barbed wire Tenders in Andhra Pradesh

6
Military Engineer Services - Andhra Pradesh

40717800 repairs to chain link fencing barbed wire fencing, concertina coil, compound wall, retaining wall, guide walls, hand rails, foot path, hard standing, area drains, stone pitching, sports facilities and certain misc b/r works at dolphin hill area and...

Due Date : December 16, 2023

Tender Value : ₹ 74 Lakhs

View Tender
9
Military Engineer Services - Andhra Pradesh

40293828 tender for special repairs to old perimeter wall at bvy visakhapatnam; 1 excavation over areas not exceeding 1.5m deep and getting out in soft / loose soil complete all as specified and as directed.note: the contractor at his option may carryout excavation work using mechanical means wherever required without any extra cost to the department 2 excavation over areas depth exceeding 1.5m and not exceeding 3.0m and getting out in soft / loose soil complete all as specified and as directed.note: the contractor at his option may carryout excavation work using mechanical means wherever required without any extra cost to the department 3 excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting out in soft / loose soil complete all as specified and as directed. 4 m & l for crushed stone dust filling under floors or in foundations including watering and consolidation complete all as specified and as directed. 5 m & l for moorum / red bajri filling under floors or in pavings laid in layers not exceeding 15 cm thick, spread levelled and rammed / rolled including watering to required level and gradient complete all as specified and as directed. note:measurements shall be taken after consolidation of earth and 10% deduction shall be made for payments. 6 returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. note: a deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming. 7 removal of excavated material [ soil ] to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5 m complete all as specified and as directed. 8 m & l for pcc 1:4:8, type d 2, using 40mm graded stone aggregate as in foundation, fillings, mass concrete, footings etc complete all as specified and as directed. 9 m & l for pcc 1:3:6, type c 1, using 20 mm graded stone aggregate as in coping, bed plate, bond stoness, cill and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary formwork [ straight or curved ] complete all as specified and directed. 10 m & l for rcc m 30 design mix, using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed. 11 m & l for rcc m 30 design mix, using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and as directed. 12 m & l for rcc m 30 design mix, using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels etc complete all as specified and as directed. 13 demolition of brick / stone masonry built in cement mortar including all quoins arches pillars etc and removing rubbish to a distance exceeding 1.5 km but not exceeding 5.0 km complete all as specified and as directed. 14 m & l for providing precast cement concrete solid block masonry of 1:3:6, type c1 using 20mm graded stone aggregate exceeding 100mm width with plain or interlocking joints set in cement mortar 1:6 complete all as specified and as directed. 15 m & l for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, using serviceable stones obtained from demolition, built in cement mortar 1:6 complete all as specified and directed. 16 use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits [ if any ] of plinth beams and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed. sides of concrete 17 use and removal of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for rough finished surfaces of concrete complete all as specified and as directed. 18 use and removal of steel formwork to sides and soffits of floor or roof beams, beam launchings, girders, bressummers, lintels, cantilevers, shelves and similar works for rough finished surfaces of concrete complete all as specified and as directed. 19 s & f reinforcement using high strength corrosion resistant deformed tmt bars of grade fe–500d of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 20 s & f reinforcement using high strength corrosion resistant deformed tmt bars of grade fe–500d of 5mm to 10mm dia bars as in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed. 21 dismantling of mild steel or wrought iron work of any description not otherwise provided for complete all as specified and as directed. 22 s & f mild steel work conforming to fe 290, grade e 165, as in framed work such as grills, gratings, ladders etc with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work complete all as specified and as directed. 