back clamp Tenders in Andhra Pradesh

4
Andhra Pradesh Southern Power Distribution Company Limited - Andhra Pradesh

34980127 supply of various fabrication materials , 33kv v cross arm with clamp, 33kv top cleats with clamps, 11kv tapping channel x arms with clamp, 11kv v x arms with clamp, 11kv top cleats with clamps, ms back clamp for 9.1m pscc pole, lt 3 ph 5 wire x arms with clamp, lt 3 ph 4 wire x arms with clamp, single pole dtr structure arrangment for s ph dtr, pole mounting arrangment for 25 / 16kva dtrs, mounting arrangment for 11kv tilting type ab switch...

Due Date : December 22, 2022

Tender Value : ₹ Ref. Documents

View Tender
9
Southern Power Distribution Company Of Andhra Pradesh Limited - Andhra Pradesh

32941501 procurement of lt 3 phase 5 wire cross arm , lt three phase five wire cross arms made out of m.s.angle 50*50*6mm with back clamp made with m.s. flat 50*6mm as per the drawing enclosed and painted with double coat of best quality red oxide paint suitable for 9.1mtrs pscc polesweight of the each set: (6.902 +1.198kgs)total 8.10kgs....

Due Date : July 19, 2022

Tender Value : ₹ Ref. Documents

View Tender
17
Eastern Power Distribution Company Of Andhra Pradesh Limited - Andhra Pradesh

29731087 supply of 3ph energy meters allied materials and fixing of meters with allied materials to agriculture services under ysr uchita vyavasaaya vidyut padhakam in vizianagaram, visakhapatnam, east godavari and west godavari districts of apepdcl. smc ( sheet moulding compound material ( fibre glass reinforced polyester ) ) box confirming to is 13410:1992 of 800mm ( h ) x460mm ( w ) x200mm ( d ) inner dimensions with double door box with partition as per specification duly embossing ysr uchita vyavasaya vidyuth pathakam as per drawings confirming to is 13410 :1992 including all accessories of smc, bolts and nuts properly galvanized, suitable to accommodate 3 phase meters, relays, 32 amp tpn switch and 3 phase shunt capacitors with 4 holes of sufficient diameter for inlet and outlet service wires 2 component fixing boards one for meter modem and relays , other for tpn switch to fix in smc box ( set ) 3 back clamp with 50x6 mm hot dip gi flat 2 nos for 9.1 mts pole ( set ) 4 3 pole, tpn ( triple pole with neutral ) switch confirming to is 5 hot dip gi earth pipe 25 mm dia 1.5 mts long 6 gi wire no. 8swg, 0.5 kg per service 7 pvc four core 6 sqmm cable @12 meters / service ( for scs upto 7.5hp ) , no of scs:133514 pvc four core 10 sqmm cable @12 meters / service ( for scs 7.5 to12.5 hp ) , no of scs:35217 pvc four core 16 sqmm cable @12 meters / service ( for scs12.5 to 20 hp ) , no of scs:30463 3 1 / 2 x 25 sqmm lt xlpe cable @12 meters / service ( for scs above 20hp ) , no of scs:8716 8 hot dip gi flat 400mm ( 50x6mm ) suitable to fix smc box 2 nos ( 1 set ) 9 lt capacitor:1 kvar ( for scs upto 3 hp ) , no of scs:21956 lt capacitor:2 kvar ( for scs 3 to 5 hp ) , no of scs:85119 lt capacitor:3 kvar ( for scs 5 to 7.5 hp ) , no of scs:27088 lt capacitor:4 kvar ( for scs 7.5 to 10 hp ) , no of scs:27979 lt capacitor:5 kvar ( for scs 10 to 15 hp ) , no of scs 23818 lt capacitor:6 kvar ( for scs 15 to 20 hp ) , no of scs 13244 lt capacitor:7 kvar ( for scs above 20 hp ) , no of scs:8716 10 5 / 8 x 3 galvanised bolts & nuts and washers, 0.5 kg per service storage and transportation charges, labour for fixing of smart energy meter with relay / energy meter ( irda / bluetooth ) with modem & relay in smc box, fixing smc meter box with back clamps to pole, fixing tpn switch to smc box, fixing capacitor to smc box, wiring from over head lt line to meter box, wiring from meter box to tpn switch, wiring from tpn switch to consumer board, , excavation of pit 400x400x1500mm ) and erection of hot dip gi earth pipe, running of gi wire no. 8 from meter box and tpn switch to earth pipe and commissioning per...

