37487432 break down and running maintenance works for aluminum sheet and insulation for ducts ( all elevations of primary air ( cold and hot ) , hotsecondary air and flue gas ) as and when required during the period from 01.04.2023 to 31.03.2024 for unit 2 boiler including tp and consumables...
37424017 break down and running maintenance works for aluminum sheet and insulation for ducts (all elevations of primary air (cold and hot), hotsecondary air and flue gas ) as and when required during the period from 01.04.2023 to 31.03.2024 for unit 2 boiler including tp and consumables...
37291607 break down and running maintenance works for aluminum sheet and insulation for ducts (all elevations of primary air (cold and hot), hotsecondary air and flue gas ) as and when required during the period from 01.04.2023 to 31.03.2024 for unit 2 boiler including tp and consumables...
37095312 break down and running maintenance works for aluminum sheet and insulation for ducts (all elevations of primary air (cold and hot), hotsecondary air and flue gas ) as and when required during the period from 01.04.2023 to 31.03.2024 for unit 2 boiler including tp and consumables...
37084381 supply of aluminium sheets for insulation works , aluminium sheet roll, aluminium sheet roll, aluminium sheet roll...
36972896 fabrication of 14 no battery boxes with 3mm thick aluminum sheet and 50x50x6mm aluminum angular (size of box is 50cmx30cmx23cm)...
36722935 fabrication of 14 no battery boxes with 3mm thick aluminum sheet and 50x50x6mm aluminum angular ( size of box is 43.5cmx20cmx27cm ) ...
36408692 bids are invited for supply of plain aluminium sheets for panki project plain alum sht 0.914 mm is737 / 19000h2as per is737 / 19000h2 total quantity : 450...
36379569 break down and running maintenance works for aluminum sheet and insulation for ducts ( all elevations of primary air ( cold and hot ) , hotsecondary air and fluegas ) as and when required during the period from 01.04.2023 to 31.03.2024 for unit 1 boiler including tp andconsumables....
36277262 supply of supply of stop disc board with engineering grade reflectice sticker red i colour for manned level crossing gates (eolb 50 nos & sliding booms 50 nos) with 2 mm thick aluminium sheet of size 600 mm dia circle with required accessories fixing to the boom as per the sketch & stop word to be in three languages hindi english telugu (approval for the details of the sketch/ details of language for lcs (eolb 50 nos & sliding booms 50 nos) to be obtained by consignee before supply).supply of stop disc board with engineering grade reflectice sticker red i colour for manned level crossing gates (eolb 50 nos & sliding booms 50 nos) with 2 mm thick aluminium sheet of size 600 mm dia circle with required accessories fixing to the boom as per the sketch & stop word to be in three languages hindi english telugu (approval for the details of the sketch/ details of language for lcs (eolb 50 nos & sliding booms 50 nos) to be obtained by consignee before supply).,supply of stop disc board with engineering grade reflectice sticker red i colour for manned level crossing gates (eolb 50 nos & sliding booms 50 nos) with 2 mm thick aluminium sheet of size 600 mm dia circle with required accessories fixing to the boom as per the sketch & stop word to be in three languages hindi english telugu (approval for the details of the sketch/ details of language for lcs (eolb 50 nos & sliding booms 50 nos) to be obtained by consignee before supply)....
34895140 bids are invited for 1 super supercera ceramic fibre blanket size 7620x610x25mm density128 kg per cubic mtr.orequavalent dgs approved materials. 2 cloth frp cloth 1mtr width x2mm thick 3 al aluminium sheet 2440mmx1220mmx24gauge 4 wire1 20g g.i.wire 5 wire2 g.i.wire 24g 6 tapping gi self tapping pan head screws 8x19 as per sample total quantity : 5020...
