Tirumala Tirupati Devasthanams - Andhra Pradesh

39751588 providing wall paneling, false ceiling, furniture, electrification and air conditioning to the existing auditorium in 3rd floor of spmc w in the premises of svims tirupati , providing and supplying optra acoustical wall panelling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for fire reaction class a as per astm e 84, fabric with an option of colors as per tender document as an attachment ( part a civil ) , providing and fixing of forbo flotex color / linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per sqm, fire test en 13501, appearance retention hexapod iso 140 8, friction slip resistance test en 14041 class ds, sanitized anti microbial treatment with resilient waterproof backing as per tender document as an attachment ( part a civil ) , providing and fixing of mineral fibre acoustical suspended ceiling system with 19mm thick microlook 90 edge tiles with 15mm face exposed grid. as per tender document as an attachment ( part a civil ) , non combustible heradesign wood wool superfine a2 acoustic ceiling system 600 x 1200 x 25 mm as per tender document as an attachment ( part a civil ) , supply and fixing of seats with the following specifications ( godrej make ) 1 ) seat / back the seat sub assembly is made up of 1.2 plus or minus 0.1 cm. thk ply wood, upholstered with polyester fabric over moulded foam and covered with an injection moulded polypropylene outer cover. as per tender document as an attachment ( part a civil ) , front overhead speakers, brand: ev, model no: ekx 12 specifications: sitc 12inches1400 w ( peak ) , 131 db peak spl, 90degrees x 60degrees pattern for best coverage on mid size stages. 40degrees monitor angle frequency, range ( 10 db ) 55 hz 20 khz ( full space measurement ) as per tender document as an attachment ( part b pa system ) , subwoofer brand: ev model no: ekx 18s specifications: sitc 18inches 1600 w ( peak ) , 134 db peak spl, frequency range ( 10 db ) 35 hz 300khz ( half space frequency response ( 3 db ) 50 hz 100hz ( half space measurement ) speaker type subwoofer as per tender document as an attachment ( part b pa system ) , power amplifier brand: dynacord model no. l3600fd specifications:sitc live 2 x 1800 w with inbuilt dsp compete with fir filters, audio limiters, output delay per channel, 31 band geq per channel, peq per channel, load impedance and having pc remote control option as per tender document as an attachment ( part b pa system ) , powered stage monitors brand: ev model no. ekx 12p specifications: sitc 12inches powered loud speaker, smart dsp features best frequency response ( 3 db ) 60 hz 18 khz1 frequency range ( 10 db ) 50 hz 20 khz1 maximum spl 132 db2, coverage ( h x v ) 90inches x 60inches power rating 1500 w as per tender document as an attachment ( part b pa system ) , music source usb / sd / mp3 player with fm tuner brand: bosch model no. ple sdt specifications:mp3 playback from sd card and usb inputs plena easy line sd tuner bgm source as per tender document as an attachment ( part b pa system ) , corded vocal microphone brand:ev model no. pl24s specifications:sitc of corded vocal microphone with dynamic neodymium magnet microphone element, with frequency response 80hz 16khz, super cardioid polar pattern, sensitivity of 2.2mv / pa and output impedance 600 ohm. must have on / off switch. as per tender document as an attachment ( part b pa system ) , corded instrument microphone brand: ev model no. pl37 specifications:sitc of corded instrument microphone with self biased condenser microphone element, with frequency response of 55hz 16khz , cardioid polar pattern, sensitivity of 5.5mv / pa, rated impedance of 200 ohm, maximum spl :130db spl and dynamic range 107db as per tender document as an attachment ( part b pa system ) , wireless handheld microphone brand ev model no r300hd specifications designed for the entry level professional, the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , wireless lepel microphone brand: ev model no. r300 l specifications designed for the entrylevel professional, the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , wireless head worn microphone brand ev model no r300e specifications designed for the entry level professional the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , gooseneck microphone brand: ev model no. re90p 18 specifications: sitc of freestanding gooseneck mic with base for podium having back electret condenser microphone element, hyper cardioid polar pattern, led status display as per tender document as an attachment ( part b pa system ) , speaker mountings suitable to the speakers specifications: sitc of fabricated speaker mounts as per tender document as an attachment ( part b pa system ) , mike table stand specifications: sitc mike table stand as per tender document as an attachment ( part b pa system ) , microphone desk stands specifications: sitc microphone desk stands as per tender document as an attachment ( part b pa system ) , microphone floor stands brand: ev specifications: microphone floor stands as per tender document as an attachment ( part b pa system ) , mixer brand: sound craft model no. signature 16 specifications: sitc 16 channel mixing console as per tender document as an attachment ( part b pa system ) , microphone cable brand: belden specifications: sitc of 2 core shielded microphone cable. as per tender document as an attachment ( part b pa system ) , speaker cable brand: finolex specifications: sitc of 2 core 2.5 sqm speaker cable as per tender document as an attachment ( part b pa system ) , equipment rack brand: d link / netrack / netfox model no. 24u specifications: sitc of 24 u equipment rack as per tender document as an attachment ( part b pa system ) , audio recorder brand: sony specifications: audio recorder as per tender document as an attachment ( part b pa system ) , connectors brand: neutrik specifications: sitc of xlr / phono socket / rca / p38 / ep connectors as per tender document as an attachment ( part b pa system ) , premium quality led parcan light with latest rdm technology for user friendly operation with below specifications: light source : single cob led source as per tender document as an attachment ( part c electrical lighting work ) , premium quality led blinder effect light with latest rdm technology for user friendly operation with below specifications: light source : quad led cob source as per tender document as an attachment ( part c electrical lighting work ) , premium quality led par light with latest rdm technology for user friendly operation with below specifications: base color rgbw color mixing, led configuration: multiple nos individual rgbw led configuration, power cable: 3 core 1 sq.mm. copper pvc insulated as per tender document as an attachment ( part c electrical lighting work ) , premium quality led profile spot light with latest rdm technology for user friendly operation with below specifications: light source : single led cob source as per tender document as an attachment ( part c electrical lighting work ) , 150w led beam, spot, wash moving light with rdm protocol and hi grade plastic body black color with following specifications led : 150w as per tender document as an attachment ( part c electrical lighting work ) , ce certified 300w led follow spot light 3200k with rdm / dmx protocol and die cast body duly epoxy polyester powder coated in black matt texture finish with following specifications led : 300w cob led source as per tender document as an attachment ( part c electrical lighting work ) , die cast aluminium c clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications. lock ms threaded galvanized lock key as per tender document as an attachment ( part c electrical lighting work ) , safety bond with lock clip 1.5 mtr long made with twisted pair of gi wire rope, 2mm or 3mm thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the inches cinches clamp is not locked properly. swl 150kgs.make: canara lighting as per tender document as an attachment ( part c electrical lighting work ) , 79mm round identification name plate duly epoxy polyester powder coated in matt texture finish. make : canara lighting, model: inp 79 as per tender document as an attachment ( part c electrical lighting work ) , fixed stage light bar, length 18 mtrs made using ms 40nb class b pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: dual barrel light bar equipped with 40x75x40 cable trenching arrangement with lid for better aesthetic look and cable safety. as per tender document as an attachment ( part c electrical lighting work ) , fixed front of house light bar, length 20 mtrs made using ms 40nb class b pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: dual barrel light bar equipped with 40x75x40 cable trenching arrangement with lid for better aesthetic look and cable safety.as per tender document as an attachment ( part c electrical lighting work ) , main curtain track system 23 mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish.as per tender document as an attachment ( part c electrical lighting work ) , main valance bar, length 23 mtrs made using 40nb, 48mm od construction arrangement 2mm thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. make : canara lighting, model : fvb 23m as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 4 way 10a, 250v a.c, iec, lighting junction box made up of 22swg crca for led lighting fixtures with pipe clamp arrangement for fixing on pipe grid or raul plug arrangement for wall / floor fixing, duly black epoxy polyester powder coated texture finish. make : canara lighting, model:jb 410iec as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 2 way 10a, 250v a.c, iec, junction box made up of 22swg crca with rocker switch to power up splitter and console with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, duly black epoxy polyester powder coated texture finish.make : canara lighting, model : psb 210iec as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 5 pin dmx signal in junction box fitted with 5 pin dmx male socket, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx ibm5 as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 5 pin dmx signal out junction box fitted with 5 pin dmx female socket, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx obf5 as per tender document as an attachment ( part c electrical lighting work ) , fabricated 5 pin dmx signal loop junction box fitted with 5 pin dmx male and female socket with 0.3 mtr dmx loop cable fitted