23 s & f mild steel work conforming to fe.290.gde e 165 as in framed brackets of angles or teeswith web and flanges cut toshape, drilled and countersunkfor screw, including bending andwelding angles, as necessary, gusset plates, riveting, etc. n exc10 kg each bracket 24 m & l for providing glass coping with 25mm layer of cement mortar 1:3 rendering on top of compound / security walls, with a rounded or weathered finish and firmly embedding broken glass of bottle or thick glass broken to approximately 63mm gauge and firmly embedded into cement mortar at the rate of 10 kg of glass per square metre of rendered surface, jogged edges of the glass being left projecting. 25 s & f galvanised, 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed.note: each line of wire will be measured for payment. 26 s & f in repairs concertina coil fencing with razor punched barb tape concertina coil made from high tensile spring steel, high carbon wire conforming to is – 4454 [ part – 1 ] , of grade –sm duly hot dipped galvanised, 950mm dia, 10 metre openable length, with galvanised coating and punched tape material as per is – 513, having 50 nos rounds per 6 metre length [ before stretching ] , having medium barbs [ barb length 24±1mm, pitch between two barbs 35±1mm ] , spring core wire [ 2.5 mm thick ] of high tensile strength of 165 kg / sq.mm with tape [ 0.52mm thick ] and weight 43.478 grams / metre and fixing to “y” or trapezoidal shaped angle iron brackets placed at 2.00m to 3.00m apart and with 6 / 9 horizontal rbt [ reinforced barbed tape ] wire, stud tied with gi staples and gi clips to retain horizontal, including necessary bolts and coating with px compound [ anti rust ] complete all as specified and as directed. note: horizontal barbed wire & angle iron supports shall be measured and paid separately under relevant items of schedule a. measurement shall be made for stretched length. 27 taking down cement plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance not exceeding 1.50 km complete all as specified and as directed. 28 m & l for rendering to brick / concrete surfaces, 15 mm thick in cement mortar 1:4, including finishing the top surface even and smooth without using extra cement complete all as specified and as directed. 29 m & l for providing 25mm thick pre formed bitumen impregnated fibre filler board / strip for expansion joints in concrete, conforming to is 1838, cut to size required, placed in grooves, tightly packed all as specified and as directed. 30 m & l for two coats of weather proof exterior emulsion paint [ 100% acrylic ] by using auto roller / airless sprayer over a coat of exterior primer of same manufacturer as that of paint on newly plastered walls / ceiling, pillasters, bands, borders, soffits of chajjas and projections including necessary preparation of surfaces by using vacuum based sanding machine complete all as specified and as directed.note: the contractor shall carryout exterior emulsion painting and allied works under subject work through the authorised applicator of the manufacturer only. the lowest bidder shall submit mou from manufacturer to provide technical support and trained persons for carrying out distempering through their authorised applicatorsbefore commencement of the work to ge for approval. 31 m & l for complete removal of existing treatment of any description on wallsurfaces by using vacuum based sanding machine and applying upto 1mm thick cement based wall care putty by using multipurpose mixture for proper mixing of putty and putty sprayer for application of putty on walls, pillasters, bands, borders, soffits of chajjas and projections including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applyingtwo coats of weather proof exterior emulsion paint [ 100% acrylic ] by using auto roller / airless sprayer over one coat of exterior primer on wallsurfaces complete all as specified and as directed.note: the contractor shall carryout exterior emulsion painting and allied works under subject work through the authorised applicator of the manufacturer only. the lowest bidder shall submit mou from manufacturer to provide technical support and trained persons for carrying out distempering through their authorised applicatorsbefore commencement of the work to ge for approval. 32 m & l for one coat of synthetic enamel paint on old painted steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed. 33 m & l for two coats of synthetic enamel paint over one coat of red oxide / zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed....

