen utility trolly (34x24x34), ss pot rack 4 shelf (60x30x66), ss storage rack 4 shelf (44x16x66), pvc pallet (48x40x8), potato piller 20 kg, kitchen ventilation system, ss hood with ss filter 304 grade (54x30x24), ss hood with ss filter 304 grade (36x30x24) ( q3 ) total quantity : 1...
38587018 bids are invited for procurement of naval store items cable tie 10inch , cello bucket plastic 20 litres capacity , cello bucket plastic 15 litres capacity , brush steel wire , brush scrubbing large , oswals boric powder , araldite adhesive 180 gms , hit anti cockroach gel , 9v battery eveready , funnel , emery cloth abrasive 11x9 inch 36 grit , gala dust pans , dry chemical powder , detergent solution aerial , cloth hessian medium , cloth flannel 4 2 , cloth emery bs 871 , cloth bunting red 42 inch width , rope polypropylene 12mm , rope polypropylene 10mm , fevicol , lip seal for fire hydrant , lint free banyan cloth , ink bird heat resistant gloves for galley , ingco hot melt gun glue kit , hacksaw blade 12 inch , wild maker gloves leather a , wind socks safety zone , winsor white spirit , water proof paint asian weather proof , twine sewing medium flex , twine sewing , teflon thread seal tape roll 12mtr johnson , rope polypropylene 16mm , soap hard yellow 1kg chhokra , dowsil silicon sealant compound 300 mml tube , poly gunny bag 30kgs , asian paints tray paint roller , freemans tape measuring 15 meter , ubon e 50 goggle transparent , chain silver for boatswain , wild craft face mask , fluorescent tape yellow 4 inch , gala wiper sofa rubber total quantity : 1632...
38534617 supply of the following items in connection with xxi convocation 1. 18’x18’ pipe pendal 2. 18’x36’ shamiyana 3. 12’x24’ shamiyana 4. 9’x18’ shamiyana 5. 54’x54’ round tent 6. 36’x36’round tent 7. 6’x18’ side wall 8. 12’x18’ screen 9. green carpet 10. red carpet 11. flower mat 12. 3 seater sofa with cover 13. single sofas with cover 14. cushion chair with cover 15. pvc chair 16. steel table 17. air coolers 18. stand 19. round table 20. wash basin 21. up & down transport charges 22. labour charges ...
38532290 bids are invited for furniture 1 two seater computer table 2 class room chairs 3 lab chairs 4 hostel cots 5 sofa for waiting hall 6 vip 3 seater sofa 7 vip dining table with chairs 8 queen size bed 9 mattress for queen size bed 10 work table ( customised ) 11 podium 12 students dining table with chairs 13 students study table with chair 14 drawing table 15 class room teacher chairs 16 drawing hall stools total quantity : 650...
38458059 providing curtains interior works to siva sadan at satyagiri hills , providing cuirtain cloth ( balaji decors pristine, gsm 255 ) 6 mts stitching charges ( iiack model stitching, pvc steel ring and tape ) fixing charges ( each rod ) , curtain rods ( ss roda 80 inch, s.s phenites and clamp ) , sofa covers in suit rooms, door mats cloth...
38336587 arrangements of pendals, shamiyana, chairs, carpets and other items on hire basis for eid al adha ( bakrid ) festival on 29.06.2023 at gandhi municipal corporation high school in 37th division in circle i area 9583.00 pendals 576.00 shamiyana 25583.00 green & red carpets 400.00 handless chairs 7.00 steel tables 8.00 jumbo coolers 25.00 water drums 2.00 iron steps sets 3.00 sofa with cloth 576.00 blue curtains 4440.00 side walls 2.00 mike system including boxes mouth pieces, cordless mikes mike stand etc., 1.00 trow and frow charges including errection at removing the materials etc., as directed by the departmental authorites...
38336573 arrangements of pendals, shamiyana, chairs, carpets and other items on hire basis for bakrid festival at shadikhana in 39th division in circle i area on 29.06.2023 8748.00 pendals 648.00 shamiyana 8748.00 green & red carpets 100.00 handless chairs 10.00 steel tables 5.00 jumbo coolers 5.00 mini coolers 20.00 water drums 1.00 iron steps sets 3.00 sofa with cloth 2160.00 side walls 15.00 step tables 2.00 mike system including boxes mouth pieces, cordless mikes mike stand etc., 1.00 trow and frow charges including errection at removing the materials etc., as directed by the departmental authorites...