34807677 supply and installation of electrical items 1. aluminium sheet covers with handle & base frame 2. power distribution board with double door and free working space 1 ) 63a industrial socket with 4 pole mcb, panel mounted type 2 ) 32a industrial socket with 4 pole mcb, panel mounted type 3 ) 16a industrial socket „with 2 pole mcb , panel mounted type 4 ) 16amps modular sockets with sp mcb 3. multi pin socket ( external type ) 4. copier strip ( 25 x 3 mm ) 5. copper strip ( 25 x 6 mm ) 6. 4 inch pvc pipes ( 10 ft. ) 7. 3 inch pvc pipes ( 0 ft. ) 8. 2 inch pvc pipes ( 10 ft. ) 9. pvc elbow 4inch, 3inch & 2 inch ( each 10 nos ) 10. pvc sockets 4inch, 3inch & 2 inch ( each 10 nos ) 11. legrand myrius 6 amps switches 12. lan splitters 8 port 13. led light drivers 12watts 14. fan capacitors 2.5 mfd 15. insulation tapes ( red, yellow, blue green each 15nos ) 16. 8 modular plates legrand mylinc 17. apex ultima asian paints 20 lts 18. primer paint asian paints 10 lts 19. damp block 2k asian paints 3 kgs 20. damp proof advanced asian paints 201ts 21. vga vga cable 20 mts...
34396013 supplying, laying, fixing, applying of aluminum sheet cladding and glass cloth covering on already insulated hvac ducts chilled water pipelines at homi bhabha cancer hospital research center, visakhapatnam, andhra pradesh, 530053....
34081534 supply of aluminium sheet size 2.5 x 1220 x 2440mmaluminium sheet size 2.5 x 1220 x 2440mm, aluminium sheet size 2.5 x 1220 x 2440mm to is: 737 / 2008 designation 52000 hx6 carr. repair andhra pradesh 175.00 kg...
33890383 supplying, laying, fixing, applying of aluminum sheet cladding and glass cloth covering on hvac ducts chilled water pipelines at homi bhabha cancer hospital research center, visakhapatnam, andhra pradesh, 530053 ...
33807071 supply of aluminium sheet size 2.5 x 1220 x 2440mm to is: 737/2008 designation 52000 hx6.aluminium sheet size 2.5 x 1220 x 2440mm to is: 737/2008 designation 52000 hx6.,aluminium sheet size 2.5 x 1220 x 2440mm to is: 737/2008 designation 52000 hx6. carr. repair andhra pradesh 500.00 kg...
33574607 supply of industrial goods for industrial design workshop , aluminium sheet ( 17 guage ) 4 ft x 4 ft , aluminium sheet ( 19 guage ) 4 ft x 4 ft , metal aluminium block ( dia 1 inch x 6 inch ) , metal aluminium block ( dia 2 inch x 6 inch ) , metal brass block ( 1 inch x i inch x 6 inch ) , metal brass block ( 2 inch x 2 inch x 6 inch ) , wire gi wire 18 gauge 1 kg , wire gi wire 24 gauge 1 kg...
32900996 bids are invited for boq polythene sheet, transperent, tubular type 1mtr width, thick ness 400 to 500 micron , boq cello tapes 2 inch size , boq gi sheet 2440mmx1220mmx1mm thick , boq gi self tapping screws pan head full thread 4mm diax25mm length , boq gi c channel 50mm width x25mm height x1mm thick and 2400mm length , boq g.i.sheets size 2420mmx1220mmx3mm thick , boq aluminium sheet of size 2440mm x 1220mmx1mm thick , boq frp awning sheets 3100mmx 1000mmx3mm thickas per sample green colour , boq ss j clamps 10mm dia x175mm long with two flat washers and one bitamoneous washeras per sample , boq aluminium flat 25mmwidth x4500mm long x4mm thick total quantity : 7258...
32829322 procurement of aluminium sheet 0.91 mm for bmd / pp....
