Panchayat Raj Engineering Department - Andhra Pradesh

34080396 consisting of 10 works in rajam, regidi amadalavalasa, santhakaviti and vangara mandals of srikakulam district. rehabilitation of bt road from v.p. road to soperu of rajam mandal 2 road portion 3 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 4 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 5 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 6 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specificationclause 1904.2 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete 7 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 8 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 9 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 10 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 11 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 12 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and technical specifications clauses 800 and 1206.3 mord and 2702 morth.excluding steel and its fabrication charges, including overhead charges & contractors profit but excluding gst & seignorage charges 13 construction of 1000mm dia. rcc pipe culverts 14 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 15 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 16 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 17 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 18 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 19 construction of 1.00 mts. span rcc slab culverts 20 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 21 filling in foundation trenches with sandas per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 22 providing concrete for plain concrete m 10grade in open foundations using 40 mm nominal size m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days , all incidental charges i.e bailing outwater etc complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage chargesfor leveling coarse 23 providing concrete for plain concrete m15 ( nominal mix ) incutoff walls using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for cutoff walls below gl. 24 providing concrete for plain concrete m15 ( nominal mix ) in sub structure using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for raft 25 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in substructure, and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 & 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for bed blocks & backing walls 26 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in superstructure , and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clauses 800, 1205.4 and 1205.5 mord / sections 1500, 1600 & 1700 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for deck slab 27 supplying, fitting and placing hysd bar reinforcement ( fe 415 ) in substructure complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202 mord / sections 1600 & 2200 morth for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for substructures 28 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 mord / 1600 morth, for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for superstructures 29 providing weep holes in brick masonry, plain / reinforced concrete abutment, wing wall, return wall with 110 mm dia pvc pipe 6kg / cm2 pipe extending through the full width of the structures with slope of 1 ( v ) :20 ( h ) towards drawing face complete as per drawing & technical specifications clauses 614, 709, 1204.3.7 mord / 2706 and 2200 morth, including overhead charges & contractors profit but excluding gst & seignorage charges. 30 road safety interventions 31 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 32 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 33 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 34 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 35 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 36 rehabilitation of btroadfrom pogiri g.sigadam @ 2 / 80 km to boddavalasa of rajam mandal 37 road portion 38 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 39 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 40 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 41 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 42 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 43 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 44 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 45 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work.. 46 road safety interventions 47 providing and fixing of kilometre stones of size 650x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 48 providing and fixing of hectometre stones of sizemm 350x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 49 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work600 mm equilateral triangle sign boards 50 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as per mord specifications of required shade & colour supported & welded ontwo nos. of 47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701 including cost, conveyance, taxes of all materials required & fixing at site as per approved drawing & direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm. 51 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 52 rehabilitation of road from v.p.road @ km 64 / 0 to purli of r.amadalavalasa mandal 53 road portion 54 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 55 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 56 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 57 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 58 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 59 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 60 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specificationclause 1904.2 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete 61 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 62 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 63 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work.. 64 construction of un reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thick , including levelling the formwork as per drawing ) spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction joints @3.00 m spacing , construction joints, primer, sealant, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawingand including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. ( 3.25 mts joint spacing ) 65 construction of 1000mm dia. rcc pipe culverts 66 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 67 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 68 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 69 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 70 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 71 road safety interventions 72 providing and fixing of 5 thkilometre stones of size 350x250x1675 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 73 providing and fixing of kilometre stones of size 650x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 74 providing and fixing of hectometre stones of sizemm 350x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 75 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work 600 mm circular sign boards 76 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work600 mm equilateral triangle sign boards 77 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as per mord specifications of required shade & colour supported & welded ontwo nos. of 47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701 including cost, conveyance, taxes of all materials required & fixing at site as per approved drawing & direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm. 78 rehabilitation of bt roadfrom jodubandala @ 1 / 0 km to regidiin r.amadalavalasa mandal 79 road portion 80 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 81 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 82 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 83 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 84 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 85 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 86 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 87 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work.. 88 construction of un reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thick , including levelling the formwork as per drawing ) spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction joints @3.00 m spacing , construction joints, primer, sealant, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawingand including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. ( 3.25 mts joint spacing ) 89 construction of 1000mm dia. rcc pipe culverts 90 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 91 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 92 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 93 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 94 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 95 road safety interventions 96 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 97 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 98 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 99 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm. 100 rehabilitation of bt road from siripuram to panasapeta via gokarnapalli jn. of santhakaviti mandal 101 road portion 102 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 103 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 104 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 105 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 106 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 107 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 108 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 109 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 110 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 111 construction of 1000mm dia. rcc pipe culverts 112 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 113 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 114 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 115 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 116 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 117 construction of 3.00 mts. span rcc slab culverts 118 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 119 filling in foundation trenches with sandas per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 120 providing concrete for plain concrete m 10grade in open foundations using 40 mm nominal size m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days , all incidental charges i.e bailing outwater etc complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage chargesfor leveling coarse 121 providing concrete for plain concrete m15 ( nominal mix ) incutoff walls using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for cutoff walls below gl. 122 providing concrete for plain concrete m15 ( nominal mix ) in sub structure using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for raft 123 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in substructure, and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 & 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for bed blocks & backing walls 124 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in superstructure , and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clauses 800, 1205.4 and 1205.5 mord / sections 1500, 1600 & 1700 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for deck slab 125 supplying, fitting and placing hysd bar reinforcement ( fe 415 ) in substructure complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202 mord / sections 1600 & 2200 morth for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for substructures 126 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 mord / 1600 morth, for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for superstructures 127 providing weep holes in brick masonry, plain / reinforced concrete abutment, wing wall, return wall with 110 mm dia pvc pipe 6kg / cm2 pipe extending through the full width of the structures with slope of 1 ( v ) :20 ( h ) towards drawing face complete as per drawing & technical specifications clauses 614, 709, 1204.3.7 mord / 2706 and 2200 morth, including overhead charges & contractors profit but excluding gst & seignorage charges. 128 cost and suplly of mastic pad ofsize 25.40mm, including overhead charges & contractors profit but excluding gst & seignorage charges 129 road safety interventions 130 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 131 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 132 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work 600 mm circular sign boards 133 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 134 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 135 rehabilitation of bt road fromr.g.road @ km 2 / 2 to talatampra ( via ) billani of santhakaviti mandal 136 road portion 137 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 138 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 139 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 140 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 141 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 142 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 143 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 144 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 145 road safety interventions 146 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 147 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 148 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 149 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 150 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 151 rehabilitation of bt road from s.kavity chittaripuram r&b road @ km 1 / 2 to kondagudem ( via ) sriharinaidupeta, krishnamvalasa of santhakaviti mandal 152 road portion 153 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 154 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 155 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 156 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specificationclause 1904.2 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete 157 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 158 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 159 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 160 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 161 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 162 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 163 construction of 1000mm dia. rcc pipe culverts 164 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 165 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 166 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 167 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 168 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 169 road safety interventions 170 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 171 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 172 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 173 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 174 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 175 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 176 rehabilitation of bt road from mandavakurity mirthivalasa ( via ) pothurajupeta of santhakaviti mandal 177 road portion 178 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 179 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specificationclause 1904.2 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete 180 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 181 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 182 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 183 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 184 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 185 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 186 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 187 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 188 construction of un reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thick , including levelling the formwork as per drawing ) spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction joints @3.00 m spacing , construction joints, primer, sealant, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawingand including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. ( 3.25 mts joint spacing ) 189 construction of 1000mm dia. rcc pipe culverts 190 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 191 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 192 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 193 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 194 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 195 construction of 600mm dia. rcc pipe culverts 196 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 197 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 198 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 199 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 200 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 600mm dia. 201 road safety interventions 202 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 203 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 204 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 205 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 206 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 207 rehabilitation of bt road from m.r.agraharam to k.r.puram of rajam mandal 208 road portion 209 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 210 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specificationclause 1904.2 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete. 211 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 212 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 213 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 214 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 215 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 216 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 217 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 218 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 219 construction of 1000mm dia. rcc pipe culverts 220 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 221 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 222 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 223 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 224 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 225 road safety interventions 226 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 227 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 228 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 229 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 230 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 231 rehabilitation of bt road from burada vangara road to pattuvardhanam ( via ) bagampeta of vangara mandal 232 road portion 233 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 234 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specification clause 1904.2 mord. 235 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 236 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 237 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 238 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 239 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 240 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 241 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 242 construction of 1000mm dia. rcc pipe culverts 243 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 244 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 245 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 246 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 247 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 248 road safety interventions 249 providing and fixing of 5 thkilometre stones of size 350x250x1675 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 250 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 251 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 252 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 253 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 254 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm...