38214252 supply, installation, testing, and commissioning of furniture supply, installation, testing, and commissioning of furniture , supply of furniture to iit tirupati (please enter the amount for only 1 piece of item in columns 7 & 8) , sofa set ( crescent ottoman with back support) size: 900w x 400 d x 450 h mm. , sofa set ( crescent ottoman) size: 900 w x 400 d x 750 h mm. , sofa set ( crescent sofa seating) size: 4300 w x 2770 d. seat height 450 mm. , sofa set ( small ottomans) size: 450 d x 450 l x 450 h mm. , sofa set ( single – seater sofa) dimensions: 820 w x 820 d x 850 h mm. , sofa set ( two seater sofa) dimensions: 1440 w x 820 d x 850 h mm. , sofa set ( oval shape sofa) size: 2800 w x 1400 d mm , square table , chair without back support , chair with back rest...
38176530 bids are invited for furnishing items for inspection quarter at pudimadaka single bed cot , dressing table , 5 seater sofa , dining table with 6 chairs , teapoy , plastic moulded chair , curtain rod , curtain rod holder , door curtain , window curtain , drinking water glass , pressure cooker , fry pan , kadai , single bed mattress , pillow , bed sheet single bed , blanket single bed , cutlery set , dinner set , cup and saucer set , bathing towel , floor mat , plastic bucket , bathroom mug , dustbin , wiper , broom stick , squeegee total quantity : 168...
38093247 bids are invited for godrej interior tv unit , godrej interior display unit , godrej interior 2 door wardrobe , godrej interior encardo sofa , godrej interior timberland coffee table , godrej interior modular kitchen with steel shutters total quantity : 8...
38039657 supply commissioning & installation of battery operated motor trolley for broad gauge track inspection with following technical specifications1. pay load capacity: ( 1 ) ton ( 2 ) wheels: mild steel wheels with 320 mm dia ( 3 ) transmission: through automatic gear box ( 4 ) battery : 48 volt lithium battery, minimum 80 ah ( indigenous ) . ( 5 ) drive: bldc electric motor minimum 1800 watt with controller and converter. ( 6 ) charger :25 ampheres ( indigenous ) ( 7 ) brakes: drum brake system ( 8 ) base frame: stainless steel tubes ( 9 ) axle: 38 mm diameter, ms & ss made ( 10 ) bearings: bearings made from reputed isi manufacturers like skf & nrb ( 11 ) seating arrangement: comfortable 3 chairs made with stainless steel shall be arranged in front row & 3 seater sofa in second row additional seating for 3 persons shall be arranged at the back. ( 12 ) canopy: ss pipe 25 x25mm & canvas roof cover ( 13 ) running range with fully charged batteries 80km to 100 km ( 14 ) speed: maximum speed 30 kmph [ warranty period: 30 months after the date of delivery ] ...
38004472 bids are invited for renovation of ood duty room refurbishment of ceiling with 12 mm gypsum board and fixed on 2 mm thick gi channel at ood day cabin and night cabin. , wooden panelling with 18 mm wpc board and 1 mm mica of approved colour , officer executive table with 3 drawer pedestal , modular work station with three drawer pedestal and keyboard tray made with 18 mm waterproof ply and 1.0 mm laminate , refurbishment of wall with 2 coat of putty 1 coat of primer and 2 coat of emulsion of approved colour , digital display unit 49 with tata sky connection , floor mounted cupboard , concelling or rearranging of electrical power cables and sockets as per requirement , led light 18 watt and 6 watt , heigh back executive chair , sofa 3 seater leathrite finish , visitor chair , roller blind for windows , wall mounted cupboards made with 18 mm pre laminated particle board , refurbishment of washroom with mosquito net, shower curtain, gyser shower, towel rod and new commode total quantity : 7633...