with 5 pin dmx cable mount plug, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx wlb5 as per tender document as an attachment ( part c electrical lighting work ) , well designed 12 way direct lighting distribution board made up of crca sheet undergone through 7 tank process with variouschemical treatment to keep them rust free duly powder coated with matt texture finish consists of r, y, b indicator lamp, 25a tpn incomer, sp mcbs and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and hingable door with magnetic door lock complete make canara lighting, model dldb 12 as per tender document as an attachment ( part c electrical lighting work ) , auxiliary marshalling box for power and signal cable termination in grid level and in motorised light bar ce marked fc / pg cable entry gland required nos as per cable entry. ms channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. as per tender document as an attachment ( part c electrical lighting work ) , motor cable termination box for power cable termination at grid level. ce certified fc / pg 11 and 13.5 cable entry gland required nos as per cable entry. ms channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated combined 1 way motor control center panel cum remote control panel for curtain system made up of 14swg / 16swg / 18 swg crca sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with matt seamans grey texture finish with following specifications. 16a tp or tpn incomer. main contactor of 9a 240v 4 pole contactor with 04 as per tender document as an attachment ( part c electrical lighting work ) , rdm compatible dmx splitter unit with minimum following specifications.1 nos 5 pin dmx in socket and 8 nos 5 pin dmx out socket as per tender document as an attachment ( part c electrical lighting work ) , rdm compatible digital lighting console with minimum following specifications. 512 channel, 1 universe, 2 nos of dmx 5 pin output. as per tender document as an attachment ( part c electrical lighting work ) , 5 pin xlr male / female connectors of made up of extra high temperature resistant insulator material, larger solder contacts for easier termination. make : canara lighting, model : dmx5 cp as per tender document as an attachment ( part c electrical lighting work ) , 5 pin xlr termination plug made up of extra high temperature resistant insulator material, larger solder contacts for easier termination with 120 ohm resister with 0.25watt for signal termination.make : canara lighting, model: dmx5 tp as per tender document as an attachment ( part c electrical lighting work ) , main curtain fabric : fire retardant velvet fabric with lining 100percent ( 2 times of the finished dimension ) gathering as per the approved pattern and colour, not less than 300 gsm, duly stitched along with eyelets. size : 23 meter x 4meter make:nexgen / omphile as per tender document as an attachment ( part c electrical lighting work ) , main valance fabric: fire retardant velvet fabric 100 percent ( 2 times of the finished dimension ) gathering as per the approved pattern and colour, not less than 200 gsm, duly stitched along with eyelets. size : 23 meter x 1 meter make : nexgen as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 3cx1.5 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 7cx1.5 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 4cx 4 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , fr grade dmx signal 4 core plus ground shielding cable with ce mark for the signal network. make:deepcab as per tender document as an attachment ( part c electrical lighting work ) , ms perforated tray of size 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with matt black texture finish along with clamping arrangement. as per tender document as an attachment ( part c electrical lighting work ) , internal earthing copper bare conductor of size 14 swg for power network related to work coming under this scope. as per tender document as an attachment ( part c electrical lighting work ) , installation hardwares such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work. as per tender document as an attachment ( part c electrical lighting work ) , supply, installation, testing and commissioning of following nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc suitable for operating on eco friendly refrigerant 8.75tr scroll r407c 2f left and right auditorium as per tender document as an attachment ( part d air conditioning ) , air handling unit ( ahu ) : supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin, thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, as per tender document as an attachment ( part d air conditioning ) , expansion valve suitable for 8.75tr condensing unit as per tender document as an attachment ( part d air conditioning ) , catch all filter suitable for 11tr condensing unit as per tender document as an attachment ( part d air conditioning ) , shut off valves for suitable pipe sizes as per tender document as an attachment ( part d air conditioning ) , copper refrigerant piping supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 15.8mm dia ( 5 / 8inches ) as per tender document as an attachment ( part d air conditioning ) , copper refrigerant piping supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 