Due Date : November 16, 2023

Tender Value : ₹ 1.45 Crore

View Tender
10
Municipalities - Andhra Pradesh

40208899 providing of gi barbed wire fencing for old municipal quarters to gsbc canal alur road burial ground in guntakal municiplaity under general funds...

Due Date : October 30, 2023

Tender Value : ₹ 8.35 Lakhs

View Tender
15
Military Engineer Services - Andhra Pradesh

39812057 repair / replacement of area drainage, culverts, paths hard standings, fencing, compound wall, gate etc under dgnp ( v ) .; 1 demolition of cement concrete inground floors andpavings not exceeding 15 cm thickness and removing rubbish off from the premises of md land, complete all as specified and directed. 2 demolition of reinforced cement concrete n.exc 15cm thick ( below or above ) ground level and removing rubbish off from the premises of md land, complete all as specified and directed. 3 demolition of stone / boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed. 4 material & labour for cement concrete 1:4:8, type d2 ( using40mm graded crushed granite stone aggregate ) as in foundations complete all as specified and directed. 5 material & labour for precast cement concrete 1:2:4, type b 1 ( using 20 mm graded crushed granite stone aggregate ) in landings, perforated cover slabs ( for man holes, drain etc. ) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4, complete all as specified and directed. 6 material & labour for hardcore of stone boulder of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed. 7 material & labour for 100 mm thick cement concrete 1:2:4 type b 2 ( 40 mm graded crushed granite stone aggregate ) in floors / pavings complete all as specified and directed. 8 material & labour for precast cement concrete block masonry with solid blocks type c 1, 1:3:6 ( 20mm graded crushed granite stone aggregate ) exc 10cm in width and set in cement mortar 1:6, complete all as specified and directed. 9 material & labour for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6and finished the surface even and fair without using extra cement complete all as specified and directed. 10 material & labour for preparation of newly plastered surfaces and applying three coat of white wash on walls complete all as specified and directed. 11 supply & fixing of tmt bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. 12 material & labour for providing cement concrete 1:2:4, type b 1 ( 20mm graded crushed granite aggregate ) as in coping etc. complete all as specified and directed. 13 material & labour for 100 mm thick plain cement concrete 1:4:8, type d 2 ( 40 mm graded crushed granite stone aggregate ) in sub base complete all as specified and directed. 14 material & labour for 20mm thick screed bed or bedding layer in cm 1:4 for laying tile etc. complete all as specified and directed. 15 material & labour for chequered cement concrete tiles 20cmx20cmx25mm thick , set, jointed and pointed in neat cement slurry in floor complete all as specified and directed. 16 dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. 17 material & labour for sand filling for cushion bed below interlocking paver blocks complete all as specified and directed. 18 material & labour for machine pressed precast concrete interlocking paver block of any shape and size confirming to is 15658 2006 of 60 mm thickness, m 35 grade, jointed with grey cement and pigment complete all as specified and directed. 19 all as per item no 1.18 above but expect blocks. ( note: serviceable machine pressed precast concrete interlocking paver block will be obtained from item no. 1.16 above. ) 20 material & labour for providing precast cement concrete type c 1 1:3:6 ( 20mm graded crushed granite stone aggregate ) in cm 1:6 in window or door cills, lintels, bressumers, steps, quoin blocks ( for use with masonry ) , string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho rage blocks, bonders ( for stone walling ) . corbels, brackets, etc. ( of any section indicated ) , with plain fair faces, including chamfers, weatherings, throat ing etc. and setting in mortar complete with joints to match, complete all as specified and directed. 21 supply & fixing in repair galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. ( note: each line wire to be measured ) 22 supply & fixing for 4 mm diachain link fencing including line wires, any mesh, size100 x 100 mm and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. 23 supply & fixing for plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment confirm to fe 410 w ( gde e 250 ) quality a, complete all as specified and directed. 24 supply & fixing for mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets ( for securing wire mesh etc. ) including all necessary drilling, bolting , include welding or riveting, etc., and similar work conforming to fe 290 gde e 165 and also including to taking out old postsfromconcrete or earth, complete all as specified and directed. 25 material & labour for preparation of new surface of steel and ironworkof any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. 26 material & labour for preparation of old painted surface of steel and ironworkof any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 27 total in figures 28 quoted amount in words...

Due Date : October 20, 2023

Tender Value : ₹ 18 Lakhs

View Tender
16
Municipalities - Andhra Pradesh

39661090 development of pedda cheruvuat south bund for construction of compound wall, barbed wire fencing, entrance main gate in vizianagaram municipal corporation. est cost rs.39.90 lakhs....