32740171 bids are invited for aluminum busbars confirming to is: 5082 size 60mm x 10mm thick, length 6 metres+ / 2 metres ( q3 ) , electrolytic grade copper flats confirming to is: 1897 size: 25 x 4mm thick, length 6 metres+ / 2 ( q3 ) , electrolytic grade copper flats confirming to is: 1897 size: 30 x 5mm thick, length 6 metres+ / 2 ( q3 ) , electrolytic grade copper flats confirming to is: 1897 size: 50 x 6mm thick, length 6 metres+ / 2 ( q3 ) , electrolytic grade copper flats confirming to is: 1897 size: 40 x 4mm thick, length 6 metres+ / 2 ( q3 ) , electrolytic grade copper flats confirming to is: 1897 size: 40 x 5mm thick; length 6 metres+ / 2 ( q3 ) , electrolytic grade copper flats confirming to is: 1897 size: 60 x 4mm thick; length 6 metres+ / 2 ( q3 ) , electrolytic grade copper flats confirming to is: 1897 size: 100 x 8mm thick; length 6 metres+ / 2 ( q3 ) , aluminium sheet, is: 737, 99% purity type designation eic, 1 x 0.4 mtr, tolerance on sides+ / ( q3 ) , brass rod, round, cuzn 42, pb3, rolled extruded and drawn as per is 319, tolerance on dimensio ( q3 ) , brass rod, round, cuzn 42, pb3, rolled extruded and drawn as per is: 319, tolerance on dimens ( q3 ) , brass rod, round, cuzn 42, pb3, rolled extruded and drawn as per is: 319, tolerance on dimensi ( q3 ) , brass rod, round, cuzn 42, pb3, rolled extruded and drawn as per is: 319, tolerance on dimension ( q3 ) , brass rod, round rolled extruded and drawn grade 1 as per is: 319, tolerance on dimensions as pe ( q3 ) , brass sheet cuzn 37, annealed, as per is: 410, size: 1 x 0.4 mtr, tolerance on sides+ / 25mm ( q3 ) , copper rod 99.5% purity, 15mm dia, 2 mtr length ( q3 ) , copper rod, size: dia: 25 mm, length: 1 mtr, etp grade as per is: 191, tolerance dimension as ( q3 ) , copper rod, etp grade as per is: 191 and tolerance on dimension as per is: 2826, 0.5 mtr, size: 50 ( q3 auto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. ( for anunlimited time ) total quantity : 2109...
32707001 supply of supply of retro reflective termination indication t/p boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safarisupply of retro reflective termination indication t/p boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safari,supply of retro reflective termination indication t/p boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safari...
32706962 supply of supply of retro reflective whistle board w/l in english. as per drawing enclosed. board should be made with 2mm thick aluminium sheet with 25x25x3mm m s angle frame and sticker should be 3m or avery dennison or safari only.supply of retro reflective whistle board w/l in english. as per drawing enclosed. board should be made with 2mm thick aluminium sheet with 25x25x3mm m s angle frame and sticker should be 3m or avery dennison or safari only.,supply of retro reflective whistle board w/l in english. as per drawing enclosed. board should be made with 2mm thick aluminium sheet with 25x25x3mm m s angle frame and sticker should be 3m or avery dennison or safari only....
32706947 supply of supply of retro reflective single and double strip lc warning boards as per standards size 900mm equilateral and 2mm thick aluminium sheet and 900x300x2mm thick aluminium definition board along with back support of 25x25x3mm angle with bolts and nuts . sticker should be made of 3m or avery dennison or safari . note: 80nos double strip and 80nos single stripsupply of retro reflective single and double strip lc warning boards as per standards size 900mm equilateral and 2mm thick aluminium sheet and 900x300x2mm thick aluminium definition board along with back support of 25x25x3mm angle with bolts and nuts . sticker should be made of 3m or avery dennison or safari . note: 80nos double strip and 80nos single strip,supply of retro reflective single and double strip lc warning boards as per standards size 900mm equilateral and 2mm thick aluminium sheet and 900x300x2mm thick aluminium definition board along with back support of 25x25x3mm angle with bolts and nuts . sticker should be made of 3m or avery dennison or safari . note: 80nos double strip and 80nos single strip...
32706678 supply of supply of retro reflective whistle board w/l in hindi . as per drg. enclosed . board should be made with 2mm thick aluminium sheet with 25x25x3mm m s angle frame and sticker should be 3m or avery dennison or safari only.supply of retro reflective whistle board w/l in hindi . as per drg. enclosed . board should be made with 2mm thick aluminium sheet with 25x25x3mm m s angle frame and sticker should be 3m or avery dennison or safari only.,supply of retro reflective whistle board w/l in hindi . as per drg. enclosed . board should be made with 2mm thick aluminium sheet with 25x25x3mm m s angle frame and sticker should be 3m or avery dennison or safari only....