28.5mm dia ( 1 1 / 8inches ) as per tender document as an attachment ( part d air conditioning ) , control cabling between idu to odu 2runs of 3c x 1.5 sqmm copper armoured as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 25mm as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 32mm as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 40mm as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc 22g as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc. 24g as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc. 26g as per tender document as an attachment ( part d air conditioning ) , supply installation testing and commissioning of acoustic insulation for supply air ducts with 10mm thick closed cell nitrile rubber as per tender document as an attachment ( part d air conditioning ) , providing of thermal insulation of the ducting using 13mm thick closed cell nitrile rubber make: armacell / k flex equivalent as per tender document as an attachment ( part d air conditioning ) , sitc of fire retardant canvas connection as per tender document as an attachment ( part d air conditioning ) , sitc of al powder coated jet diffusers 16inches dia as per tender document as an attachment ( part d air conditioning ) , sitc of gi butterfly dampers 16inches dia as per tender document as an attachment ( part d air conditioning ) , sitc of al powder coated 4 way diffusers 24inchesx24inches 12 nos as per tender document as an attachment ( part d air conditioning ) , sitc of gi collar dampers 18inchesx18inches 12 nos as per tender document as an attachment ( part d air conditioning ) , sitc of gi vcds as per tender document as an attachment ( part d air conditioning ) , sitc of odu and ahu base framing ms work as per tender document as an attachment ( part d air conditioning ) , sitc of main electrical panel consisting of main incomer mccb 100amps 1no, 63amps 4p mcbs 4 nos for 8.5 tr odus and 32amps 4pole mcb 1 nos for ahu and subzero with push button starter panel volts meter, amps meter and ryb indicators etc complete. as per tender document as an attachment ( part d air conditioning ) , sitc of electrical armoured power cable as per tender document as an attachment ( part d air conditioning ) 4 core x 10 sqmm cu arm as per tender document as an attachment ( part d air conditioning ) , supply of additional refrigerant r407c as per tender document as an attachment ( part d air conditioning ) , supply installation testing and commissioning of 16 passenger 1088 kg lift with the following specification product details as per tender document as an attachment ( part e sitc of lift ) ...

Tirumala Tirupati Devasthanams - Andhra Pradesh

39417556 providing wall paneling, false ceiling, furniture, electrification and air conditioning to the existing auditorium in 3rd floor of spmc ( w ) in the premises of svims tirupati , providing and supplying optra acoustical wall panelling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for fire reaction class a as per astm e 84, fabric with an option of colors as per tender document as an attachment ( part a civil ) , providing and fixing of forbo flotex color / linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per sqm, fire test en 13501, appearance retention hexapod iso 140 8, friction slip resistance test en 14041 class ds, sanitized anti microbial treatment with resilient waterproof backing as per tender document as an attachment ( part a civil ) , providing and fixing of mineral fibre acoustical suspended ceiling system with 19mm thick microlook 90 edge tiles with 15mm face exposed grid. as per tender document as an attachment ( part a civil ) , non combustible heradesign wood wool superfine a2 acoustic ceiling system 600 x 1200 x 25 mm as per tender document as an attachment ( part a civil ) , supply and fixing of seats with the following specifications ( godrej make ) 1 ) seat / back the seat sub assembly is made up of 1.2 plus or minus 0.1 cm. thk ply wood, upholstered with polyester fabric over moulded foam and covered with an injection moulded polypropylene outer cover. as per tender document as an attachment ( part a civil ) , front overhead speakers, brand: ev, model no: ekx 12 specifications: sitc 12inches1400 w ( peak ) , 131 db peak spl, 90degrees x 60degrees pattern for best coverage on mid size stages. 40degrees monitor angle frequency, range ( 10 db ) 55 hz 20 khz ( full space measurement ) as per tender document as an attachment ( part b pa system ) , subwoofer brand: ev model no: ekx 18s specifications: sitc 18inches 1600 w ( peak ) , 134 db peak spl, frequency range ( 10 db ) 35 hz 300khz ( half space frequency response ( 3 db ) 50 hz 100hz ( half space measurement ) speaker type subwoofer as per tender document as an attachment ( part b pa system ) , power amplifier brand: dynacord model no. l3600fd specifications:sitc live 2 x 1800 w with inbuilt dsp compete with fir filters, audio limiters, output delay per channel, 31 band geq per channel, peq per channel, load impedance and having pc remote control option as per tender document as an attachment ( part b pa system ) , powered stage monitors brand: ev model no. ekx 12p specifications: sitc 12inches powered loud speaker, smart dsp features best frequency response ( 3 db ) 60 hz 18 khz1 frequency range ( 10 db ) 50 hz 20 khz1 maximum spl 132 db2, coverage ( h x v ) 90inches x 60inches power rating 1500 w as per tender document as an attachment ( part b pa system ) , music source usb / sd / mp3 player with fm tuner brand: bosch model no. ple sdt specifications:mp3 playback from sd card and usb inputs plena easy line sd tuner bgm source as per tender document as an attachment ( part b pa system ) , corded vocal microphone brand:ev model no. pl24s specifications:sitc of corded vocal microphone with dynamic neodymium magnet microphone element, with frequency response 80hz 16khz, super cardioid polar pattern, sensitivity of 2.2mv / pa and output impedance 600 ohm. must have on / off switch. as per tender document as an attachment ( part b pa system ) , corded instrument microphone brand: ev model no. pl37 specifications:sitc of corded instrument microphone with self biased condenser microphone element, with frequency response of 55hz 16khz , cardioid polar pattern, sensitivity of 5.5mv / pa, rated impedance of 200 ohm, maximum spl :130db spl and dynamic range 107db as per tender document as an attachment ( part b pa system ) , wireless handheld microphone brand ev model no r300hd specifications designed for the entry level professional, the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , wireless lepel microphone brand: ev model no. r300 l specifications designed for the entrylevel professional, the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , wireless head worn microphone brand ev model no r300e specifications designed for the entry level professional the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , gooseneck microphone brand: ev model no. re90p 18 specifications: sitc of freestanding gooseneck mic with base for podium having back electret condenser microphone element, hyper cardioid polar pattern, led status display as per tender document as an attachment ( part b pa system ) , speaker mountings suitable to the speakers specifications: sitc of fabricated speaker mounts as per tender document as an attachment ( part b pa system ) , mike table stand specifications: sitc mike table stand as per tender document as an attachment ( part b pa system ) , microphone desk stands specifications: sitc microphone desk stands as per tender document as an attachment ( part b pa system ) , microphone floor stands brand: ev specifications: microphone floor stands as per tender document as an attachment ( part b pa system ) , mixer brand: sound craft model no. signature 16 specifications: sitc 16 channel mixing console as per tender document as an attachment ( part b pa system ) , microphone cable brand: belden specifications: sitc of 2 core shielded microphone cable. as per tender document as an attachment ( part b pa system ) , speaker cable brand: finolex specifications: sitc of 2 core 2.5 sqm speaker cable as per tender document as an attachment ( part b pa system ) , equipment rack brand: d link / netrack / netfox model no. 24u specifications: sitc of 24 u equipment rack as per tender document as an attachment ( part b pa system ) , audio recorder brand: sony specifications: audio recorder as per tender document as an attachment ( part b pa system ) , connectors brand: neutrik specifications: sitc of xlr / phono socket / rca / p38 / ep connectors as per tender document as an attachment ( part b pa system ) , premium quality led parcan light with latest rdm technology for user friendly operation with below specifications: light source : single cob led source as per tender document as an attachment ( part c electrical lighting work ) , premium quality led blinder effect light with latest rdm technology for user friendly operation with below specifications: light source : quad led cob source as per tender document as an attachment ( part c electrical lighting work ) , premium quality led par light with latest rdm technology for user friendly operation with below specifications: base color rgbw color mixing, led configuration: multiple nos individual rgbw led configuration, power cable: 3 core 1 sq.mm. copper pvc insulated as per tender document as an attachment ( part c electrical lighting work ) , premium quality led profile spot light with latest rdm technology for user friendly operation with below specifications: light source : single led cob source as per tender document as an attachment ( part c electrical lighting work ) , 150w led beam, spot, wash moving light with rdm protocol and hi grade plastic body black color with following specifications led : 150w as per tender document as an attachment ( part c electrical lighting work ) , ce certified 300w led follow spot light 3200k with rdm / dmx protocol and die cast body duly epoxy polyester powder coated in black matt texture finish with following specifications led : 300w cob led source as per tender document as an attachment ( part c electrical lighting work ) , die cast aluminium c clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications. lock ms threaded galvanized lock key as per tender document as an attachment ( part c electrical lighting work ) , safety bond with lock clip 1.5 mtr long made with twisted pair of gi wire rope, 2mm or 3mm thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the