Panchayat Raj Engineering Department - Andhra Pradesh

34080383 consisting of 11 works in kotabommali, santhabommali, tekkali and nandigam mandals of srikakulam district rehabilitation of bt road from kurudu danta rd to chinasana road via rammurtypeta pulibanda of kotabommali mandal 2 road portion 3 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 4 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 5 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 6 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 7 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 8 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 9 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 10 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.2 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 11 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 12 construction of 1000mm dia. rcc pipe culverts 13 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 14 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 15 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 16 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 17 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 18 construction of 3.00 mts. span rcc slab culverts 19 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 20 filling in foundation trenches with sandas per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 21 providing concrete for plain concrete m 10grade in open foundations using 40 mm nominal size m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days , all incidental charges i.e bailing outwater etc complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage chargesfor leveling coarse 22 providing concrete for plain concrete m15 ( nominal mix ) incutoff walls using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for cutoff walls below gl. 23 providing concrete for plain concrete m15 ( nominal mix ) in sub structure using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for raft 24 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in substructure, and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 & 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for bed blocks & backing walls 25 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in superstructure , and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clauses 800, 1205.4 and 1205.5 mord / sections 1500, 1600 & 1700 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for deck slab 26 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and technical specifications clauses 800 and 1206.3 mord and 2702 morth.excluding steel and its fabrication charges, including overhead charges & contractors profit but excluding gst & seignorage charges 27 cost and suplly of mastic pad ofsize 25.40mm, including overhead charges & contractors profit but excluding gst & seignorage charges 28 supplying, fitting and placing hysd bar reinforcement ( fe 415 ) in substructure complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202 mord / sections 1600 & 2200 morth for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for substructures 29 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 mord / 1600 morth, for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for superstructures 30 providing weep holes in brick masonry, plain / reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1 ( v ) :20 ( h ) towards drawing face complete as per drawing & technical specifications clauses 614, 709, 1204.3.7 mord / 2706 and 2200 morth, including overhead charges & contractors profit but excluding gst & seignorage charges. 31 construction of retaining wall 32 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 33 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 34 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 35 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for cutoff walls below gl 36 providing weep holes in brick masonry, plain / reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1 ( v ) :20 ( h ) towards drawing face complete as per drawing & technical specifications clauses 614, 709, 1204.3.7 mord / 2706 and 2200 morth, including overhead charges & contractors profit but excluding gst & seignorage charges. 37 road safety interventions 38 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 39 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 40 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 41 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 42 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 43 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 44 rehabilitation of btroad nh16 at 564 / 4 km to nh16 via kannevalsa , narayanapuram of kotabommali mandal 45 road portion 46 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 47 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 48 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 49 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 50 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 51 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 52 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work.. 53 providing reinforced cement concrete m25 ( design mix ) in substructure using 20 & 10mm size graded hard stone aggregate, mechanically mixed in superstructure , and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clauses 800, 1205.4 and 1205.5 mord / sections 1500, 1600 & 1700 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for deck slab 54 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 mord / 1600 morth, for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for superstructures 55 construction of rcc guide posts of 250 mm dia m20 grade cast in situ with 20 mm nominal size aggregate ( hbg machine crushed ) , true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawings and technicals specification clause 1608.2 including contractors profit & over head charges, cost of steel and its fabrication charges, but excluding gst and seigniorage charges etc complete for finished item of work. 56 providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm as per tech specification 1916 of mord including cost of materials, conveyance, royalty, oh & cp, taxes, labour, t&p etc including overhead charges & contractors profit but excluding gst and seignorage charges and cost of steel etc. complete for finished item of work. 57 road safety interventions 58 providing and fixing of kilometre stones of size 650x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 59 providing and fixing of hectometre stones of sizemm 350x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 60 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work600 mm equilateral triangle sign boards 61 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as per mord specifications of required shade & colour supported & welded ontwo nos. of 47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701 including cost, conveyance, taxes of all materials required & fixing at site as per approved drawing & direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm. 62 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 63 rehabilitation of road from borubhadra malagam rd to kollipadu via seepuram of santhabommali mandal 64 road portion 65 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 66 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 67 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 68 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 69 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 70 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 71 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 72 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.2 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 73 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work.. 74 construction of 1000mm dia. rcc pipe culverts 75 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 76 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 77 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 78 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 79 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 80 road safety interventions 81 providing and fixing of kilometre stones of size 650x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 82 providing and fixing of hectometre stones of sizemm 350x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 83 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 84 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as per mord specifications of required shade & colour supported & welded ontwo nos. of 47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701 including cost, conveyance, taxes of all materials required & fixing at site as per approved drawing & direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm. 85 rehabilitation of bt roadfrom r.v.road 2 / 4 km to ksipuram in santhabommali mandal 86 road portion 87 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 88 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 89 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 90 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 91 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 92 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 93 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 94 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work.. 95 construction of2 row 1000mm dia. rcc pipe culverts 96 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 97 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 98 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 99 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 100 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 101 construction of 2.00 mts. span rcc slab culverts 102 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 103 filling in foundation trenches with sandas per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 104 providing concrete for plain concrete m 10grade in open foundations using 40 mm nominal size m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days , all incidental charges i.e bailing outwater etc complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage chargesfor leveling coarse 105 providing concrete for plain concrete m15 ( nominal mix ) incutoff walls using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for cutoff walls below gl. 106 providing concrete for plain concrete m15 ( nominal mix ) using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for abutments and wingwalls. 107 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in substructure, and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 & 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for bed blocks & backing walls 108 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in superstructure , and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clauses 800, 1205.4 and 1205.5 mord / sections 1500, 1600 & 1700 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for deck slab 109 supplying, fitting and placing hysd bar reinforcement ( fe 415 ) in substructure complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202 mord / sections 1600 & 2200 morth for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for substructures 110 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 mord / 1600 morth, for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for superstructures 111 road safety interventions 112 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 113 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 114 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for circular of size 600 mm. 115 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 116 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm. 117 rehabilitation of bt road from dpn road to uddandapalem in santhabommali mandal 118 road portion 119 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 120 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 121 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 122 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 123 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 124 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 125 construction of un reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thick , including levelling the formwork as per drawing ) spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction joints @3.00 m spacing , construction joints, primer, sealant, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawingand including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. ( 3.25 mts joint spacing ) 126 road safety interventions 127 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 128 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 129 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 130 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 131 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 132 rehabilitation of bt roadfrom umilada to koduru in santhabommali mandal 133 road portion 134 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 135 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specification clause 1904.2 mord. 136 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 137 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 138 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 139 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 140 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 141 construction of un reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thick , including levelling the formwork as per drawing ) spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction joints @3.00 m spacing , construction joints, primer, sealant, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawingand including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. ( 3.25 mts joint spacing ) 142 road safety interventions 143 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 144 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 145 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 146 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 147 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 148 rehabilitation of bt road from parasurampuram 1 / 2 to peddasanain tekkali mandal 149 road portion 150 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 151 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 152 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 153 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 154 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 155 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 156 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 157 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 158 road safety interventions 159 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 160 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 161 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 162 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 163 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 164 rehabilitation of bt road fromnh16 to jadyada of nandigam mandal 165 road portion 166 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 167 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specificationclause 1904.2 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete 168 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 169 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 170 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 171 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 172 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 173 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 174 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.2 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 175 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 176 construction of un reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thick , including levelling the formwork as per drawing ) spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction joints @3.00 m spacing , construction joints, primer, sealant, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawingand including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. ( 3.25 mts joint spacing ) 177 road safety interventions 178 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 179 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 180 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 181 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 182 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 183 rehabilitation of btroad from penturu to pollada via sivarampuram and dabbalapadu of nandigam mandal 184 road portion 185 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 186 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specificationclause 1904.2 mord including contractors profit & over head charges, but excluding gst and seigniorage etc., complete. 187 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 188 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 189 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 190 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 191 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 192 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 193 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.2 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 194 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 195 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and technical specifications clauses 800 and 1206.3 mord and 2702 morth.excluding steel and its fabrication charges, including overhead charges & contractors profit but excluding gst & seignorage charges 196 construction of 1000mm dia. rcc pipe culverts 197 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 198 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 199 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 200 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 201 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 202 road safety interventions 203 providing and fixing of 5 thkilometre stones of size 350x250x1675 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 204 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 205 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 206 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 207 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 208 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 209 construction of rcc guide posts of 250 mm dia m20 grade cast in situ with 20 mm nominal size aggregate ( hbg machine crushed ) , true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawings and technicals specification clause 1608.2 including contractors profit & over head charges, cost of steel and its fabrication charges, but excluding gst and seigniorage charges etc complete for finished item of work. 210 rehabilitation of bt road from manigam road to vallabharayapadu of nandigam mandal 211 road portion 212 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 213 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre mix carpet and seal coat type b specification clause 1904.2 mord. 214 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 215 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 216 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 217 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 218 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 219 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 220 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.2 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 221 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 222 road safety interventions 223 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 224 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 225 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 226 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 227 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 228 rehabilitation of bt road from kaijola to madanapuram in nandigam mandal 229 road portion 230 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 231 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 232 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 233 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 234 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 235 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 236 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 237 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 238 road safety interventions 239 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 240 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 241 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 242 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 243 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm...