Due Date : September 30, 2023

Tender Value : ₹ 32.92 Lakhs

View Tender
17
Municipalities - Andhra Pradesh

39657390 providing of g i barbed wire fencing for sy.no.597,604 and lp.no.1/2000 (ews) open sites in sonia gandhi colony in 4th ward in guntakal municipality under general funds...

Due Date : September 29, 2023

Tender Value : ₹ 3.73 Lakhs

View Tender
24
Forest Department - Andhra Pradesh

39395919 providing barbed wire fencing to casuarina plantation 10ha at sagarnagar inshelterbelt bheemili section of visakhapatnam range 2300 mts...

Due Date : September 14, 2023

Tender Value : ₹ 19.71 Lakhs

View Tender
27
Military Engineer Services - Andhra Pradesh

39150168 tender for 8474 repair to compound walls, drains, culverts, retaining walls, concertina coil, steels gates, chain link fencing, barbed wire fencing and other misc repair works at nstl visakhapatnam...

Due Date : September 04, 2023

Tender Value : ₹ 37.50 Lakhs

View Tender
28
Military Engineer Services - Andhra Pradesh

39130820 repair / replacement of chain link fencing, barbed wire, concertina coil, hard standing, chequered tiles and interlocking tiles at ins virbahu, iu, mmt and ins satavahana and ge office area under age b / r i of ge ( nb ) visakhapatnam...

Due Date : September 02, 2023

Tender Value : ₹ 49.90 Lakhs

View Tender
33
Archaeological Survey Of India - Andhra Pradesh

38907949 tender for mw ( maintenance ) to buddhist remains of a stupa on the hill, jaggayyapeta; 1 supply and fixing of location and direction sign boards of size 4’x3’, made with vertical posts = 2 nos 65x65x6 mm ms l angles, frame = 40x40x4mm ms l angles, board= 4mm acp sheet and letters cut and fixed in 2 layers of 3m retro high reflective radium sheet ( as per approved colour and text ) and riveting the board to the frame through ss rivets. including cost and conveyance of all materials, labour charges, cutting into required sizes, conveyance, welding, painting to the sign post and frame with two coats of synthetic enamel paint over a primary coat of red oxide , fixing the sign posts in 2 nos pcc ( 1:2:4 ) blocks of size ( 0.45x0.45x0.60m ) , gst and other applicable taxes etc. complete item of work as directed by site in charge. 2 cost, supply and installation of ms prefabricated container cabin of size 10 x 10 x 8.6 feet ( fabricating specifications bottom frame: 140 x50 mm formed ms pipe of 3mm thick. isi mark, stiffener bottom: 80x50mm &25x50 mm square pipes. isi mark, top frame: frame made of 50x50mm square pipes. isi mark, stiffener top: 50x50 mm, 25x50 mm &25 x 25 mm square pipes, side wall stiffeners: corner post shall beof 75x75 mm, 25x50 mm l angle & wall thickness of 60 mm. isi mark, paneling outside: acp sheet as per clients requirement, internal wall paneling: the paneling of side walls and roof shall be of 9 mm thick pre laminated particle board ( mdf ) & all verticallyand horizontal corners shall be neatly and smoothly finished with aluminum sections, roof outside: 1.2mm thick g.i. sheet properly sloped & water tight. isi mark, bottom flooring: on the bottom frame 18 mm thick bison panel i.e. cemented bonded fiber sheets shall be fixed by means of self taping screw &1.5mm thick pvc