32706544 supply of supply of retro reflective caution indicator boards of size 1400x400x2mm thick aluminum sheet along with back support ms angle of size 25x25x3mm with bolts and nuts as per standard drawing note: sticker should be made of 3m or avery dennison or safarisupply of retro reflective caution indicator boards of size 1400x400x2mm thick aluminum sheet along with back support ms angle of size 25x25x3mm with bolts and nuts as per standard drawing note: sticker should be made of 3m or avery dennison or safari,supply of retro reflective caution indicator boards of size 1400x400x2mm thick aluminum sheet along with back support ms angle of size 25x25x3mm with bolts and nuts as per standard drawing note: sticker should be made of 3m or avery dennison or safari...
32706531 supply of supply of retro reflective speed breaker boards made with 2mm thick aluminium sheet of size 900mm triangle with definition plate 600x200mm with back side angular frame fixing with board with bolts and nuts. sticker should be 3m or avery or safari as per drawing enclosed.supply of retro reflective speed breaker boards made with 2mm thick aluminium sheet of size 900mm triangle with definition plate 600x200mm with back side angular frame fixing with board with bolts and nuts. sticker should be 3m or avery or safari as per drawing enclosed.,supply of retro reflective speed breaker boards made with 2mm thick aluminium sheet of size 900mm triangle with definition plate 600x200mm with back side angular frame fixing with board with bolts and nuts. sticker should be 3m or avery or safari as per drawing enclosed....
32706496 supply of supply of retro reflective speed limit warning boards as per standards of size 1 meter equilateral triangle with 2mm alluminium sheet with suitable ms frame 25x25x3mm with bolts and nuts, sticker should be made of 3m or avery dennison or safari. note: 20kmph 36 nos, 30kmph 48 nos, 50kmph: 38 nos. 70kmph: 4 nos, 75kmph: 28 nos., 80kmph: 10nos. 90kmph: 21nos., 95kmph : 04 nos., 100kmph: 22 nos., 105kmph: 16 nos. total : 227 nos.supply of retro reflective speed limit warning boards as per standards of size 1 meter equilateral triangle with 2mm alluminium sheet with suitable ms frame 25x25x3mm with bolts and nuts, sticker should be made of 3m or avery dennison or safari. note: 20kmph 36 nos, 30kmph 48 nos, 50kmph: 38 nos. 70kmph: 4 nos, 75kmph: 28 nos., 80kmph: 10nos. 90kmph: 21nos., 95kmph : 04 nos., 100kmph: 22 nos., 105kmph: 16 nos. total : 227 nos.,supply of retro reflective speed limit warning boards as per standards of size 1 meter equilateral triangle with 2mm alluminium sheet with suitable ms frame 25x25x3mm with bolts and nuts, sticker should be made of 3m or avery dennison or safari. note: 20kmph 36 nos, 30kmph 48 nos, 50kmph: 38 nos. 70kmph: 4 nos, 75kmph: 28 nos., 80kmph: 10nos. 90kmph: 21nos., 95kmph : 04 nos., 100kmph: 22 nos., 105kmph: 16 nos. total : 227 nos....
32706428 supply of supply of retro reflective termination indication t/loop boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safarisupply of retro reflective termination indication t/loop boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safari,supply of retro reflective termination indication t/loop boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safari...
32688961 supply of manned level crossing gate warning boards size 450 x400mm with 2mm aluminum sheet along with ms angular fixing arrangement with bolt and nuts as per drawing enclosed. note: sticker should be made of 3m or avery dennison or safari .manned level crossing gate warning boards size 450 x400mm with 2mm aluminum sheet along with ms angular fixing arrangement with bolt and nuts as per drawing enclosed. note: sticker should be made of 3m or avery dennison or safari .,manned level crossing gate warning boards size 450 x400mm with 2mm aluminum sheet along with ms angular fixing arrangement with bolt and nuts as per drawing enclosed. note: sticker should be made of 3m or avery dennison or safari ....
32688628 supply of supply of retro reflective termination indication t/g boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safarisupply of retro reflective termination indication t/g boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safari,supply of retro reflective termination indication t/g boards as per standards size. board should be made with 2mm thick aluminum sheet with 25x25x3mm ms angle back support frame with bolts and nuts. sticker should be 3m or avery dennison or safari...
32409607 supply of plain aluminum sheet required for all ducts of unit i and ii boilers for the year of 2022 23 , plain aluminium sheet,thickness: 1.00 mm,width: 1.22 mtrs,length:rolling type, is 737: 2008, grade 19000/h2...