Panchayat Raj Engineering Department - Andhra Pradesh

34080360 package no.aprrp2 / sklm / btr / 02 b , consisting of 10 works in jalumuru, saravakota, narasannapeta and polaki mandals of srikakulam district 1 rehabilitation of bt road fromtilaru road to gatlapadu via ravipadu of jalumuru mandal 2 road portion 3 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 4 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 5 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 6 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 7 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 8 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 9 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 10 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 11 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 12 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 13 construction of 1.00 mts. span rcc slab culverts 14 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 15 filling in foundation trenches with sandas per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 16 providing concrete for plain concrete m 10grade in open foundations using 40 mm nominal size m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days , all incidental charges i.e bailing outwater etc complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage chargesfor leveling coarse 17 providing concrete for plain concrete m15 ( nominal mix ) incutoff walls using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for footings 18 providing concrete for plain concrete m15 ( nominal mix ) in sub structure using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for abutments 19 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in substructure, and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 & 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges upto 5mt height 20 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in superstructure , and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clauses 800, 1205.4 and 1205.5 mord / sections 1500, 1600 & 1700 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for deck slab 21 supplying, fitting and placing hysd bar reinforcement ( fe 415 ) in substructure complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202 mord / sections 1600 & 2200 morth for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for substructures 22 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 mord / 1600 morth, for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for superstructures 23 providing weep holes in brick masonry, plain / reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1 ( v ) :20 ( h ) towards drawing face complete as per drawing & technical specifications clauses 614, 709, 1204.3.7 mord / 2706 and 2200 morth, including overhead charges & contractors profit but excluding gst & seignorage charges. 24 road safety interventions 25 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 26 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 27 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 28 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 29 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 30 rehabilitation of bt road from dl puram to panasalova of saravakota mandal 31 road portion 32 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 33 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 34 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 35 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 36 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 37 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 38 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 39 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 40 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 41 construction of 1000mm dia. rcc pipe culverts 42 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 43 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 44 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 45 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 46 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 47 road safety interventions 48 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 49 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 50 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 51 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 52 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 53 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 54 rehabilitation of bt road from badri goplapuram road to ashokam via gummapadu of saravakota mandal 55 road portion 56 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 57 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 58 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 59 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 60 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 61 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 62 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 63 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 64 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 65 road safety interventions 66 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 67 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 68 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 69 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 70 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 71 rehabilitation of bt road from kothapalli to madanapuram in sarvakota mandal 72 road portion 73 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 74 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 75 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 76 excavation for roadway in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 m, including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections as per technical specification clause 302.3 mord / 301 morth including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 77 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 78 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 79 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 80 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 81 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 82 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 83 construction of 1000mm dia. rcc pipe culverts 84 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 85 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 86 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 87 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 88 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 89 road safety interventions 90 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 91 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 92 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 93 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 94 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 95 rehabilitation of bt road from jj road at karakavalasa to st makivalasa upto mandal limits of saravakota mandal 96 road portion 97 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 98 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 99 construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain ( not exceeding 0.6 m depth ) and foundation of other structures including spreading, sectioning, grading compacting with vibratory roller 80 100knto omc compaction including to a top width of 7.5m and raising to required heightcomplete etc.as perrequirement of tables 300.1 and 300.2 as per technical specification clause 301.5 mord including contractors profit & over head charges, but excluding gst and seignorage charges etc., complete for finished item of work. 100 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 101 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 102 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 103 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 104 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 105 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.2 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 106 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 107 road safety interventions 108 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 109 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 110 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 111 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 112 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 113 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 114 rehabilitation of bt road from makivalasa mabagam road to killam of narasannapeta mandal 115 road portion 116 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 117 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 118 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 119 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 120 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 121 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 122 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 123 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 124 road safety interventions 125 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 126 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 127 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 128 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 129 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 130 rehabilitation of bt road from muddadavanipeta to parlam road via geddavanipeta of narasannapeta mandal 131 road portion 132 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 133 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 134 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 135 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 136 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 137 road safety interventions 138 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 139 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 140 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 141 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 142 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 143 rehabilitation of bt road from kc road to amplam via urjam and nandigam of polaki mandal 144 road portion 145 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 146 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 147 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 148 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 149 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 150 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 151 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 152 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 153 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.2 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 154 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 155 construction of un reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thick , including levelling the formwork as per drawing ) spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction joints @3.25 m spacing , construction joints, primer, sealant, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawingand including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. ( 3.25 mts joint spacing ) 156 construction of 1000mm dia. rcc pipe culverts 157 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 158 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 159 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 160 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 161 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 162 road safety interventions 163 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 164 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 165 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 166 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 167 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 168 rehabilitation of bt road from thotada to dpn road via gollalavalasa, sl puram of polaki mandal 169 road portion 170 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 171 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 172 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 173 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 174 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 175 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 176 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 177 construction of 600mm dia. rcc pipe culverts 178 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 179 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 180 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 181 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 182 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 600mm dia. 183 construction of 2.00 mts. span rcc slab culverts 184 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 185 filling in foundation trenches with sandas per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 186 providing concrete for plain concrete m 10grade in open foundations using 40 mm nominal size m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days , all incidental charges i.e bailing outwater etc complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage chargesfor leveling coarse 187 providing concrete for plain concrete m15 ( nominal mix ) incutoff walls using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for cutoff walls below gl. 188 providing concrete for plain concrete m15 ( nominal mix ) in sub structure using 40, 20 & 10mm size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 and 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for raft 189 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in substructure, and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 804, 805, 806, 807, 1202 & 1204 mord and 1500, 1700 & 2200 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for bed blocks & backing walls 190 providing reinforced cement concrete m25 ( design mix ) using 20 & 10mm size graded hard stone aggregate, mechanically mixed in superstructure , and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clauses 800, 1205.4 and 1205.5 mord / sections 1500, 1600 & 1700 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for deck slab 191 supplying, fitting and placing hysd bar reinforcement ( fe 415 ) in substructure complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202 mord / sections 1600 & 2200 morth for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for substructures 192 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and technical specifications clauses 1002, 1010 and 1202 mord / 1600 morth, for bars below 36 mm dia including over laps and wastage, where they are not welded including overhead charges & contractors profit but excluding gst & seignorage charges for superstructures 193 road safety interventions 194 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 195 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 196 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards 197 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 198 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 199 rehabilitation of bt road from talasamudram road to jonnam of polaki mandal 200 road portion 201 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 202 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 203 construction of granular sub base by providing well graded hbg material ( grading iii material ) ( table 400.1a ) , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with vibratory roller 8 t to achieve thedesired density, complete as per technical specification clause 401 mord / morth including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 204 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 205 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 206 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 207 construction of un reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 ( grade ) , coarse and fine aggregates conforming to is : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork ( steel channel, laying and fixing of 125 micron thick , including levelling the formwork as per drawing ) spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction joints @3.25 m spacing , construction joints, primer, sealant, curing of concrete slabs for 14 days, curing compound ( where specified ) and water finishing to lines and grade as per drawingand including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. ( 3.25 mts joint spacing ) 208 construction of 600mm dia. rcc pipe culverts 209 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 210 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 211 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 212 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 213 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 600mm dia. 214 road safety interventions 215 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 216 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 217 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 218 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 219 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm...

Panchayat Raj Engineering Department - Andhra Pradesh

34080354 package no.aprrp2 / sklm / btr / 01 a, consisting of 2 works in amadalavalasa and sarubujji mandals of srikakulam district 1 rehabilitation of bt road from akkulapeta to bobbilipeta of amadalavalasa mandal 2 road portion 3 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 4 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 5 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 6 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 7 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 8 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 9 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 10 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 11 construction of1 1000mm dia. rcc pipe culverts 12 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 13 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 14 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 15 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 16 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 17 road safety interventions 18 providing and fixing of kilometre stones of size 350x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 19 providing and fixing of hectometre stones of sizemm 650x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 20 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for equilateral triangle of size 600 mm. 21 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded ontwo nos. of47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm 22 providing and erecting direction and place identification of semi reflective village boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as permord specifications of required shade & colour supported & welded on47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15 grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701including cost, conveyance, taxes of all materials required& fixing at site as per approved drawing& direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work of village boards of size 900 x 600 mm 23 rehabilitation of btroad from ab road 21 / 8 km to chinamatalabpeta of sarubujjili mandal 24 road portion 25 clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth up to 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness ( in area of non thorny / light jungle ) as per technical specification clause 201 mord including overhead and contractor profit but excluding gst and seignorage charges etc., complete for finished item of work. 26 scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with all lifts and lead upto 1000 m as per technical specification clause 305.4.3 morth including contractors profit & over head charges, but excluding gst etc., complete..or finished item of work. 27 construction of embankment with approved material obtained from borrow pits with all lifts, transporting to site, spreading, grading to required slope and compacting with vibratory roller 80 100 kn to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 mord / 305 morthincluding overhead charges & contractor profit, but excluding gstand seignorage charges etc., complete for finished item of work. 28 providing, laying, spreading and compacting hbg graded machine crushed stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer ( pug mill ) , carriage of mixed material by tipper to site, layingin uniform layers in sub base / base course on a well prepared sub base and compacting with smoothwheel roller of 80 to 100kn / vibratory roller 80 100 kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406 mord / morth, including overhead charges & contractor profit, but excluding gst and seignorage charges etc., complete for finished item of work. 29 construction of shoulders by providing selected earth having mdd not less than 1.85g / cc with ll & pi not exceeding 40% and 20% respectively and and spreading in uniform layers with tractor grader on prepared surface and compacted to omc with vibratoryroller of 80 to 100kn capacity to achieve the desired density, complete as per irc technical specification clause 303 mord 305, mort&h by using machinery including allover heads, and contractors profit, but excluding gst and seigniorage charges etc, complete for finished item of work. 30 providing and applying primer coat with bitumen emulsion ( ss 1 ) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 1.0 kg / sqm using mechanical means as per technical specification clause 502 mord ( for use on wet mix macadam & wbm ) , including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 31 providing and applying tack coat with bitumen emulsion ( rs 1 ) using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503 mord, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work. 32 providing and laying semi dense bituminous concrete with 40 60 tph batch type hmp producing an average output of 37.5 tonnes per hour using crushed aggregates of specified grading, ( grading ii using 9.50mm nominal size ) premixed with bituminous binder @ 5% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per mord specification clause no. 509 complete in all respects, including overhead charges & contractors profit but excluding gst and seignorage charges etc., complete for finished item of work.. 33 construction of 1000mm dia. rcc pipe culverts 34 earthwork in excavation for structures in ordinary soils as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal up to a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per technical specification 305 mord / 304 morth , including all incidental charges i.e bailing outwater etc including overhead charges & contractors profit but excluding gst and seignorage charges. 35 filling with sand in foundation trenches as per drawing and technical specification clause 305.3.9 mord & 304 morth, including overhead charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 36 providing concrete for plain concrete m 10 grade in open foundations using 40 mm nominal size hbg m / c graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days, all incidental charges i.e., bailing outwater etc., complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth, including overhead charges & contractors profit but excluding gst & seignorage charges for leveling coarse. 37 providing concrete for plain concrete m15 ( normal mix ) in headwalls using 40, 20 & 10mm size hbg machine crushed ( ss5 ) graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 mord and 1500, 1700 & 2100 morth , including overhead charges & contractors profit but excluding gst & seignorage charges for head walls 38 providing and laying np3 reinforced cement concrete socket and spigot pipes confirming to bis 458 / 2003for culverts on first class bedding of granularmaterial includingfixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head wall and parapets tech specification clause 1106 mord, including overhead charges & contractors profit but excluding gst and seigniorage charges for finished item of work with 1000mm dia. 39 road safety interventions 40 providing and fixing of kilometre stones of size 650x250x1100 mm precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.55x0.55x0.60 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 41 providing and fixing of hectometre stones of sizemm 350x150x1100 precasted with rcc ( 1:2:4 ) using 20 mm and 10 mm hbg metal and using 5 kgs / sqm of steel hysd bars including cost and fabrication charges and embedding these stones in 0.35x0.30x0.40 m size cement concrete m20 grade cc ( 1:2:4 ) using 20 mm and 10 mm hbg metal below ground level, painting , lettering etc complete as per drawings and technical specification clause 1703 of mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work. 42 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work600 mm equilateral triangle sign boards 43 providing and erecting direction and place identification of semi reflective sign boards as per as per irc 67 made of 2 mm thick ms sheet duly stove enameled paint white colour in front and grey colour on back with reflective border of 70mm width& required message letters & figures with reflective tape engineering grade as per mord specifications of required shade & colour supported & welded ontwo nos. of 47mmx47mmx12swg sheet tube of 3050 mm height duly strengthened by 25 mm x 5 mm ms flat iron on edges on back firmly fixed to ground by mean of property designed foundation with m 15grade cement concrete 450mmx600mmx600mm below ground level as per approved drawing clause 1701 including cost, conveyance, taxes of all materials required & fixing at site as per approved drawing & direction of engineering in charge including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for main information board of size 1500 x 1200 mm. 44 construction of rcc guide posts of 250 mm dia m20 grade cast in situ with 20 mm nominal size aggregate ( hbg machine crushed ) , true to line and grade, tolerance of vertical rcc posts not to exceed 1 in 500 as per drawings and technicals specification clause 1608.2 including contractors profit & over head charges, cost of steel and its fabrication charges, but excluding gst and seigniorage charges etc complete for finished item of work. 45 providing and fixing of retro reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 mord fixed over aluminium sheeting 1.50 mm thick supported on a mild steel iron post 75mmx75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m15 cement concrete 450mm x450mmx600 mm, 600 mm below ground level as per drawings and technical specification clause 1701 mord including cost and conveyance of all materials, all labour charges, over head charges & contractors profit but excluding gst and seigniorage charges etc., complete for finished item of work for 600 mm. circular sign boards...