inches cinches clamp is not locked properly. swl 150kgs.make: canara lighting as per tender document as an attachment ( part c electrical lighting work ) , 79mm round identification name plate duly epoxy polyester powder coated in matt texture finish. make : canara lighting, model: inp 79 as per tender document as an attachment ( part c electrical lighting work ) , fixed stage light bar, length 18 mtrs made using ms 40nb class b pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: dual barrel light bar equipped with 40x75x40 cable trenching arrangement with lid for better aesthetic look and cable safety. as per tender document as an attachment ( part c electrical lighting work ) , fixed front of house light bar, length 20 mtrs made using ms 40nb class b pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: dual barrel light bar equipped with 40x75x40 cable trenching arrangement with lid for better aesthetic look and cable safety.as per tender document as an attachment ( part c electrical lighting work ) , main curtain track system 23 mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish.as per tender document as an attachment ( part c electrical lighting work ) , main valance bar, length 23 mtrs made using 40nb, 48mm od construction arrangement 2mm thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. make : canara lighting, model : fvb 23m as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 4 way 10a, 250v a.c, iec, lighting junction box made up of 22swg crca for led lighting fixtures with pipe clamp arrangement for fixing on pipe grid or raul plug arrangement for wall / floor fixing, duly black epoxy polyester powder coated texture finish. make : canara lighting, model:jb 410iec as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 2 way 10a, 250v a.c, iec, junction box made up of 22swg crca with rocker switch to power up splitter and console with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, duly black epoxy polyester powder coated texture finish.make : canara lighting, model : psb 210iec as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 5 pin dmx signal in junction box fitted with 5 pin dmx male socket, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx ibm5 as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 5 pin dmx signal out junction box fitted with 5 pin dmx female socket, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx obf5 as per tender document as an attachment ( part c electrical lighting work ) , fabricated 5 pin dmx signal loop junction box fitted with 5 pin dmx male and female socket with 0.3 mtr dmx loop cable fitted with 5 pin dmx cable mount plug, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx wlb5 as per tender document as an attachment ( part c electrical lighting work ) , well designed 12 way direct lighting distribution board made up of crca sheet undergone through 7 tank process with variouschemical treatment to keep them rust free duly powder coated with matt texture finish consists of r, y, b indicator lamp, 25a tpn incomer, sp mcbs and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and hingable door with magnetic door lock complete make canara lighting, model dldb 12 as per tender document as an attachment ( part c electrical lighting work ) , auxiliary marshalling box for power and signal cable termination in grid level and in motorised light bar ce marked fc / pg cable entry gland required nos as per cable entry. ms channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. as per tender document as an attachment ( part c electrical lighting work ) , motor cable termination box for power cable termination at grid level. ce certified fc / pg 11 and 13.5 cable entry gland required nos as per cable entry. ms channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated combined 1 way motor control center panel cum remote control panel for curtain system made up of 14swg / 16swg / 18 swg crca sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with matt seamans grey texture finish with following specifications. 16a tp or tpn incomer. main contactor of 9a 240v 4 pole contactor with 04 as per tender document as an attachment ( part c electrical lighting work ) , rdm compatible dmx splitter unit with minimum following specifications.1 nos 5 pin dmx in socket and 8 nos 5 pin dmx out socket as per tender document as an attachment ( part c electrical lighting work ) , rdm compatible digital lighting console with minimum following specifications. 