Due Date : November 20, 2021

Tender Value : ₹ 369.82 Crore

View Tender
19
Anakapalle Rural Electric Co Op Society Ltd - Andhra Pradesh

29030348 supply of fabrication cross arm materials 11 kv top cleats with clamps, bolts & nuts , sφ 3 wire cross arms with suitable clamp 3φ 4 wire cross arms with suitable clamp 3φ 5 wire cross arms with suitable clamp “v” wire cross arms t – joint cross arms tapping cross arms lt side arms with stut ms back clamps ( suitable for 8.0 mts pscc poles ) ms back clamps ( suitable for 9.1 mts pscc poles ) top cleats...

Due Date : September 01, 2021

Tender Value : ₹ Ref. Documents

View Tender
25
Military Engineer Services - Andhra Pradesh

26912391 repair maintenance of electrical items cables lights etc and other installation at af stn suryalanka 2 supplying and fixing 1100 volts grade heavy duty cable pvc insulated aluminium conductor, served with inner sheathing of pvc tape and overall pvc sheathed in service connections twin core cable flat or circular stranded of size 10 sqmm including taking down old unsv service cable complete all as specified 3 supplying and fixing 1100 volts grade heavy duty cable pvc insulated aluminium conductor, served with inner sheathing of pvc tape and overall pvc sheathed in service connections twin core cable flat or circular stranded of size 16 sqmm including taking down old unsv service cable complete all as specified 4 supply and fixing xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 sq. mm 4 core including necessary arrangement for fixing on wall, roof etc by using clamps, screws, porceilane insulators etc including taking down old unservicable cable complete all as specified and directed 5 supply and fixing xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 sq. mm 4 core including necessary arrangement for fixing on wall, roof etc by using clamps, screws, porceilane insulators etc including taking down old unservicable cable complete all as specified and directed 6 supply & fixing of cable xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 25 sq. mm 4 core including necessary arrangement for fixing on wall, roof etc by using clamps, screws, porceilane insulators etc including taking down old unservicable cable complete all as specified and directed 7 supply & fixing of cable xlpe insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 sq. mm 3.5 core including necessary arrangement for fixing on wall, roof etc by using clamps, screws, porceilane insulators etc including taking down old unservicable cable complete all as specified and directed 8 excavation in trenches, in soft / loose soil not exceeding 1.5 m deep and not exceeding 1.5 m in wide for laying of cable, rcc poles / stays and struts etc and getting out including trimming sides and forming bottom surface all as specified and as directed. 9 returning, filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick each, in soft / loose soil complete all as specified. note: the back fill shall be neatly rounded / levelled over the trench to a sufficient height to allow for settlement to the required level all as specified in clause 18.56.6 ( a ) of ssr 2009 10 m & l for sand cushioning to underground cable including punning down of sand in layer complete all as specified and directed. note : punned down thickness shall be measured for payment 11 m&l for laying common burnt bricks, sub class b, of size 230 x 115 x 75 mm in trenches for cable protection complete all as specified and as directed. 12 m&l for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting complete all as specified and directed 13 s&f in replacement street light timer analog clock type 3 module with battery backup, programable for every 15 min, and connected to existing power contact for controlling complete all as specified and as directed. 14 s&f in replacement of power contactor of 3 phase, 40 amps, 4 pole, in existing street light panel and connection with bus bar / cable with copper wire complete all as specified and as directed 15 material & labour for mcb tpn in repair / replacement of 63 amp 415 v complete all as specified and as directed 16 material & labour for fixing of mccb 415 v, 16 ka, 4 pole 63 a including taking down old burn out mccb and making necessary arrangement for fixing the new one like cutting, welding, thimble of suitable size, nuts & bolts etc complete required for fixing the new one all as specified and directed 17 material & labour for fixing of mccb 415 v, 16 ka, 4 pole 125 a including taking down old burn out mccb and making necessary arrangement for fixing the new one like cutting, welding, thimble of suitable size, nuts & bolts etc complete required for fixing the new one all as specified and directed 18 material & labour for fixing of on load change over 415 v, 4 pole 63 a including taking down old burn out change over and making necessary arrangement for fixing the new one like cutting, welding, thimble of suitable size, nuts & bolts etc complete required for fixing the new one all as specified and directed 19 s&f in replacement of lt junction box outdoor, single door of size minimum 1 x 0.6 x 0.6 m ( i.e 1 m height, 0.6 mtr width and 0.6 mtr depth ) or suitble higher size made out of crca sheet of 3.15 mm thick with powder coated painting frame made out of flat iron 45 x 45 x 6 mm and four numbers of 100 amps aluminum bars duly insulated on insulators / suitable size bakelite sheet fixed horizontally including making necessary drilling on bus bars for fixing of out going cable upto 50 sqmm xlpe 05 nos with minimum gap as per ie standards and one no mccb of capacity 63 a, 4 pole, 415 v 25 ka complete ( free space between mccb / busbar and other connection items should be provided, ) including fixing arrangement on poles at the height upto 1.5 mtrs by using suitable size of iron flat bracket, nuts & bolts, danger notice sticker, cable glands, internal wiring with frls copper wires of suitable size complete all as specified and directed nnote : before placing the order the contractor should submit the drg for approval of age ( i ) 20 material and labour for revitalization of eathing pits to get desired resistance value by excavation not less than 0.6x0.6x1.5 mtrs around the earth plate shown at various location to access the condition of earth plate and filling the coal, salt in layers complete and measure the earth value after completion of re vitalization work to get desired earth result less than 5 ohms including fixing the watering pipe of 1.2 mtrs gi 10 mm and making good