Ministry Of Defence - Andhra Pradesh

33876823 bids are invited for custom bid for services hiring of conservancy for cutting and removal of grass bushes shrubs etc and clearance of drainages and building at nad bheemunipatnam...

Municipalities - Andhra Pradesh

33814175 supply and delivery of plants and shrubs for centralmedian planitation at gollapalle ring road , banglore road , kadiri road in madanapalle municipality under 15th fc...

Municipalities - Andhra Pradesh

33413840 general funds 2022 23 providing tree plantation, hedge / shrub planting from existing divider at gayathri nagar road....

Municipalities - Andhra Pradesh

33389853 general funds 2022 23 providing tree plantation, hedge / shrub planting from existing divider at rtc bus stand road....

Municipalities - Andhra Pradesh

33389850 general funds 2022 23 providing tree plantation, hedge / shrub planting from existing divider at murakambattu to penumur cross tirupati road....

Ministry Of Defence - Andhra Pradesh

33312939 bids are invited for custom bid for services hiring of conservancy for cutting and removal of grass bushes shrubs etc and clearance of drainages and building at nad bheemunipatnam...

TIRUPATI URBAN DEVELOPMENT AUTHORITY - Andhra Pradesh

33206663 clearing of light jungle growth and unwanted weed growth in tank area (including tank inside slope and open areas in different sport game courts) and maintenance (3 years) of landscaped area (hedge / shrub plantation lawn area) and peripheral plantation in thummalagunta tank, during the years 2022 25...