512 channel, 1 universe, 2 nos of dmx 5 pin output. as per tender document as an attachment ( part c electrical lighting work ) , 5 pin xlr male / female connectors of made up of extra high temperature resistant insulator material, larger solder contacts for easier termination. make : canara lighting, model : dmx5 cp as per tender document as an attachment ( part c electrical lighting work ) , 5 pin xlr termination plug made up of extra high temperature resistant insulator material, larger solder contacts for easier termination with 120 ohm resister with 0.25watt for signal termination.make : canara lighting, model: dmx5 tp as per tender document as an attachment ( part c electrical lighting work ) , main curtain fabric : fire retardant velvet fabric with lining 100percent ( 2 times of the finished dimension ) gathering as per the approved pattern and colour, not less than 300 gsm, duly stitched along with eyelets. size : 23 meter x 4meter make:nexgen / omphile as per tender document as an attachment ( part c electrical lighting work ) , main valance fabric: fire retardant velvet fabric 100 percent ( 2 times of the finished dimension ) gathering as per the approved pattern and colour, not less than 200 gsm, duly stitched along with eyelets. size : 23 meter x 1 meter make : nexgen as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 3cx1.5 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 7cx1.5 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 4cx 4 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , fr grade dmx signal 4 core plus ground shielding cable with ce mark for the signal network. make:deepcab as per tender document as an attachment ( part c electrical lighting work ) , ms perforated tray of size 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with matt black texture finish along with clamping arrangement. as per tender document as an attachment ( part c electrical lighting work ) , internal earthing copper bare conductor of size 14 swg for power network related to work coming under this scope. as per tender document as an attachment ( part c electrical lighting work ) , installation hardwares such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work. as per tender document as an attachment ( part c electrical lighting work ) , supply, installation, testing and commissioning of following nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc suitable for operating on eco friendly refrigerant 8.75tr scroll r407c 2f left and right auditorium as per tender document as an attachment ( part d air conditioning ) , air handling unit ( ahu ) : supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin, thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, as per tender document as an attachment ( part d air conditioning ) , expansion valve suitable for 8.75tr condensing unit as per tender document as an attachment ( part d air conditioning ) , catch all filter suitable for 11tr condensing unit as per tender document as an attachment ( part d air conditioning ) , shut off valves for suitable pipe sizes as per tender document as an attachment ( part d air conditioning ) , copper refrigerant piping supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 15.8mm dia ( 5 / 8inches ) as per tender document as an attachment ( part d air conditioning ) , copper refrigerant piping supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 28.5mm dia ( 1 1 / 8inches ) as per tender document as an attachment ( part d air conditioning ) , control cabling between idu to odu 2runs of 3c x 1.5 sqmm copper armoured as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 25mm as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 32mm as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 40mm as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc 22g as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc. 24g as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc. 26g as per tender document as an attachment ( part d air conditioning ) , supply installation testing and commissioning of acoustic insulation for supply air ducts with 10mm thick closed cell nitrile rubber as per tender document as an attachment ( part d air conditioning ) , providing of thermal insulation of the ducting using 13mm thick closed cell nitrile rubber make: armacell / k flex equivalent as per tender document as an attachment ( part d air conditioning ) , sitc of fire retardant canvas connection as per tender document as an attachment ( part d air conditioning ) , sitc of al powder coated jet diffusers 16inches dia as per tender document as an attachment ( part d air conditioning ) , sitc of gi butterfly dampers 16inches dia as per tender document as an attachment ( part d air conditioning ) , sitc of al powder coated 4 way diffusers 24inchesx24inches 12 nos as per tender document as an attachment ( part d air conditioning ) , sitc of gi collar dampers 18inchesx18inches 12 nos as per tender document as an attachment ( part d air conditioning ) , sitc of gi vcds as per tender document as an attachment ( part d air conditioning ) , sitc of odu and ahu base framing ms work as per tender document as an attachment ( part d air conditioning ) , sitc of main electrical panel consisting of main incomer mccb 100amps 1no, 63amps 4p mcbs 4 nos for 8.5 tr odus and 32amps 4pole mcb 1 nos for ahu and subzero with push button starter panel volts meter, amps meter and ryb indicators etc complete. as per tender document as an attachment ( part d air conditioning ) , sitc of electrical armoured power cable as per tender document as an attachment ( part d air conditioning ) 4 core x 10 sqmm cu arm as per tender document as an attachment ( part d air conditioning ) , supply of additional refrigerant r407c as per tender document as an attachment ( part d air conditioning ) , supply installation testing and commissioning of 16 passenger 1088 kg lift with the following specification product details as per tender document as an attachment ( part e sitc of lift ) ...