37992508 supplying of furniture for meeting hall at srivari sevasadan block 2 , tirumala , godrej pch 700 3d visitor chair, godrej jinerio three seater sofa, godrej alice pro coffee table, godrej victoria coffee table...
37941177 repairs to all type chairs, chair revolving high back, chair revolving mid back, chair computer, visitor chairs, class room chairs and sofa sets including dusting and cleaning of chairs at das complex andnaval dockyard visakhapatnam under ge ( i ) ( dm ) visakhapatnam...
37916616 bids are invited for outdoor sofa and garden furniture outdoor sofas , outdoor pation garden furniture total quantity : 5...
37825586 supply of furniture to the newly renovated chamber of joint director ( fac ) , state audit, ttd at tirupati , executive table, executive chair, supply of visitor chair riyam visitor chair : back: made of nylon frame with fabric small cushion with fabric uphosty., supply of model : platin table as per picture enclosed, top is made of 16mm plb top covered with all sides aluminium profiles, 5 seater sofa...
37811973 maintenance/ repairs to wooden furniture and repair/modification of charpoy gi pipe with nylone newer to charpoy gi pipe with ply wood top with connected items and sofa works at naval station bheemunipatnam under ge(p) navy kalinga...
37789311 hire charges for supply and erection of various sizes shamiyanas ( tip top ) during the financial year 2023 2024 , hire charges including goods and services tax for supplying laying or erection and removal round flat roofed shamiyanas of any standard size as per directions of engineer in charge with bamboo posts or casurina posts with necessary frame work. the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the shamiyanas should be without any patches and preferably new or neatly washed and should be repaired and replaced without any extra rate if the cloth is spoiled due the rain by any other means. the contractor should be supplying the materials whenever necessary., hire charges including goods and services tax for erection and removal of sloped flat roofed 100per water proof shamiyana of any standard size as per directions of engineer in charge with ms pipes casurina posts with necessary framework . the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the shamiyana should be without any patches and preferably new or neatly washed and should be repaired and replaced without any extra rate if the cloth is spoiled due the rain by any other means. the contractor should be supplying the materials whenever necessary, hire charges for erection and removal of flat roof or sloped roof 100per water proof pendals covering with thick plastic tarpaulin with casuarina ms pipes frame work, white colour ceiling cloth with frills for decorating the pendal and plain border around, complete as per directions of engineer in charge..the rate includes watch and ward against theft and fire accidents, to and fro transportation charges and all labour chages etc, complete and should be in a good condition throughout should be removed after the same is over.if the cloth is spoiled due to rain the contractor should allow the electric and flowers decoration over the cloth done departmentally without any claim including maintenance., hire charges for erection and removal of flat roof or sloped roof non water proof pendals with casuarina ms pipes frame work, white colour ceiling cloth with frills for decorating the pendal and plain border around, complete as per directions of engineer in charge..the rate includes watch and ward against theft and fire accidents, to and fro transportation charges and all labour chages etc, complete and should be in a good condition throughout should be removed after the same is over.if the cloth is spoiled due to rain the contractor should allow the electric and flowers decoration over the cloth done departmentally without any claim including maintenance., hire charges for erection and removal of flat roof 100per water proof sheds with ms trusses, i sections channels etc., with necessary frame work with intermediate posts. the roof covering with gi sheets and duly providing white multi colour ceiling cloth for decorating the shed with necessary frame work with .decorative frills jallars around and border and whereever necessary etc., complete and duly covering the shed with water proof curtains on one sides of the shed as directed during execution from competent authority watch and ward against theft and fire accidents, to and fro transportation charges and all labour, incidental charges etc., complete the ceiling cloth should be white multi in colour and should be in a good condition throughout should be removed after the same is over the contractor should allow the electric and flowers decoration over the cloth done departmentally without any claim including maintenance., hire charges including goods and services tax for supply, erection and removal of ms pipes skeleton for support for flower decoration work in temple area. the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary., hire charges including goods and services tax for supply and removal of side walls of any size and any height as directed by engineer in charge. the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the side walls should be without any patches and preferably new or neatly washed and should be repaired and replaced without any extra rate if the cloth is spoiled due the rain by any other means. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply of fiber chairs. the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply of steel tables . the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges for supplying, laying and removal of canvas tarpaulin. the rate includes watch and ward against theft and fire accidents to and fro transportation charges and all labour, incidental charges etc., complete. the tarpaulin should be in a good condition throughout should be removed after the same is over., dismantling of rigid pavement flexible pavement hard rock of depth 300 to 450 mm by making holes using prematic compressor for drilling of 4 nos of 25 mm dia to a depth of 300 to 450 mm including removal of cc bt surface by dismanttling drilled surface using hammers including all labour charges etc., completeand fire accidents and transportation charges and all labour incidental charges etc complete the side walls should be without any patches and preferably new or neatly washed and should be repaired and replaced without any extra rate if the cloth is spoiled due the rain by any other means the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supplying, laying and removing of green red or any required colour mats of any width, as per requirement. the mats should be without any patches stains and should be preferably new and should be replaced if spoiled due to rain or any other means. the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply laying and removal of decorative ms frames with white cloth incuding filts, jalars, designs. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply laying and removal of full cushioned white vvip single seater sofa including cover. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply laying and removal of full cushioned white vvip 3 seater sofa including cover. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply laying and removal of stainless steel vip 3 seater sofa including cover with stainless steel hand rest. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supplying, fixing and removing of hand wash basin with 3 taps. the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary., hire charges including goods and services tax for supplying, fixing and removing of g.i. profile sheet in vertical or horizontal direction the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supplying, laying and removing of providing white blue coloured cloth curtain including supporting structure. the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the cloth cuttain should be without any patches and preferably new or neatly washed and should be repaired and replaced without any extra rate if the cloth is spoiled due the rain by any other means. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply and removal of jwala kundulu . the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply erection and removal of stage steps of any size and any height for dias. the steps should have handrail on both sides . the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply laying and removing of decorative full table cloth cover for tables of 6 feet length including top and all sides. the cloth cuttain should be without any patches and preferably new or neatly washed and should be repaired and replaced without any extra rate if the cloth is spoiled due the rain by any other means. the rate includes watch and ward against theft and any othe1r means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supplying, fixing and removing of mic podium. the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary., hire charges including goods and services tax for supplying, and removing of glass top teapoy the rate includes watch and ward against theft and fire accidents and transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary shamiyanas with bamboo posts or casurina posts with necessary frame work the rate includes watch and ward against theft and fire accidents and transportation charges and all labour incidental charges etc complete the shamiyanas should be without any patches and preferably new or neatly washed and should be repaired and replaced without any extra rate if the cloth is spoiled due the rain by any other means the contractor should be supplying the materials whenever, hire charges including goods and services tax for supply laying and removal of plastic tarpaulin. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply laying and removal of stainless steel vip chair including cover with ss hand rest. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply and removal of stainless steel drums of 80 lit capacity. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply, and removal of pvc drums. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply of providing red or any other coloured carpets 18 0 9 0 as per requirement as per directions of engineer in charge. . the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary, hire charges including goods and services tax for supply, erection and removal of stage benches of required size and required height. for dias at any location. the stage benches should be storng, firm and should be without any gaps or weak surface and should be safe for performing cultural activities, as per directions of engineer in charge. the rate includes watch and ward against theft and any other means, transportation charges and all labour, incidental charges etc., complete. the contractor should be supplying the materials whenever necessary...