vinyl carpet shall be fixed on the panel. ( 100%water, termite &dimension alproof with vinyl carpet ) , aluminum sliding windows: double shutter sliding aluminum powder coated windowswith 4mm thick glass for all windows, safety grills from outside & canopy on the top of windows, main door: the door shall be of external opening type made out of the samematerial as wall panels& canopy above the door. frame work by tubular pipe of 30 x 30& the door interior shall be finished with same material matching with that of the cabin interior. door with std hardware locks & handles godrej lock, insulation: glass wool density of 32 kg / m3 with insulation for top &12mm foam on side walls, wiring: all wiring shall be concealed and shall be pvc insulated copper wires of isi quality, suitable for 240 volt, 50 hz single phase ac power supply. 2.5 mm thick cable for lighting, 5ampswitches with 3pin sockets, bulk head light above the door, 4mm thick cable for main electrical supply & with mcb protection. polycab isi mark, outside painting: all components are painted with a coat of primer & 2 coats of corrosion free paint i.e. synthetic epoxy paint, hooks: specially formed for easy lift & shift including cost, conveyance of all the materials, installation charges etc. gst and other applicable taxes etc. complete item of work as directed by site in charge. 3 earth work excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete item of work as directed by site in charge 4 laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level: 1:4:8 ( 1 cement : 4 coarse sand ( zone iii ) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources ) including laying, curing etc complete item of work as directed by site in charge 5 construction of random rubble masonry with hard stone in foundation and with : cement mortar 1:6 ( 1 cement : 6 coarse sand ) including laying, curing etc complete item of work as directed by site in charge 6 construction of coursed rubble masonry in superstructure above plinth level and upto floor five level. masonry work ( first sort ) , in cement mortar 1:6 ( 1 cement : 6 coarse sand ) including cost of materials and labour charges etc. complete item of work as directed by site in charge 7 pointing to the surfaces in cement mortar 1:2 to match with the existing pattern including cost of materials and labour charges etc. complete item of work as directed by site in charge 8 providing chain linked mesh ( diamond mesh of size 50x50mm, 8 gauge ) fencing over dwarf wall with 50x50x6mm iron angles as verticals at every 2.50m c / c fixed in the dwarf wall with 40x40x5mm l angle alround frame including fabrication charges and painting the grill with two coats of smoke grey enamel paint after applying necessary iron primer etc. complete complying with standard specification and as directed by site in charge 9 providing synthetic enamel painting in two coats to old mild steel grill and ms chain link mesh to avoid rust etc. including cost of paint, labour charges etc. complete item of work as directed by site in charge. 10 removal of existing barbed wire fencing on north side of stupa including cost of labour, all applicable taxes as directed by site in charge....