Military Engineer Services - Andhra Pradesh

32965241 replacement of defective light, repair and maint of lt panel board metering equipment, switch gears, day to day maint of 11 kv distribution cables, attending complaint and replacement of unsv ug cable gallery earthing, earthing strips all allied work replacement of defective light, repair and maint of lt panel board metering equipment, switch gears, day to day maint of 11 kv distribution cables, attending complaint and replacement of unsv ug cable gallery earthing, earthing strips all allied work servicing / maintinance ofmultiple section oflt panel board in one substation comprising minimum up to 05 nos acbs / mccbs / sdfs , busbar chamber, swich gear chamber, metering chamber cable termination / tray chamber after opening front / top / side / back cover by using forced air pressure andbrushes, cleaning of all dust / durt, complete cleaning of out side surface of panel board using suitable cleaning agents, tighting of all nuts & bolts of busbar / switchgear / cable terminals, repair / replacement to defective metering wiring from acb / mccb / ct to meter and replacement of defective meters, cts, indicator lamp, metering terminal blocks, mcb, replacement of defective aluminum cable lugs, nuts bolts washers, replacement of defective panel knob / door knob and hinges complete all as specified and as directednote: ( i ) panel meter, indicator lamp, mcb, busbarand ct will be measured and paid seperately as supply only. ( ii ) required aluminium cable lugs, metering cables and nuts bolts washers shall be inclusive of quoted rate. ( iii ) servicing / maintinance of acbs measured seperatelly. 2 all as per item no 1.00 above but comprisingacbs / mccbs / sdfs up to total 10 nos 3 all as per item no 1.00 above but comprisingacbs / mccbs / sdfs up to total 15 nos 4 all as per item no 1.00 above but comprisingacbs / mccbs / sdfs up to total 23 nos 5 all as per item no 1.00 above but comprisingacbs / mccbs / sdfs up to total 28 nos 6 servicing, repair, maintinance of air circuit breaker 630 amps to 3200 amps capacity by drawing out movable unit, forced air cleaning of movable and fixed unit, decarbonize breaker contracts and checking for any defects due to any flush / loose contact, cleaning of all fixed and moving contact point, terminal connection points with ctc, replacement of defective parts and re fixing acb, cables completes all as specified and as directed. note: ( a ) required male / female acb contacts, trip coils, closing coils, electronic protection unitwill be measured as supply only. ( b ) all cleaning agents are included in the quoted rate. 7 supply only fixed contract of acb 630a to 3200acomplete all as specified and as directed 8 supply only moving contract of acb 630a to 3200acomplete all as specified and as directed 9 supply only electronic protection unit of acb 630a to 3200acomplete all as specified and as directed 10 supply only shunt trip coil of acb 630a to 3200acomplete all as specified and as directed 11 supply only closing coil acb 630a to 3200a complete all as specified and as directed 12 supply only digital electronic ammeter ( 0 3200 amps range ) withbuilt in selector switch suitable for lt 415 v panel flush pattern square type 96 mm x 96 mm with adopter completeall as specified and directed. cat part no: 30002385 ( dm3110 ) make: schneider or conserve / l&t / hpl 13 supply only digital electronic volt meter ( 0 500 volts range ) withbuilt in selector switch suitable for lt 415 v panel flush pattern square type 96 mm x 96 mm with adopter completeall as specified and directed. cat part no: 30002386 ( dm3210 ) make: schneider or conserve / l&t / hpl 14 supply only indication lamps ( led type ) red, yellow and blue in colours of 22.5 mm dia to monitor on lt panel board suitable for 240 v ac supply and taking down unserviceable indication lamps complete all as specified and directed. cat part no: 1sfa619402r5201 make: siemens / c&s / schneider / abb 15 supply only metering current transformer of 1000 / 5 amps class 1, 15 va, completeall as specified and directed by engr in charge.make: rishabh or equivelent of kappa / ae 16 supply only metering current transformer of 1200 / 5 amps class 1, 15 va, all complete all as specified and directed.make: rishabh or equivelent of kappa / ae 17 supply only metering current transformer of 1600 / 5 amps class 1, 12.5 va, complete allas specified and directed.make: rishabh or equivelent of kappa / ae 18 supply only metering current transformer of 2000 / 5 amps, class 1, 12.5va, complete all as specified and directed. make: rishabh or equivelent of kappa / ae 19 supply only metering current transformer of 2500 / 5 amps, class 1, 5va, complete all as specified and directed. make: rishabh or equivelent of kappa / ae 20 supply only metering current transformer of 3000 / 5 amps, class 1, 1.5va, complete all as specified and directed. make: rishabh or equivelent of kappa / ae 21 supply only metering current transformer of 800 / 5 amps, class 1, 2.5va, complete all as specified and directed. make: rishabh or equivelent of kappa / ae 22 supply only switch disconnector fuse unit , tpn , open execution, bolted fuse link, 415v, conforming to is / iec 60947 3, telescopic shaft for depth adjustment terminal shrouds on both side, door interlock facility of current rating 250 amps including boted hrc fuse 03 nos ( make l&t, cat no fn 250 tpn sk 95682 & hrc fuse st 30781 or equivelent of siemens / abb / havells ) 23 all as per item no 22.00 above but capacity of 400 amps. ( make l&t, cat no fn 315 tpn sk 95591 & hrc fuse st 30784 or equivelent of siemens / abb / havells ) 24 supply only hrc fuse of capacity 400 ampscomplete all as specified and as directed ( make l&t cat no sf94335 and equivalent to standard / ge / schneider ) 25 supply only hrc fuse of capacity 250 ampscomplete all as specified and as directed ( make l&t cat no sf94333 and equivalent to standard / ge / schneider ) 26 supply and fix mccb, 4 pole, 400 amp, 36 ka braking capacity, ics = 100% icu as per iec 60947 2, with micrologic 2 ( up asic based ) , complete all as specified and as directedmake schneider cat part no lv432677 or equivelent of legrand / abb 27 all as item no 26.00 above but of size 4 pole, 630 amp, 36 ka. make make schneider cat part no lv432877 or equivelent of legrand / abb 28 all as item no 26.00 above but of size 4 pole, 250 amp, 36 ka. make make schneider cat part no lv431780 or equivelent of legrand / abb 29 all as item no 26.00 above but of size 3 pole, 160 amps, 36 ka. make schneider cat part no lv430770 or equivelent of legrand / abb 30 supply and fix mccb 3 pole, 125 amps, 25 ka braking capacity, ics = 100% icu as per iec 60947 2, with thermal magnetic trip unit. complete all as specified and as directed make schneider cat part no lv430311 or equivelent of legrand / abb 31 supplay, fix and connecting by mannualchangover switchsheet steel enclosure versionconforms to iec 60947 3 of capacity 630 amps four pole complete all as specified and as directed ( make l&t cat part no co46300osooor equicalent to havells / indo asian. 32 supplay, fix and connecting by mannualchangover switchsheet steel enclosure versionconforms to iec 60947 3 of capacity 400 amps four pole complete all as specified and as directed ( make l&t cat part no co44000osooor equicalent to havells / indo asian. 33 supplying and laying synthetic rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per is 15652 2006, ( superseding is 5424 ) suitable for electrical shock safety of sizes 2m x 1m.complete all as specified and as directed 34 m&l for painting of outer surface of multiple section ofcomplete lt panel board size up to 5.5 m x 3.2 in one substation comprising acbs / mccbs / sdfs , busbar chamber, swich gear chamber, metering chamber cable termination / tray using one coat of synthetic enamel paint after preparation of surface, providing protection cover to all metering equipment, panel meters, switchgears, cleaning of all meters and switch gearscomplete all as specified and as directed 35 all as per item no 34.00 above but lt panel board size up to 7.5 m x 4.5 m. 36 m&l for painting of both side surface of ms cable trench cover using one coat of black bituminius paint after preparation of surfacecomplete all as specified and as directed 37 m&l for plate girder or single stanchions, fe 290 built up of one beam or channel section with flange plates, caps bases, splices, angle brackets, cleats and other connection and taking out of oldunsv ms cable cover / support structure. 38 dimantling, taking out all earth connection of strip from panel board to earth test pit any size and replace the worn out earth strip, nut / bolts / washers connect all joint with new nots, bolts and washers to in original positioncomplete all as specified and as directednote : earth gi strip measured and paid separetely 39 m & l for earth continuity conductor gi strip of size 32 x 6 mmcomplete all as specified and as directed 40 m&l for writing letter and fixing lt panel boardsurface showing incoming and outgoing capacity inamps and feeder name of letter five not less than 30 x 50 mm complete all as specified and as directed 41 dismantlingexisting unserviceable / corrodedlt pillar box and supply, fabricate, install, testing and commissioning out door type, double door dust & vermin proof lt pillar box of 2.1 m length, 1 m width & 1.6 m height fabricated vertically by using 50x50x5 mm angle iron frame, fixing with nuts & bolts on 75 x 40 mm ismc as per directions of engineer in charge and using 3 mm thick crca ms sheet all over body front and back cover with hinges and aldrops for locking arrangments, 1 mm thick frp coating all over the external surfaces and 3 mm thick ms sheet for bus bar cover, piller box, partitions and bottom cable entry covers duly painted with one coat of redoxide and two coats of synthetic enamel paint including control wiring complete in lt piller box with 1.5 sq mm frls copper conductor cable and 5a mcb sps 2.5 amp for meters, breaker control supply and indication lamps and provision to accommodate the following: ( a ) 3 ph+1n copper busbar of equal sizes of capacity 1.5 times of ratedcurrent of incoming switchgear. ( b ) 3 ph+1n copper busbar of equal sizes of capacity 1.5 times of ratedcurrent of outgoing switchgears as down links / connectivity links to switchgear. 42 ( c ) digital ammeter & voltmeter for incoming & digital ammeter for outgoing. ( d ) led indication lamps for ryb for incoming and outgoing indication. ( red, yellow & blue coloured ) ( e ) lt acb – 1600amps, 4p, 50ka, complete with over current and earth fault tripping device as incomer 01no ( f ) lt acb 1600 amps, 3p, 50 ka complete with over current and earth fault tripping device as out going 01 no ( g ) mccb 630amps, 3p, 36ka complete with over current and earth fault tripping device as out going 01no ( h ) mccb 400amps, 3p, 36ka complete with over current and earth fault tripping device as outgoing 01nonote : ( i ) unit rate quoted include for necessary grouting / chipping of concrete and anchor fastners and providing necessary pcc ( 1:2:4 ) type b1 using 20 mm gradedcrushed stone agreegate for foundation to fix the lt piller box. ( ii ) cost of digital ammeter, voltmeter, led lamps, cts, lt acbs, mccbs and mcbs shall be included in the quoted rate. ( iii ) drawing shall be got approved by ge before fabrication of the lt piller box. ( iv ) all incoming and outgoing cable connections are to be made as per existing one and rate deemeded to be included in the quoted rate. ( v ) the pillar box shall be brought to jetty gallery part by part and to be assembled in site being limited space of work / movement and rate shall deemed to be included in quoted rate. ( vi ) copper busbars with pvc sleeves shall be measured and paid seperately under respective item in this schedule as supply only 43 supply only copper bus bar links with pvc sleeves of raing 630 a to 2000 acomplete all as specified and as directed 44 supply and fix lt acb 4 pole4000 a, 50 ka breaking capacity, 415 v, 50 hz, manual drawn out type and manually charged with micro processor et2l trip unit ( without display ) release protection system against over current, earth fault and short circuit with 2 no + 2 nc auxiliary switch, safety shutter, cradle guard, operating handles conforming to iec 60947 2 & 3complete all as specified and as directedmake: cat.no. mvs40n4mw2lofschneider / l&t / abb / ge / legrand 45 all as per item no 44.00 above but of capacity2000amps, 4polecat.no. mvs20n3mw2lof schnider equivelent make inl&t / abb / ge / legrand 46 all as per item no 44.00 above but of capacity1600amps, 4polecat.no. mvs16n3mw2l of schnider equivelent make inl&t / abb / ge / legrand 47 all as per item no 44.00 above but of capacity1250amps, 4polecat.no. mvs12n3mw2l of schnider equivelent make inl&t / abb / ge / legrand 48 all as per item no 44.00 above but of capacity1000amps, 4polecat.no. mvs10n3mw2lof schnider equivelent make inl&t / abb / ge / legrand 49 attending day to day electrical complaints and call on repair of control panel of street light, security light, garden light, perimeter light, tower light & high mast light providedinsidedockyard, decarbonizing all contact points of contactors , replacement of wornout aluminium cable lugs, wornout screws, nuts, bolts and washers, tightening the loose connections whereever required, adjustment of timer, cleaningand restore the power supply complete all as specified and as directednote : ( i ) replacement of spares vizmcb, mccb, contactors, timers, cables, will be measured and paid for separately as supply only and labour element for taking down the replaced spares shall be deemed to include in the unit rate quoted. ( ii ) if the qty of complaints to be attended in a control panel / lt panel is more than 01 no in a day, altogether the complaints will be considered only 1 ( one ) . ( iii ) the contractor has to engage qualified electricians and helpers in sufficient nos to attend and rectify the defects. ( iv ) job card for repairing work will be issued by concern je and the same shall be signed by contractor / or his rep and shall be returned to concerned je on completion of each job work. 50 material and labour for disconnecting the burnt out high mast tower winch motor 3 phase , 415v, 50hz, 1400 rpm, 4 pole, 2hp and rewinding with supper enameled copper wire of same gauge / size of wire including re fixing the same in its original position testing and commissioning complete all as specified and as directed 51 material and labour for servicing of high mast tower control mechanism by greasing and varnishing of electric motor 2 hp, 3 phase 415 volts 50hz including replacement of unsv plug and socket for trouble free functioning including painting of starter panel with one coat of synthetic enamel paint complete all as specified and as