37731957 supply of furniture to the special officer, sbio, svims for use in block no.1, birrd doctors quarters, tirupati , supply of model no cot king size 78 inches l x 72 inches w cot made with head rest and foot rest 18mm ply wood with 6mm mdf side panels 18 inches ply wood with deco spray polish, head board size: 42 inches h x 74 inches l and foot board size 74 inches l x 18 inches ( h ) , with 12mm commercial plywood with necessary hardware like bolts to fit the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of mattress of overall size 78 inches x 72 inches x 6 inches with the following dimensions top pu foam layer 23d coir 90 density middle foam 32 mm density, bottom side 90 density both sides combinations of coir and higher density foam a mattress that support your lumbar spine l2 l3 l4 and l5 comes with antisagging technology for durability. reversible medium firm on one side and high firm one other side. the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of polyester fiber filled pillow of size 27 inches x 17inches with medium soft pillow with micro fiber filling retains bounce for long time and gives cozy comfort to your neck micro pitch quilting for a rich look the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of dining table size 60 inches l x 36inches w x 30inches h plus or minus 10mm with standard designs with metal legs 80mm x 80mm one side curved shape and 6 nos chairs.materials: made with metal legs with wooden powder coating finish with glass top.the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of model iken ws 5 3 plus 1 plus 1 seater sofa made with seat and back with 45 density pu moulded foam with fabric upholstery, seat foam thickness 4inches and back foam thickness 3.5 inches and side foam thickness 3inches fitting. made with plywood isi 3 seater b17overall size w 1800 mm x d 740 mm x h 780 mm and 1 seater size w 700 mm x d 740 mm x h 780 mm. covered with upholstery totally with fabric of special type good quality and minimum gsm ( grams per square meter ) should not less than 280 or artificial leather rexine as per approved by the dept the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of wardrobe made with water fire proof prelaminated 18 mm thick iso particle board with dimensions as height 6 feet width 3 feet depth 1.5 feet two door two shelfs with one half locker shelf with lock on both main door and locker door with ss steel handles the rate including all taxes and other incidental charges etc complete excluding gst, supply of model platin table as per picture enclosed, top is made of 16mm plb top covered with all sides aluminium profiles, with aluminium legs with anudised finish with bushes size 900mm l x 500 mm w x450mm h mm, with tolerance plus or minus 10mm as per picture enclosed the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of chappal stand overall size 3 feet x 3 feet 12 mm plywood with wood polish the rate is inclusive of all taxes and other incidental charges etc complete excluding gst...
37641587 sealed quotation of market rates called for estimate purpose of supply, installation and commissioning of narrative immersive digital museum at newly constructedpremises of dr ambedkar memorial at swaraj maidan, pwd grounds, vijayawada, a.p , dlp laser phosphor projector min 15000 lumens or brighter, dlp laser phosphor projector with laser light source having 20000 hrs life or more min of 6500 l, dlp laser phosphor projector with complete dust protection min 3800 lumens or brighter, sitc of direct view led wall of pixel pitch, sitc of controller for led video wall having 2 inputs and 4 outputs, sitc of 85inch uhd large format display resolution 3840 x 2160, sitc of 55 inch uhd display monitor resolution 3840 x 2160, supply installation testing and commissioning of table top interactive display size: 55inch, supply installation testing and commissioning of table top interactive display size: 55inch, supply installation testing and commissioning of mini pc / workstation for 55inch, supply installation and fabrication of table top adjustable pull out mount for 55 led panels, supply installation testing and commissioning of holo box with following specifications, supply installation testing and commissioning of 24 giga port network switch, supply installation testing and commissioning of 12 giga port network switch, supply installation testing and commissioning of rack mountable workstation, supply installation testing and commissioning of multi output server, supply installation testing and commissioning of license software for calibration, supply installation testing and commissioning of show control software controlling, supplying and fixing of display port to hdmi converter / 6 ft cable i / c connection, supplying and fixing of hdmi to dvi patch cords of 6ft i / c connection, supplying and laying of high speed hdmi patch cords of 15ft resolution support, supply installation testing and commissioning of 24 port jack panel for control cable i / c, supply and fixing of 2m patch cord of 4 pairs cable for jack panels i / c connection, supply installation testing and commissioning of rj45 connectors i / c connection, supply installation testing and commissioning of audio interface with 24 bit / 96 khz, supply installation testing and commissioning of 8 channel amplifiers 2u, supply of 4 two way ceiling speaker with at least 0.75 hf driver. the speaker, supply of flush mount wall / ceiling 2 way speaker consisting of two 4inch, supplying installation testing and commissioning of led