Due Date : August 21, 2023

Tender Value : ₹ 21.98 Lakhs

View Tender
38
Department Of Atomic Energy - Andhra Pradesh

38635317 bids are invited for 1 wall painting with acrylic emulsion paint having voc two coats 2 providing and applying white cement based putty of average thickness 1 mm 3 finishing walls with acrylic smooth exterior paint of required shade 4 15 mm cement plaster with mix 1 cement 6 fine sand at all heights and lead as per directions of engineer in charge 5 neat cement punning 6 providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete 7 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in two or more coats 8 providing and applying plaster of paris putty of 2 mm 9 6mm cement plaster of mix 1 cement 3 fine sand 10 providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 11 white washing with lime to give an even shade two or more coats 12 clearing and stripping the site of all permanent construction roads pipelines etc including removal of trees 13 supply and transport of earth of specified quality as per specification and drawing 14 earth work in excavation in the following types of soils for all lifts 15 providing and laying in position specified grade of reinforced cement concrete 16 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing andreinforcement all work 17 steel reinforcement for rcc work includingstraightening cutting 18 centering and shuttering including strutting propping etc and removalof form for in foundations footings bases of columns etc 19 structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting 20 providing and fixing isi marked flush door shutters conforming to is 2202 21 providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length 22 with gi barbed wire 23 providing and fixing gi chain link fabric fencing 24 removal of wet dry sludge and muck from decant pond channel drain including loading 25 removal of existing damaged glass and fixing of new glass with applying putty 26 welding by gas or electric plant including transportation of plant at site 27 removal of existing damaged doors windows iwc ewc sink or any similar carpentary plumbing and sanitary equipment 28 dismantling colour coated roofing sheets glass reinforced plastic sheets inclusive of gables 29 rectifying all defects causing leakage in pre coated iron profile roofing sheets 30 providing and fixing precoated galvanised iron profile sheets 31 providing and fixing precoated galvanised steel sheet roofing accessories 32 gutter 600 mm over all girth 33 ridges plain 500mm to 600 mm 34 demolishing rcc work by mechanical means and stockpiling at designated locations and disposal of dismantled materials 35 supplying and applying bituminous solution primer on roof and or wall surface 36 random rubble masonry with hard stone in superstructure above plinth level and upto floor five level 37 brick work with common fly ash bricks of class of approved quality 38 providing and injecting chemical emulsion for preconstructional ant termite treatment and creating chemical barrier 39 half brick masonry with non modular fly ash bricks of class designation10 40 providing and fixing white vitreous china pedestal type water closet 41 providing and fixing wash basin with ci brackets 42 providing and fixing 600x450 mm beveled edge mirror of superior glass 43 providing and fixing cp brass bib cock of approved quality conforming to is 44 providing and fixing cp brass stop cock of standard design and of approved make conforming to is 45 providing and fixing water closet squatting pan indian type wc pan with 100 mm sand cast iron p or s trap 46 providing and laying ceramic glazed floor tiles of size 300x300 mm 47 rectifying all defects causing leakage in upvc rain water pipes including pipes 48 cleaning of rain water gutters repair of joints with approved quality jointing compound 49 providing and fixing on wall face un plasticised rigid pvc swr pipes conforming to is 50 providing and placing on terrace polyethylene water storage tank of approved brand is 51 providing and fixing inposition collapsible steel shutters 52 providing and fixing ptmt pillar cock of approved quality and colour 15 mm 53 providing and laying bituminous concrete using crushed stone aggregates 54 sub base course supplying laying spreading and consolidating 125 mm thick 55 base course supplying and laying water bound macadam of 150 mm consolidated thickness 56 providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections 57 for shutters of doors windows and ventilators including providing and fixing hinges 58 providing and fixing 12 mm thick prelaminated particle board 59 providing and fixing glazing in aluminium door window ventilator shutters and partitions etc 60 with float glass panes of 4 mm thickness 61 providing and fixing brass 100mm mortise latch and dlock with 6 levers without pair of handles 62 providing and fixing aluminium handles 63 providing and fixing aluminium sliding door bolts 64 developing lawn including necessary watering safety expenses manure good earth royalty total quantity : 18048...

Due Date : August 04, 2023

Tender Value : ₹ 47.88 Lakhs

View Tender
40
Municipalities - Andhra Pradesh

38549217 maintenance of open sites by providing barbed wire fencing at maruthi nagar and adarsh nagar in 8th and 25th wards of narsapur municipality...

Due Date : July 17, 2023

Tender Value : ₹ 6.76 Lakhs

View Tender
45
Endowment Department - Andhra Pradesh

38458071 providing rcc poles with barbed wire fencing at devasthanam land survey no.159/1 at nh 16, beside of degree college (approach road right side)...

Due Date : July 10, 2023

Tender Value : ₹ 2 Lakhs

View Tender
46
Tirumala Tirupati Devasthanams - Andhra Pradesh

38340343 raising of compound wall and providing barbed wire fencing at north side of sgs college old hostel, tirupati. (reserved for individual (un employed re trenched engineers) belonging to sc,st wadderas.)...

Due Date : June 28, 2023

Tender Value : ₹ 8.18 Lakhs

View Tender
47
Municipalities - Andhra Pradesh

38274834 providing barbed wire fencing all round the lp no.128/92 in vishnupriya nagar near the national highway in 31st ward....

Due Date : June 26, 2023

Tender Value : ₹ 4.17 Lakhs

View Tender
50
Military Engineer Services - Andhra Pradesh

37797746 repairs to wall, pcc coping plastering, steel gate and painting to compound wall and repairs/replacement of concertina coil, barbed wires angle irons and fencing gate to security wall at ins kalinga unde ge(p) navy kalinga...

Due Date : June 19, 2023

Tender Value : ₹ 26.10 Lakhs

View Tender