directed 52 supply and fixing high mast tower winch motor 3 phase 415 v 50hz 1400 rpm 4 pole 2hp complete all as specified and as directed 53 s&f pvc junction box of outdoor type, weather proof, with provision of hole at bottom for cable entry, hinged door with locking arrangement, of size not less than 200mm ( l ) x 100mm ( b ) x 300mm ( h ) incl taking down unserviceable one, fixed to pole with ms clamp, nuts, bolts and washers complete including one 3ph 4 pole connection block. complete all as specified and as directedmake syntex / hansel 54 supply and fixing / laying through trench.surface or wall including required necessary saddle / clamp any highthdpe double wall pipe corugated pipe of size 40 mm dia for cable protection laid in trenches in lieu of sand / brick protection complete all as specified and as directed 55 taking out old unserviceable lt ug cable of any size any description including hdpe pipe and bricks for cable protection where ever appeared and complete all as specified and as directed 56 supply and laying in trenches xlpe insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade cross section area 6 sqmm 2 core and connection complete with aluminium cable lugscomplete all as specified and as directed 57 all as per ser no 56.00 but of size 10 sqmm, 4 core 58 all as per ser no 56.00 but of size 16 sqmm 4 core 59 all as per ser no 56.00 but of size 25 sqmm 3.5 core 60 all as per ser no 56.00 but of size 35 sqmm 3.5 core 61 m&l for dismatling and taking out street light cable loop near pole forsize of cable 6sqmm to 25 sqmm after dismantling connection from junction box, cutting, removing damaged portion of the cable ends, providing new aluminium cable end terminals, laying of cable through protection pipe through coping to junction box including necessary connection complete all as specified and as directed. ( note: earth work, pole coping pcc, cable protection, pipe measured separately ) 62 m&l for dismantling taking out cables 10 sqmm to 16 sqmm from trench, including making straight through joints at damaged portion and relaying to trench complete all as specified and as directed ( note: earth work, hdpe pipe for cable protection will be measured and paid separately. heat shrink straight through cable joints inclusive of quoted rate ) 63 m&l for dismantling taking out cables 25 sqmm to 35 sqmm from trench, making straight through joints at damaged portion and relaying to trench complete all as specified and as directed ( note: earth work, hdpe pipe for cable protection will be measured and paid separately. heat shrink straight through cable joints inclusive of quoted rate ) 64 supply and fixing pvc insulated, pvc round shethed copper flexible electric cable 1.5 sqmm 3 core, 1100 volts grade and dismantling wornout / defective cables from sl / flood light fitting at pole / tower top to jb at bottom of pole through pole / tower complete all as specified and as directedmake : plaza / gloster / havells / polycab. 65 m&l for complete servicing, repair, maintenance of timer panel, by cleaning inside and outside, replacement of burnt mcb, mccb, timer, contactor, wiring, bypass toggle switch complete all as specified and as directednote: replacement of mcb, mccb, timer, contactor shall be measured as supply only 66 supply only power contactor 3 phase, 415v, 32 amps cap utilsed for heavy duty by taking down the old perished / deteriorated contactor complete all as specified and as directedmake: schneider, model etvs lc1e3201 or equivelent of legrand / l&t / abb 67 supply only surface mounting analog time switchesheavy duty of 230 v 50hz including dismantling taking down unsv one and complete all as specified and as directedmake : 6499 15 maxi rex 4qt ( daily ) of legrand or equivelent of abb / l&t 68 supply only mcb, sp, 10ka, c 6 32 a including dismantling taking down unsv onecomplete all as specified and as directedmake: schneider or equivelent of legrand / abb / l&t 69 supply only mcb, dp, 10ka, c 40a 63 a including dismantling taking down unsv one complete all as specified and as directed make: schneider or equivelent of legrand / abb / l&t 70 supply only mcb, 4p, 10ka, c 40a 63 a including dismantling taking down unsv onecomplete all as specified and as directedmake: schneider or equivelent of legrand / abb / l&t 71 supply only mccb with thermal magnetic release, 16 ka, 3 pole, 415v, 100 a, complete all as specified and as directedmake: schneider , model easy compact cvs 100 bs, lv510950 to 58 or equivelent of legrand / abb / l&t 72 m&l for dismantling of non functional street light / flood lightfrom any type of pole at hight upto 9 mtr by suitable ladder for repair of the same for replacement unserviceable items like led driver, connector block and decarbonising contact points and refixing the same to pole after repair of any type securitylight .note: required led driver shall be measured and paid separately 73 supply only led driver suitable for street light fitting 1x 120 watt, 230v, make cg / halvells / bajaj / philips / wipro 74 supply only led driver suitable for street light fitting 1x 150 w , 230v, make cg / halvells / bajaj / philips / wipro 75 supply only led driver suitable for flood light fitting 1x 200 w, 230v, make cg / halvells / bajaj / philips / wipro 76 supply only led driver suitable for flood light fitting 1x 250 w, 230v, make cg / halvells / bajaj / philips / wipro 77 s&f on wall / pole timer enclosure out door type complete with timeranalog time switchesheavy duty of 230 v 50hz, power contactor 3 phase mnx 18 , 415v, 32 amps, mcb, tpn, 10ka, c 40a 63 a with, rotary switch with connector for incoming and outgoing cable entry complete all as specified and as directedmake indi asian / havells 78 m&l for painting of steel fabricated light tower not less than 10 mtr high with one coat of aluminium paint after preparation of complete surface complete surface including writing tower number with synthetic enamel black paint complete all as specified and as directed 79 m&l for painting of steel tubular pole any type / swan neck pole with one coat of aluminium paint after preparation of complete surface including writing pole number with synthetic enamel black paint complete all as specified and as directed 80 m&l for white wash to pole coping pcc complete all as specified and as directed 81 s & f street light fitting led 150 watt watt incl dismantling taking down unsv one complete all as specified and as directed.make cg or equivelent of halvells / bajaj / philips / wipro 82 s & f flood light fitting led 210 watt watt incl dismantling taking down unsv one complete all as specified and as directedmake cg or equivelent of halvells / bajaj / philips / wipro 83 s & f flood light fitting led 300 watt incl dismantling taking down unsv one complete all as specified and directed, make cg, model cfs 501 300 57 60d sl gl ngg or equivelent of halvells / bajaj / philips / wipro 84 s & f flood light fitting led 350 watt incl dismantling taking down unsv one complete all as specified and directed, make cg, model cfs 501 350 57 60d sl gl ngg or equivelent of halvells / bajaj / philips / wipro 85 taking down old unserviceable aviation light fitting, and supply & fix new led aviation light fitting withyellow painted die cast aluminium alloy housing, red coloured polycarbonate dome and accessories includingclamps, nuts, bolts and service connections up to the junction box complete all as per make bajaj andcat no.bjaol 2 bc gls 2 x 100w bc bajaj or eqiuvalent in philips / cg / havells / wipro. 86 excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft loose soil for cable work or from above cable duct complete all as specified and as directed 87 returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed. 88 removing of excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. 89 m&l for dry sand cushioning for under groundcable provided with layer and sand 8 cm deep before laying the cable and 15cm after laying the cable complete all as specified and as directed. 90 supplying and laying un reinforced precast concrete cable cover, class hv, type 1, flat, size 300mm x 180mm x 40mm complete all as specified and as directed 91 surface dressing of areas of above cable duct by clearing away all grass, wild vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30cm girth and removing rubbish upto a distance of 50 meters outside the periphery of the area under clearance complete all as specified and as directed 92 m & l making chequrered plates as per existing sizes and thickness both side lifting handle as per existing one including painting of one coat red oxide primerand two coat of black bituminius paint, including necessary pcc wks as per site requirment and taking out of old unsv chequered plate complete all as specified and directed. 93 cleaning of cable duct of size 1.2 x 1.0 by removing out all mud, soil, waste materials and disposal of waste materials to nearest gurbage bin and soil mud to low laying area of dockyard 94 s / f of cable rack made with structural steel section of isa 75x75x8mm, ( fe 290, gde e 165 ) pre welded, inside duct, on wall , placing in position and fixing to wall with fastener steel bolt not less than20 mm dia, including painting with one coat of red oxide and two coat of black bituminous paint all as specified and directed. note: cable rack drawing shall be obtained from engr in charge. 95 dismantling taking out unserviceable ms cable support from wall / surface of gallery any type by removing nuts & bolts / cutting braces complete all as specified and as directed 96 taking out old unsv ht ug cable of any size and any description including gi pipe of any dia and bricks for cable protection where ever appeared and complete all as specified and as directednote: ( 1 ) excavation and earth work shall bemeasured and paid separately. ( 2 ) serviceable cable obtained shall be stacked properly for re use. 97 m & l xlpe insulated, screened, pvc bedded, galvanised steel strip or wire armoured, electric power cables ( heavyduty ) with aluminium conductor, 11000 volts earthed, grade cross sectional area 185 sq. mm 3 core complete all as specified and as directed 98 all as per item no 97.00 above but for cable sizes 240 sqmm 3 core 99 all as per item no 97.00 above but for cable sizes 300sqmm 3 core 100 all as per item no 97.00 above but for cable sizes 400sqmm, 3 core 101 supply only cable jointing kit for 11 kv ( earthed ) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 185 sqmm incl dismentling / taking down unserviceable one complete all as specified and as directed 102 all as per item no 101.00 above ( indoor termination ) but for cable of size 240sqmm to 300 sqmm incl dismentling / taking down unserviceable one complete all as specified and as directed. 103 all as per item no 101.00 above ( indoor termination ) but for cable of size 400 sqmm incl dismentling / taking down unserviceable one complete all as specified and as directed. 104 supply only cable joining kit for 11 kv ( earthed ) grade cable for straight through heat shrink type joint complete with joining material and accessories suitable for 3 core xlpe armoured aluminium conductor cable of size 185sqmm incl dismentling / taking down unserviceable one. 105 all as per item no 104.00 above ( straight through heat shrink type joint ) but for cable of size 240sqmm to 400 sqmm incl dismentling / taking down unserviceable one complete all as specified and as directed. 106 m & l for road cutting / hard standing to a depth not less than 80 cm and not less than 60 cm wide for laying of gi pipe to draw to ugcable and making good the disturbed surface by filling of pcc ( 1:3:6 ) type c 2 using 40 mm graded stone aggregate and finished the surface even and smooth with out using extra cement and disposal off the surplus debris and soil to a distance not exceeding 50 m complete all as specified and as directed by engr in charge. 107 m & l 80 mm bore gi pipe tubes light grade for cable protection supporting with all fixing accessories ( clamp, nuts, bolt and washer etc ) complete all as specified and as directed by engr in charge. 108 dismantling taking out ht cable from cable rack / floor at gallery of marine jetty for repair / replacement of wornout steel cable rack or for realingnment of cable and refixingthe cables with proper staking with proper alignment of cable on repaired / existing rack and making feeder wise bundle of cable using pvc cable tie for sizes of cable 3 core, 185 to 240 sqmm, 11000 volts grade complete all as specified and as directed. note: each cable shall be measured separately.steel cable rack shall be measured separately as supply and fix 109 all as per item no 108.00 above but for cable sizes 300 to 400 sqmm, 3 core. 110 m&l for finding of cable fault of ug 11000 volts grade cable inside trench ( under soil / drain / pcc / road / trench ) by disconnecting both cable ends, using insulation tester, cable path / fault finder and rectification complete by necessary excuvation, cutting at fault position, fixing of straight through heat shrink joint, for cable sizes 185 sqmm to 400 sqmm, 3 core, 11000 volts grade or replacement of heat shrink indoor cable joint kit of size 185 sqmm to 400 sqmm, 3 coreand reconnection of both cable end to original position after complete satisfactory insulation test, fixing with old or required new nuts bolts washers complete with testing complete all as specified and as directednote: ( a ) items required for rectification such as heat shrink indoor cable joint kit / heat shrink straight through joints / heat shrink sleeves and earth work shall be measured separately . ( b ) required aluminium cable lugs and nuts bolts washers shall be inclusive of quoted rate. ( c ) contractor shall bring necessary testing equipment and rate shall be inclusive of quoted rate. 111 m&l for earthing complete with glvn. gi plate earth electrode 60cmx60cmx6 mm thick burried in ground vertically to a depth n. less than 1.5 m below normal gl, connected to gi strip32x6 mm earth lead by means of nuts, bolts, check nuts & washers all as specified and indicated inclu. concrete pit in pcc 1:3:6 type c 2 rcc, precast pit cover slab 400mmx400mmx80mm with handle for lifting made out of 8mm dia ms rod fixed flush to pit, funnel, wiremesh, 20mm dia gi pipe medium grade for watering charcoal and salt in alternate layers including necessary earth work excuvation & removal etc complete all as specified in plate no 5 of ssr part i 1991 ( zone e ) 112 m & l for earth continuity conductor gi strip of size 32 x 6 mm . 113 painting chequrered plates as per existing sizes and thicknessof one coat red oxide primerand two coat of black bituminius paint, complete all as specified and as directed 114 supply and fix cable route indicator to indicate path of ht cable 11000 volte material usde cast iron with pcc work complete all as specified and as directed...