wash 20w, supplying installation testing commissioning of led linear wash 20w, supplying installation testing and commissioning of profile spot light source 40w, supplying installation testing and commissioning of fresnal spot light source, wattage 20 25w standard length 1 1.5ft, wattage 60w optical system, wattage 12 20w, standard length 1000mm, optical system 60, supply installation testing and commissioning led driver for led strip up to 5m, artnet to dmx converter 16channel , supports rdm and dmx512 ip20, artnet to dmx converter 2channel supports rdm and dmx512 ip20, stand alone dmx recorder with the following specifications covered network protocols, signal amplifier and splitter 8channel supports rdm and dmx512 ip20, supply installation testing and commissioning of led liner strip light with power supply, sitc of internal general lighting for entire museum with 2x2 led light fixtures, supply installation testing and commissioning of 19inch equipment rack of 42u, earthling with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, supply installation testing and commissioning of trilingual audio guide solution, supply installation testing and commissioning of wi fi setup, supply installation testing and commissioning 80 kva ups, true on line ups 3 ph double conversion, show programming proposed make system integrator, interactive programmingproposed make system integrator, lighting programmingproposed make system integrator, supply and fabrication of in lit panel of minimum size 600x600 along, supply and fabrication of in lit panel of minimum size 1000x1000, highly realistic scaled and proportioned set as per brief site conditions, sankalp bhoomi setproposed make customised, marriage with ramabaiproposed make customised, arrival in columbiaproposed make customised, columbia library setproposed make customised, law at lseproposed make customised, mahad satyagrahaproposed make customised, kalaram templeproposed make customised, transitional setproposed make customised, the educationalistproposed make customised, laser cut fabric panels as per approved artwork installed and complete, providing and making of metal casting structure for music bowls often called singing bowls, supply of compact 2 way speaker with following parameters low frequency transducer 8 inch, providing and fixing bench 500mm height, supply installation testing and commissioning of table mount interactive, supply installation testing and commissioning of 55inch led panels mounts, supply installation testing and commissioning of mini pc / workstation for 55inch, supply installation and fabrication of table top adjustable pull out mount for 55 led panels, library reading table table top table top to made up of 25mm thick prelaminated, a four sided seating arrangement for a library reading chair suitable for a table, library book rack, sitc of 85 inch uhd large format display resolution 3840x2160, dlp3 chip laser phosphor projector min. 13000 lumens or brighter laser light, supply and fabrication of whiteboard for projection and dry erase in the classroom, supply and fabrication of smart podium made with wooden / metallic sheets along with, class room table of size 1200lx450d*750ht ( desk only ) , sitc of headworn microphpne to be used with transmiiter polar pattern, site of two bay charging base batteries are charged within the transmitters, sitc of 8 button network wall mount control panel nos of buttons, sitc of touchpad with table mount with charging stand, sitc of ip to rs 232 command converter for control system conversion ip, sitc of ip to relay / sensor signal converter for control system conversion, sitc of 16 port poe network switchproposed make dlink / netgear / allied, 18u rackproposed make mts / valrack / netrack, sitc of cat6 a shielded, power cable audio video cables and connectors as required, supply of plastic injection moulded seat back stackable with armrests, aysia 3 seater sofa. the seat , armrest backrest assembly, supply installation testing and commissioning of rack mountable, producing and setup of audio visual content as per approved script, substrate preparation the exisiting wall shall be structurally sound, application of waterproofing system an acrylic polymer modified cementitious, installation of delta drainage system the drainage sheet, installation of the urbanscape green rolls on top of the drainage layer, installation of irrigation system an irrigation system comprising of drip, installation of the grass mat the lightweight grass turf, maintenance of the green wall the green wall, inclined green turf wall system, design supply and installation of suspended spider glazing system...
37627585 bids are invited for procurement of office contingency items temperature and humidity control device , audio and video display unit 43 , 2.1 channel sound bar 300w , industrial water purifier capacity 100 ltr , customised 05 seater sofa set leather , customised centre table , customised conference table , customised high back conference hall chairs , customised gi powder coated customised file cabinet , custom made workstation and chair , wet and dry vaccum cleaners industrial , spiral binding machine , lamination machine a3 , data display and training moniter 55 inch , overhead short throw projector , digital photo capturing device with lenses and accessories , paper shredding machine , industrial electronic weighing machine , microwave oven 28l total quantity : 57...
37568152 auction sale of lot no: 02 lot name: old items old steel drums and sofa 3 seater...