the earth pit chamber complete all as specified and directed 21 dismantiling / taking down led / ftl light fitting of any wattage and type street light / security lights of any capacity & description from exising lt pole / walls, at any height and refixing the fittings in existing / another location after repair work or carrying to credit complete all as specified and as directed. note ( i ) replacement of defective parts accessories shall be measured and paid separately under relevant item of sch a as supply and fix in repair. n ( ii ) transport and t & p i.e. ladder, spanners or any other equipment for repair of street light shall be provided by contractor and cost for the same deemed to be included in respective item of sch a 22 supply & fix in repair led driver of 48 watt of suitable make and model as per exisiting led 48 watt street light fitting complete all as specified and directed . n 23 supply & fix in repair led driver of 25 watt of suitable make and model as per exisiting led 25 watt street light fitting complete all as specified and directed . n 24 s&f in repair for street light brackets made of 25 mm dia g.i. pipe light grade in shape and angle as directed not exceeding 1.5 mtrs in length fixed to pole with suitable size of m.s. flat iron clamps, 2 nos, m.s nut & bolt with cup washers including dismantling old rusted / unserviceable bracket with its rusted clamps and nut bolts complete all as specified and as directed. 25 m&l for repair of xlpe cable upto 25 sqmm by disconnecting the cable from loop in loop out box, cutting the wornout insulated cable, removing the loop from the ground and re preparing the cable for thimbling by using proper tools and re connect the cable at jn box by using nuts and bolts of suitable size as existing ( street light ) and closing the box properly as previous complete all as specified and directed nnote : nuts & bolts, thimble & insulation tape required for connection and making good deemed to be included in quoted rate 26 s&f in replacement stay assembly complete with stay rod 20 mm dia accessories as shown in stay assembly electrical plate no. 1 in ssr 1 along with 02 nos loop insulators, stay clamps, including excavation , refilling, and pcc 1:3:6 complete all as specified and as directed. 27 supply & fixing of automatic street light control switch upto three phase, 5 kw using infrared sensor based nature switch for automatic switching of street lights, 3 nos. contactors, 3 nos. incoming mcbs & 3 nos. outgoing mcbs of 16 20 amps each & circuit wiring ( copper ) of min.10 sq.mm. nature switch operation should be based on natural light lux level. required illuminance level for switching on is = 30 lux and for switching off = 10 lux. the sensor should also have part night operation facility of min. 4 hrs. to max. 12 hrs. the sensor along with suitable power contactor ( s ) and incoming outgoing mcbs should be enclosed in a pole / wall mountable rust proof, electric shock proof, termite proof and fr grade smc enclosure conforming to ip54. the circuit should also have provision for manual operation ( i.e. sensor by pass option ) with necessary clamps, and connecting to existing xlpe cables complete all as specified and as directed. nmake: na ) nature switch kakatiya energy systems / bajaj / healer, nb ) mcbs & contactors bch / l&t / schneider nc ) enclosure sintex or equivalent nmodel: swadeep 02ec 5kw3p or as approved by accepting officer 28 supply and fix pvc insulated and fr pvc round sheathed, copper conductor ( flexible ) industrial cable, 3 core 1.5 sqmm 1100 volt, conforming to is 694, multistranded with rigid heavy duty pvc conduit of 20 mm dia with bends from junction box to connector of street light fitting complete all as specified and as directed. 29 supply and fix pvc insulated and fr xple round sheathed, g.i armoured, copper conductor ( flexible ) industrial cable, 3 core 2.5 sqmm 1100 volt, conforming to is 1554 part i, multistranded from junction box to connector of highmast light fitting complete all as specified and as directed. 30 supply and fixing led street light fitting with and including individual high power 45 watt led new generation energy saving and environmental friendly long life led street light made up of pressure die cast alu with secondary optics, suitable for outdoor use ip 66, connected with connecting cable complete all as specified and as directed 31 supply and fixing led street light fitting with and including individual high power 25 watt led new generation energy saving and environmental friendly long life led street light made up of pressure die cast alu with secondary optics, suitable for outdoor use ip 66, connected with connecting cable complete all as specified and as directed 32 s&f in replacement of flood light of any wattage and type with led flood light of 150 watt symetrical illumination, along with driver assembly as per oem specifications, energy saving, environmental friendly, long life, exclusive innovative die cast aluminium ip66 flood light and connecting up existing cable complete all as specified and as directed. 33 s&f in replacement of existing post light of any type and wattage with new generation, led post top light of wattage 25 watt, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power leds as light source complete and connecting up with exisitng cable complete all as specified and as directed. 34 s&f in replacement of existing loop in out junction box with non metalic pvc junction box suitable of size 350 x 250 x 150 with connector 4 way and including one mcb sp 6 a, 230v alongwith 2 nos c clamps and back clamp made up of 20x3 flat iron and fixing on pole with necessary nuts bolts, washers, 2 nos cable glands of size not exc 4 core 25 sqmm, cable lugs as required complete all as specified and as directed. 35 s&f in replacement mcb sp 6a, 10 ka, c curve complete all as specified and as directed 36 m&l for dismantling of existing acsr conductor of any size and fixing new acsr conductor of any size as directed on insulator on existing poles complete all as specified and as directed. 37 m&l for dismantling of existing pin insulator and fixing new pin insulator of 1100 voltage grade, porcelain, vitreous, brown insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia complete all as specified and as directed. 38 m&l cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint including for dismantling of exisitng cross arms on existing lt poles complete all as specified and as directed. 39 total of schedule a...