32118609 bids are invited for 2 mm thick aluminium sheet...
31988268 supply of aluminium sheets for insulation works , aluminium sheet, aluminium sheets...
31829171 break down and running maintenance works for aluminum sheet and insulation for ducts (all elevations of primary air (cold and hot), hot secondary air and flue gas ) as and when required during the period from 01.04.2022 to 31.03.2023 for unit 1 boiler including tp and consumables...
31605012 break down and running maintenance works for aluminum sheet and insulation for ducts ( all elevations of primary air ( cold and hot ) , hot secondary air and fluegas ) as and when required during the period from 01.04.2022 to 31.03.2023 for unit 2 boiler including tp and consumables...
31592954 supply of supply of retro reflective whistle board w/l hindi 40nos, and english 40nos. drg.enclosed. note:1)boards should be made with 2mm thick aluminium sheet with 25*25*3mm ms angle frame . 2) sticker should be 3m or a very dennison company or safari only. note: sample to be submitted for consignee approval before making bulk supply.supply of retro reflective whistle board w/l hindi 40nos, and english 40nos. drg.enclosed. note:1)boards should be made with 2mm thick aluminium sheet with 25*25*3mm ms angle frame . 2) sticker should be 3m or a very dennison company or safari only. note: sample to be submitted for consignee approval before making bulk supply.,supply of retro reflective whistle board w/l hindi 40nos, and english 40nos. drg.enclosed. note:1)boards should be made with 2mm thick aluminium sheet with 25*25*3mm ms angle frame . 2) sticker should be 3m or a very dennison company or safari only. note: sample to be submitted for consignee approval before making bulk supply....
31571681 bids are invited for aluminum sheets and rod...
31420608 supply of set of items for boardsset of items for boards,supply and fitment of 2 no.s of depot layout board. 1. high quality unbreakable board made out of 1mm thickness aluminium sheet on both side 2mm high density rubber in between aluminium sheet and lettering to be done with high quality ecosolvent sticker and lamination. 2. 2 nos of one inch ms square pipe of 2mm thickness of size twelve inches to be used for inner frame. 3. 5 no.s of one inch ms square pipe of 2mm thickness of size four inches to be used for inner frame. 4. 2 no.s of two inch ms square pipe of 3mm thickness of size 8 feet. 5. 4 no.s of 8x8 inches ms square plate with 4 holes of 8mm size to be fixed with suitable bolt and nuts. complete work to be done as per the advise of consignee , supply, pasting and fitment of items to name board made out of high quality. 1. removal and refixing of black painted 1 inch 18 guage ms channel square pipe supported to name board. 2. complete board is to be pasted with printed ecosolvent sticker with lamination and printing to be done in two (or) three languages in name board. the work includes with removal of boards, fixing , pasting and refixing to original locations as per the advise of consignee. , supply, removal, pasting of stickers to the ward indication boards and refitment of ward indication board at original locations or at required locations as advised by consignee. requirements is sticker made out of high quality with 0.5mm thickness. sticker is to be printed with eco solvent sticker and lamination. printing to be done as per consignee advise. (two or three languages) complete work to be done as per the advise of consignee. the work is including supply, removal, pasting and fitment , supply and fitment slogan boards of 8 x 18 inches. no smoking boards of high quality unbreakable made out of 1mm thickness aluminium sheet on both sides, 2mm density rubber in between aluminium sheet with ecosolvent printing with lamination. (two or three languages). comp...
31348138 procurement of aluminium sheet 0.91 mm for bmd/pp....
31347514 procurement of aluminium sheet 0.91 mm for bmd / pp. procurement of aluminium sheet 0.91 mm for bmd / pp. , sh al is:737:40800 h2:0.91mm => limited...
31319214 supply of supply of retro reflective termination indication( t/loop 10nos ) boards as per standards. note: boards required along with ms angle and bolts and nuts. note: (1) boards should be made with 2mm thick aluminum sheet with 25 x 25 x 3mm ms angle frame. (2) sticker should be 3m or avery dennison or safari company only.supply of retro reflective termination indication( t/loop 10nos ) boards as per standards. note: boards required along with ms angle and bolts and nuts. note: (1) boards should be made with 2mm thick aluminum sheet with 25 x 25 x 3mm ms angle frame. (2) sticker should be 3m or avery dennison or safari company only.,supply of retro reflective termination indication( t/loop 10nos ) boards as per standards. note: boards required along with ms angle and bolts and nuts. note: (1) boards should be made with 2mm thick aluminum sheet with 25 x 25 x 3mm ms angle frame. (2) sticker should be 3m or avery dennison or safari company only....