Ministry Of Railways - Andhra Pradesh

32964692 custom bid for services up keeping and maintenance of rest houses orhvip old srh and holiday home maintenance of lawn shrubs hedge trees etc including watering trimming manuring spraying insecticide and guarding as required this includes supply of...

Ministry Of Defence - Andhra Pradesh

32935164 bids are invited for and removal of grass bushes shrubs etc and clearance ofdrainages and building at nad bheemunipatnam total quantity : custom bid for services hiring of conservancy for cutting and removal of grass bushes shrubs etc and clearance of drainages and building at nad bheemunipatnam...

Municipalities - Andhra Pradesh

32789413 providing shrub plantation at r.t.c bus stand to appolo circle, 0.75 m 0.9 m wide central median plantation with 1 year maintenance at kasapuram road and painting , wall art 0.9 m wide central median guntakal, anantapur district andhra pradesh under general funds...

Rashtriya Ispat Nigam Limited - Andhra Pradesh

32745267 technological assistance, housekeeping and mechanical maintenance jobs for service water equipment in bf pump houses 1 510003995 technological desludging of cold water basin in one cell of the cooling tower. 2 510003996 technological cleaning of heat exchanger. 3 510003997 technological cleaning of internals of auto back wash filters. 4 510003998 preventive routine maintenance of eot cranes / electric hoists 5 510003999 replacement / repair of wire ropes / brake shoes or disc of eot cranes / electric hoists. 6 510004000 preventive routine maintenance of pump / blower with connected equipments. 7 510004001 alignment of motor with mechanical equipment for lt drive equipments 8 510004002 repair of multistage pump 9 510004003 replacement of damaged or defective rotor assembly of a single stage ht pump. 10 510004004 replacement of complete ht pump ( single stage or multistage ) 11 510004005 replacement of base frame of the ht pump motor. 12 510004006 in situ strengthening of base frame of ht motor / pump. 13 510004007 decoupling and coupling of ht motor and mechanical equipment. 14 510004008 replacement of damaged or defective rotor assembly of a single stage lt pump. 15 510004009 replacement of complete lt pump ( single stage or multi stage ) 16 510004010 replacement of base frame of the lt pump motor. 17 510004011 insitu strengthening of base frame of lt pump. 18 510004012 decoupling and coupling of lt motor and mechanical equipment. 19 510004013 replacement / installation of portable electrical submersible dewatering pump. 20 510004014 mechanical repair of portable electric submersible dewatering pump. 21 510004015 replacement of gate valve / butter flyvalve / nrv / pneumatic actuator of size:50 mm 150 mm. replacement of gate valve / butterfly valve / non return valve / pneumatic actuator of size:above 150 mm and upto 450 mm replacement of gate valve / butterfly valve / non return valve / pneumatic actuator of size:above 450 mm repair of gate valve / bf valve / non return valve / pneumatic actuator of size:from 50 mm to 150 mm. repair of gate valve / bf valve / non return valve / pneumatic actuator of size:above 150 and upto 450 mm repair of gate valve / bf valve / non return valve / pneumatic actuator of size:above 450 preventive maintenance of cooling tower mechanical equipments repair / replacement of cooling tower fan mechanical equipment above 45 kw repair / replacement of cooling tower fan mechanical equipments up to 45 kw repair / replacement of back wash filter blower condition monitoring of rotating equipments technological cleaning of nozzles in one cell of cooling tower thickness measurement of pipes at specified location. cleaning of drinking water tank located at m height on eoht cooling tower outlet channel screen cleaning replacement of filter media in one vessel of side stream filter fabrication and erection of ms / gi pipes with pipe fittings, valves of size:from dn 15 to dn fabrication and erection of ms / gi pipes with pipe fittings, valves of size:from dn 32 to dn fabrication and erection of ms / gi pipes with pipe fittings, valves of size:dn 50 to dn 65 fabrication and erection of ms / gi pipes with pipe fittings, valves of size:dn 80 fabrication and erection of ms / gi pipes with pipe fittings, valves of size:from dn 100 to dn fabrication and erection of ms / gi pipes with pipe fittings, valves of size:dn 150 fabrication and erection of ms / gi pipes with pipe fittings, valves of size:dn 200fabrication and erection of ms pipes with pipe fittings, valves of size:above 200 mm. fabrication of bend / tee / flanged pipe piece / dummy flange / reducer / bell mouth of size:up to 150 mm fabrication of bend / tee / flanged pipe piece / dummy flange / reducer / bell mouth of size:above 150 mm up to 250 mm fabrication of bend / tee / flanged pipe piece / dummy flange / reducer / bell mouth of size:above 250 mm up to 400 mm fabrication of bend / tee / flanged pipe piece / dummy flange / reducer / bell mouth of size:above 400 mm up to 600 mm fabrication and erection of structures dismantling and removal of pipes, valves, fittings, etc. cleaning of valve pits of size:approx. 1mx1mx1m cleaning of back wash water tank ( tk 09 ) of size:approx. 10mx6mx6m cleaning of gravity pipe from ct 10 to tk 09 tank upkeep of technological equipments of main pump house upkeep of technological equipments of soft water pump house upkeep of cooling tower ct 10, 30 upkeep of dust bins cleaning light jungle including shrub, bushes etc. lettering with synthetic enamel paint of approved colour and brand upkeep of surroundings of various units of bf 3 pump house upkeep of flooring of various units of bf 3 pump house un skilled man power supply for miscellaneous jobs skilled man power supply for miscellaneous jobs deployment of supervisors for technical assistance in pump houses....

Department Of Atomic Energy - Andhra Pradesh

32687547 bids are invited for maintenance of tailing pond and other miscellaneous works 1 item1 supply and transport of earth of specified quality as per specification and drawing from the source not owned by corporation but arranged by contractor at their own cost including all taxes royalty etc and filling the same in embankment in random fill zone in layers not exceeding 250mm measured loose in proper profile to various heights above existing ground level after stripping of top soil as per specification & drawing watering of each layer in the stipulated manner as per specification and or direction of the engineer and compaction by mechanical means to acheive requuired degree of compaction as per specification disposal of exxcess of unusable mrmentaterial all complete as per drawing specification and direction of the engineer for any lead sectional measurement for compacted filling will only be paid 2 item2 supply transport filling and compacting selected clay to various height above height above existing ground level including providing key trenches layers not exceeding 150 mm measured loose in proper progile watering of each layer in the stipulated manner as per specification and or direction of the engineer and compaction by mechanical means to acheive required degree of compaction as per specification and all work complete as per direction of the engineer with clay selectivity obtained but arranged by contractor at their own cost for all lead lift taxes and royalty sectional measurment for compacted filling will only be paid 3 item3 earth work in excavation in the following types of soils for all lifts including bailing pumping out any water accumulating inside the excavation adequate protection during excavation drilling blasting and transporting the excavated spoil material after stripping of top soil as per specification to the designated area places stacking of usable and disposal of excess of unusable material all complete as per drawing specification and direction of engineer for any lead within acquired area of tailing dam & pond all soils hard and dense soils,soft rock and hard rock 4 item4 clearing and stripping the site of all permanent construction roads pipelines etc including removal of trees 50 cm or more to reach the rock bed bushes shrubs rubbish and other objectionable materials including removal and disposal of unsuitable materials such as loose rock debris top soil vegetable matter and other perishable and objectionable materials as decided by engineer with all lead and lif 5 item5 providing laying and jointing making joints leak proof etc one point five mm hdpe liner over the earth fill material inside the tailing dam slopes including anchoring as per guidelines regarding criteria for hazardous waste landfills series hazwams 17 200 01 issued by central pollution control board moef govt of india apart from cpwd and is specification or as directed by engineer in charge 6 item6 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 2 4 1 cement 2 coarse sand zone iii derived from naturalsources 4 graded stone aggregate 20 mm nominal sizederived from natural sources 7 item7 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing andreinforcement all work up to plinth level 1 cement one point five coarse sand zone iii 3 graded stone aggregate 20 mm nominal size 8 item8 steel reinforcement for rcc work includingstraightening cutting bending placing in position abinding all complete upto plinth level 9 item9 centering and shuttering including strutting, propping etc and removalof form for in foundations, footings, bases of columns etc 10 item10 in superstructure columns lintels beams plinth beams roofs etc 11 item11 random rubble masonry with hard stone in superstructure above plinth level and upto floor five level including leveling up with cement concrete 1 6 1 2 1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size at window sills ceiling level and the like cement mortar 1 6 1 cement 6 coarse sand 12 item12 neat cement punning fencing with angle iron post placed at required distance embeddedin cement concrete blocks every 15th post last but one end postand corner post shall be strutted on both sides and end post on oneside only and provided with horizontal lines and two diagonalsinterwoven with horizontal wires of barbed wire weighing nine point 38 kg per 100 m minimum between the two posts fitted and fixed with gi staples turn buckles etc complete cost of posts struts earthwork and concrete work to be paid for separately payment to bemade per metre cost of total length of barbed wire used 13 item13 with gi barbed wire 14 item14 structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete 15 item15 removal of wet dry sludge and muck from decant pond channel drain including loading transporting and unloading with in a lead of one point five km by mechanical means including cleaning by manual means if required and pushing the unloaded material in to tailing pond including cost of all machinery labour transport fuel maintenance tools and tackles complete as per directions of engineer in charge total quantity : 15275...