Due Date : March 09, 2021

Tender Value : ₹ Ref. Documents

View Tender
26
Eastern Power Distribution Company Of Andhra Pradesh Limited - Andhra Pradesh

25752181 fixing of 3 phase ir port energy meters to agriculture services with allied materials under ysr uchita vyavasaaya vidyut padhakam in tekkali division in srikakulam district of apepdcl“fixing of 3 phase ir port energy meters to agriculture services with allied materials. transport of material from section stores to site location, fixing of energy meter and tpn switches on the smc meter board, drilling of suitable holes for fixing of clamps etc., fixing of assembled meter boards on 8 mtrs. / 9.1 mtrs. pscc poles at an average height of 5 feet from ground level, with 2 nos. ms back clamps on top and bottom of meter board, laying of incoming cables with pvc lt single core 6 sq.mm cable ( 3 ph + 1 n ) from line to meter, meter to tpn switch, tpn switch to pole top and joint to consumer service wires with insulated binding wire duly tying at 1 / 2 mtr. intervals with insulated tapes. the required insulated binding wire and insulated tapes are to be borne by the contractor. earthing of meter board with 20 mm dia g.i. earth pipe with no.8 gi wire at pole bottom is to be done.” under ysr uchita vyavasaaya vidyut padhakam in tekkali division of srikakulam district of apepdcl...

Due Date : November 02, 2020

Tender Value : ₹ Ref. Documents

View Tender
27
Eastern Power Distribution Company Of Andhra Pradesh Limited - Andhra Pradesh

25752180 fixing of 3 phase ir port energy meters to agriculture services with allied materials under ysr uchita vyavasaaya vidyut padhakam in palakonda division in srikakulam district of apepdcl “fixing of 3 phase ir port energy meters to agriculture services with allied materials. transport of material from section stores to site location, fixing of energy meter and tpn switches on the smc meter board, drilling of suitable holes for fixing of clamps etc., fixing of assembled meter boards on 8 mtrs. / 9.1 mtrs. pscc poles at an average height of 5 feet from ground level, with 2 nos. ms back clamps on top and bottom of meter board, laying of incoming cables with pvc lt single core 6 sq.mm cable ( 3 ph + 1 n ) from line to meter, meter to tpn switch, tpn switch to pole top and joint to consumer service wires with insulated binding wire duly tying at 1 / 2 mtr. intervals with insulated tapes. the required insulated binding wire and insulated tapes are to be borne by the contractor. earthing of meter board with 20 mm dia g.i. earth pipe with no.8 gi wire at pole bottom is to be done.” under ysr uchita vyavasaaya vidyut padhakam in palakonda division of srikakulam district of apepdcl...

Due Date : November 02, 2020

Tender Value : ₹ Ref. Documents

View Tender
37
Government Of Andhra Pradesh - Andhra Pradesh

16281969 procurement of materials for fy 2018 19 ( lt 3 phase 5 wire cross arms made out of m.s.angle 50x50x6 mm with back clamp and necessary holes suitable for 9.1 mtrs pssc poles ( 280 kgs wl ) with two coats of red oxide paint ) ...

Due Date : June 28, 2018

Tender Value : ₹ 1 Lakhs

View Tender