31319185 supply of caution indication boards as per standard drawing made of retro reflective high density grade sheet on size 1400 mm x 400mmx2mm thick aluminum sheet along with back supported frame of 25mm x 25mm x 3mm ms angle note: sticker should be made of 3m or avery dennison or safari.caution indication boards as per standard drawing made of retro reflective high density grade sheet on size 1400 mm x 400mmx2mm thick aluminum sheet along with back supported frame of 25mm x 25mm x 3mm ms angle note: sticker should be made of 3m or avery dennison or safari.,caution indication boards as per standard drawing made of retro reflective high density grade sheet on size 1400 mm x 400mmx2mm thick aluminum sheet along with back supported frame of 25mm x 25mm x 3mm ms angle note: sticker should be made of 3m or avery dennison or safari....
31319064 supply of supply of retro reflective speed limit warning speed warning boards as per standard in equilateral aluminum sheet along with back supported aluminum frame, total 50nos, 10kmph 03nos, 15kmph 08nos,30kmph 19nos,50kmph 10nos, 75kmph 10nos, boards as per standards as per drawing enclosedsupply of retro reflective speed limit warning speed warning boards as per standard in equilateral aluminum sheet along with back supported aluminum frame, total 50nos, 10kmph 03nos, 15kmph 08nos,30kmph 19nos,50kmph 10nos, 75kmph 10nos, boards as per standards as per drawing enclosed,supply of retro reflective speed limit warning speed warning boards as per standard in equilateral aluminum sheet along with back supported aluminum frame, total 50nos, 10kmph 03nos, 15kmph 08nos,30kmph 19nos,50kmph 10nos, 75kmph 10nos, boards as per standards as per drawing enclosed...
31318768 supply of supply of retro reflective double strip lc second warning boards as per standards. size 900mm x 2mm equilateral aluminum sheet and 900mmx300x2mm thick aluminum definition board along with back supported frame of 25mm x 25mm x 3mm ms angle with bolts and nuts. note: sticker should be made of 3m or avery dennison or safarisupply of retro reflective double strip lc second warning boards as per standards. size 900mm x 2mm equilateral aluminum sheet and 900mmx300x2mm thick aluminum definition board along with back supported frame of 25mm x 25mm x 3mm ms angle with bolts and nuts. note: sticker should be made of 3m or avery dennison or safari,supply of retro reflective double strip lc second warning boards as per standards. size 900mm x 2mm equilateral aluminum sheet and 900mmx300x2mm thick aluminum definition board along with back supported frame of 25mm x 25mm x 3mm ms angle with bolts and nuts. note: sticker should be made of 3m or avery dennison or safari...
31206952 bids are invited for aluminium busbars confirming to is: 5082 size 60mm x 10mm thick, length 6 metres+ / 2 metres (q3) , electrolytic grade copper flats confirming to is: 1897 size: 25 x 4mm thick, length 6 metres+ / 2 (q3) , electrolytic grade copper flats confirming to is: 1897 size: 30 x 5mm thick, length 6 metres+ / 2 (q3) , electrolytic grade copper flats confirming to is: 1897 size: 50 x 6mm thick, length 6 metres+ / 2 (q3) , electrolytic grade copper flats confirming to is: 1897 size: 40 x 4mm thick, length 6 metres+ / 2 (q3) , electrolytic grade copper flats confirming to is: 1897 size: 40 x 5mm thick; length 6 metres+ / 2 (q3) , electrolytic grade copper flats confirming to is: 1897 size: 60 x 4mm thick; length 6 metres+ / 2 (q3) , electrolytic grade copper flats confirming to is: 1897 size: 100 x 8mm thick; length 6 metres+ / 2 (q3) , aluminium sheet, is: 737, 99% purity type designation eic, 1 x 0.4 mtr, tolerance on sides+ / (q3) , brass rod, round, cuzn 42, pb3, rolled extruded anddrawn as per is 319, tolerance on dimensio (q3) ,brass rod, round, cuzn 42, pb3, rolled extrudedand drawn as per is: 319, tolerance on dimens (q3) ,brass rod, round, cuzn 42, pb3, rolled extrudedand drawn as per is: 319, tolerance on dimensi (q3) ,brass rod, round, cuzn 42, pb3, rolled extrudedand drawn as per is: 319, tolerance on dimension(q3) , brass rod, round rolled extruded and drawngrade 1 as per is: 319, tolerance on dimensions aspe (q3) , brass sheet cuzn 37, annealed, as per is:410, size: 1 x 0.4 mtr, tolerance on sides+ / 25mm(q3) , copper rod 99.5% purity, 15mm dia, 2 mtrlength (q3) , copper rod, size: dia: 25 mm, length: 1mtr, etp grade as per is: 191, tolerance dimensionas (q3) , copper rod, etp grade as per is: 191 andtolerance on dimension as per is: 2826, 0.5 mtr, size:50 (q3)1 / 32 total quantity : 2109...