Greater Visakhapatnam Municipal Corporation - Andhra Pradesh

32145055 2022 hor01 cb 100 maintenance of soft landscaping works ( plantation of trees shrubs ) in central median ( 1.33kms. ) at akkayyapalem 80ft. road from maharani parlour to thatichetlapalem, side view pockets from thatichetlapalem to railway kalyana mandapam at railway station road including traffic island at railway new colony jn. kancharapalem flyover bridge potted plants, chavulamadum side view pokets in zone v area for further period of 12 months from 01 04 20 22 to 31 03 2023....

South Central Railway - Andhra Pradesh

31793661 guntakal division: guntakal: maintenance of lawns / gardens, shrubs, hedges, nursery plants, trees provided various locations under aden / sw / gtl jurisdiction for a period of 12months. ( details of minimum labour to be engaged and locations are provided in special conditions ) guntakal division: guntakal: maintenance of lawns / gardens, shrubs, hedges, nursery plants, trees provided various locations under aden / sw / gtl jurisdiction for a period of 12months. ( details of minimum labour to be engaged and locations are provided in special conditions ) , ...

Greater Visakhapatnam Municipal Corporation - Andhra Pradesh

31785098 2021 hor01 cb 343 lumbini park, mvp beach road maintenance for overall greenery i.e., lawns, shrubs hedges, trees palms for lumbini park for further period of 12 months from 01 04 2022 to 31 03 2023 in new zone iii ( new ) area....

Greater Visakhapatnam Municipal Corporation - Andhra Pradesh

31651294 2021 hor01 cb 359 maintenance of soft landscaping (trees, shrubs grass) in the service road north side median of nh 16 (2.84 kms) from padmasree hospital to sheela nagar, zone vi area for a period of one year 01.04.2022 to 31.03.2023...

Greater Visakhapatnam Municipal Corporation - Andhra Pradesh

31651283 2021 hor01 cb 360 maintenance of soft landscaping (trees, shrubs grass) in the existing service road south side median of nh 16 (2.99kms) from vasan care hospital jn. to sheela nagar vikas college in zone v area for a period of one year 01.04.2022 to 31.03.2023....

Greater Visakhapatnam Municipal Corporation - Andhra Pradesh

31625760 2021 hor01 cb 331 maintenance for overall greenery i.e., lawns, shrubs hedges, trees for west side garden pockets(14nos.) on beach road from matsyadarshini to pandurangapuram, aqua sports complex jn. to deer park near park hotel jn., including tankers for further period of 12 months from 01 04 2022 to 31 03 2023...

Greater Visakhapatnam Municipal Corporation - Andhra Pradesh

31605115 2021 hor01 cb 340 maintenance of bougainvillea flowering shrubs and other tall trees on nh 16 service road side median from urvasi jn., to rb jn., of 2.58 kms. stretch ( south side ) for a period of one year 01.04.2022 to 31.03.2023....

Greater Visakhapatnam Municipal Corporation - Andhra Pradesh

31605114 2021 hor01 cb 342 maintenance of bougainvillea flowering shrubs and other tall trees on nh 16 service road side median from rb jn. to thatichetlapalem of 4.52 kms. stretch ( north side ) for one year period from 01.04.2022 to 31.03.2023....

Greater Visakhapatnam Municipal Corporation - Andhra Pradesh

31605113 2021 hor01 cb 341 maintenance of bougainvillea flowering shrubs and other tall trees on nh 16 service road side median from thatichetlapalem to urvasi jn., of 2.05 kms. stretch ( south side ) for one year period from 01.04.2022 to 31.03.2023....

South Central Railway - Andhra Pradesh

31044010 supply of guntakal division: guntakal: maintenance of lawns / gardens, shrubs, hedges, nursery plants, trees provided various locations under aden / sw / gtl jurisdiction for a period of 12months. ( details of minimum labour to be engaged and locations are provided in special conditions ) guntakal division: guntakal: maintenance of lawns / gardens, shrubs, hedges, nursery plants, trees provided various locations under aden / sw / gtl jurisdiction for a period of 12months. ( details of minimum labour to be engaged and locations are provided in special conditions ) , ...

Ministry Of Home Affairs - Andhra Pradesh

30626708 bids are invited for site clearing site clearing: clearing and grubbing of site manually or by mechanical means including removal of debris and uprooting rank vegetation, weeds, and other wild growth by forking repeatedly, breaking clods and rough dressing, along with disposal of all rubbish and contaminated soil inside project premises (up to 2km), including all leads and lifts. , preparation of tree/palms/topairy plant pits preparation of tree/palms /topairy plant pits: make 1 meter x 1meter x 1meter pit and remove 1/3rd of the bottom soil. re fill bottom 1/3rd portion of the pit with availabe good soil and rest 2/3rd portion should be filled with potting mixture prepared by mixing six parts of excavated top soil and four parts of well decomposed farm yard manure. , preparation of pits for shrubs, creepers and hedges preparation of pits for shrubs, creepers and hedges : make 0.5 meter x 0.5 meter x 0.5 meter pit and remove 1/3rd of the bottom soil. re fill bottom 1/3rd portion of the pit with available good soil and rest 2/3rd of portion should be filled with potting mixture prepared by mixing six parts of top excavated soil and four parts of well decomposed farm yard manure. , preparation of soil for grass, ground cover, edges and flower beds preparation of soil for grass, ground cover, edges and flower beds: dig and remove all weeds, debris, rubbles, stones from 6 depth of the surface soil. then prepare the same soil with 1 thick layer of well decomposed, weed free farm yard manure or vermicompost. treat the soil with chloriphyriphos / lindane / neemcake depends upon the infestation of soil borne pests. treat the soil with proper herbicide to control the weeds only on need basis. finally level the soil as per the drawing or planting details. , planting of trees planting of trees: planting(exclude the plant cost) of trees and stacking / propping to protect the trees from wind and irrigate on need basis. maintain the tree basins free of weeds by regu...

Indian Institute Of Information Technology - Andhra Pradesh

30185622 e tender for the landscaping works with necessary tools & plants for indian institute of information technology sri city, chittoor 01 complete maintenance of lawn, shrubs, trees, jobs like making of basin at regular intervals and application of fertilizer etc., (excluding cost of fertilizer, which shall be paid separately) as per the directions of officer in charge. manpower required: semi skilled labour 3 nos. familiar with gardening works. 02 fertilizer for all trees at regular intervals 03 supply of water tanker 5kl capacity and watering the plants along the median from iiit sri city to gnan marg circle. note: application of water on alternate days and/or 15 no’s water tankers per month. amount to be paid will be regulated based on the actual number of tankers supplied in a month....

Ministry Of Defence - Andhra Pradesh

29780143 bids are invited for custom bid for services hiring of conservancy services for cutting of grass bushes shrubs sweeping cleaning of buildings and drains in nadv as per scope of work...

Indian Army - Andhra Pradesh

29695151 bids are invited for provision of topographical survey for demolition and reconstruction of flag officers married accommodation (07 dus) at dolphin hills, visakhapatnam the following works are required to provision of topographical survey for demolition and reconstruction of flag officers married accommodation (07 dus) at dolphin hills, visakhapatnam: (a) jungle clearance by cutting and removing of bushes, weeds, shrubs and plants excluding tree cuttingincluding hill and velley potation at proposed site at dolphin hills.complete all as specified 15000 sqm .(b) topographical survey with 3m grid interval and 0.5m counter intervals to provide with accurate base line information data with all existing permanent infrastructure /utilities details of proposed site atincluding reconnaissance to get broad view of entire area for planning (using total station ) complete all as specified 15000 sqm.note: the details of all report should be submitted in soft copy in cds/dvds along with 06 sets of hard copy. total quantity : 1...

South Central Railway - Andhra Pradesh

29297851 guntakal division: guntakal: maintenance of lawns / gardens, shrubs, hedges, nursery plants, trees provided various locations under aden / sw / gtl jurisdiction for a period of 12months.guntakal division: guntakal: maintenance of lawns / gardens, shrubs, hedges, nursery plants, trees provided various locations under aden / sw / gtl jurisdiction for a period of 12months., ...

Acharya N G Ranga Agricultural University - Andhra Pradesh

29089988 tender for uprooting of shrubs /bushes in field , heaping of removed shrubs /buses , clearing the uprooted bushes /shrubs from the field , preparing the land for cultivation and refilling of the land depressions caused due to uprooting at agricultural ....

Acharya Ng Ranga Agricultural University - Andhra Pradesh

29012576 uprooting of shrubs/bushes in field, heaping of removed shrubs/bushes, clearing the uprooted bushes/shrubs from the field, preparing the land for cultivation and refilling of the land depressions caused due to uprooting...