31196084 bids are invited for relaying of urc store roof with aluminum sheets area 32 ft by 23 ftboq title boq boqmse exemption for turnover yesstartup total quantity : 1...
31160417 bids are invited for rnd11as00060 , rnd11as00070 , rnd11ap00010 , rnd11as00150 , rnd11ar00050 , rnd11ar00060 , rnd11ar00030 , rnd11ar00040 , rnd11at00010 ,rnd11at00020boq title aluminium sheets plates rounds and tubemse total quantity : 14240...
31137456 supply of supply of road warning boards for single strip for manned level crossing gates with alluminium sheet of size with 900mm equilateral triangle shape and 300mm x 900mm rectangle boards of high retro reflective film of thickness 0.25 0.30mm pressure sensitive with minimum reflective of 170 of the color along with back support of ms angle frame of size 25 x 25 x 3mm., as per standard sketch enclosed.supply of road warning boards for single strip for manned level crossing gates with alluminium sheet of size with 900mm equilateral triangle shape and 300mm x 900mm rectangle boards of high retro reflective film of thickness 0.25 0.30mm pressure sensitive with minimum reflective of 170 of the color along with back support of ms angle frame of size 25 x 25 x 3mm., as per standard sketch enclosed.,supply of road warning boards for single strip for manned level crossing gates with alluminium sheet of size with 900mm equilateral triangle shape and 300mm x 900mm rectangle boards of high retro reflective film of thickness 0.25 0.30mm pressure sensitive with minimum reflective of 170 of the color along with back support of ms angle frame of size 25 x 25 x 3mm., as per standard sketch enclosed....
31094310 supply of supply of road warning boards for double strip for manned level crossing gates with alluminium sheet of size with 900mm equilateral triangle shape and 300mm x 900mm rectangle boards of high retro reflective film of thickness 0.25 0.30mm pressure sensitive with minimum reflective of 170 of the color along with back support of ms angle frame of size 25 x 25 x 3mm., as per standard sketch enclosed. note: sticker should be made of 3m or avery dennison or safari.supply of road warning boards for double strip for manned level crossing gates with alluminium sheet of size with 900mm equilateral triangle shape and 300mm x 900mm rectangle boards of high retro reflective film of thickness 0.25 0.30mm pressure sensitive with minimum reflective of 170 of the color along with back support of ms angle frame of size 25 x 25 x 3mm., as per standard sketch enclosed. note: sticker should be made of 3m or avery dennison or safari.,supply of road warning boards for double strip for manned level crossing gates with alluminium sheet of size with 900mm equilateral triangle shape and 300mm x 900mm rectangle boards of high retro reflective film of thickness 0.25 0.30mm pressure sensitive with minimum reflective of 170 of the color along with back support of ms angle frame of size 25 x 25 x 3mm., as per standard sketch enclosed. note: sticker should be made of 3m or avery dennison or safari....
31064409 supply of termination indicatortermination indicator,termination indicator board for passenger trains as per annexure 8/4 para 807&808 of irpwm 2004 of size 1000mm dia each made out of 2mm thick aluminium sheet covered with high intensity grade retro reflective sheet/film of 0.25mm or 0.30mm thickness of required colour and pressure sensitive bonded on to the surface.(diagram enclosed)...