Tirumala Tirupati Devasthanams - Andhra Pradesh

39241305 supply, installation, testing and commissioning of ac system at pet ct building in svims hospital, tirupati under buy back offer , supply, installation of 8.75 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc. suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc., capacity : 8.75 tr make : voltas or any approved brands in ttd,supply, installation of new air handling unit (horizontal floor mounted) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin, thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, coil section with 6 rows deep dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.i. casing, suitable number of distributors, 18g ss 304 drain pan duly insulated with 13mm closed cell nitrile rubber insulation, fan section with didw centrifugal fan, eff2 motor. the air handling units shall consist of suitable vibration isolators, access door gss channel base frame and aluminium volume control damper at outlet. the face velocity across coils and filters shall be maximum 500 fpm. the fans shall be selected considering a maximum outlet velocity of 10 m / s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from the filters fixed in the ahu, one additional set of spare filters shall also be provided and including buy back of old ahu, condensing units, copper pipe, ducts, electrical panel. and allied equipments etc., capacity 10500 cfm air flow rate at rate of 50 mmwc static make : flaktwoods / systemair / edge tech / sagarair/ plus vent/ luftek (1 working plus 1 standby). warranty : 24 months for all items,supply and installation of microprocessor based electrical panel with suitable rating incoming mccb with digital kwh meter and outgoing feeders with suitable rating mcbs to the 8 nos 8.75 tr condensing units and 2 no. ahu. make : softhard / bluevolt/chaya switch gears,supply and installation of rectangular g.s.s. ducting with ms angle flanges, complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make : jindal / tata 20 g,supply and installation of rectangular g.s.s. ducting with ms angle flanges, complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make : jindal / tata 22 g,supply and installation of rectangular g.s.s. ducting with ms angle flanges, complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make : jindal / tata 24 g,supply and fixing of external duct insulation with 19 mm thick closed cell elastomeric nitrile rubber covered with 24g aluminium cladding. make : armocell , k flex, a flex,copper refrigerant piping: supply, installation of 19 g hard copper piping of following sizes (the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth) including supporting fixtures and accessories etc. complete. 5/8 inch dia copper pipe,copper refrigerant piping: supply, installation of 19 g hard copper piping of following sizes (the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth) including supporting fixtures and accessories etc. complete. 7/8 inch dia copper pipe with insulation,additional refrigerant r407c gas,scaffolding for ducting works,necessary civil works like foundations, wall opening and finishing etc.,dismantling of outside ducting, old ahu, outdoor units, electrical panel, copper piping etc.,,testing and commissioning of the new ac system,supply and installation of suitable expansion valve. make: sporlan / alco / danfoss,supply and installation of suitable catchall filter driers. make: sporlan / alco / danfoss,supply, transporatation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders etc., complete (nb: add 30 percent extra for perforated cable tray with cover) 300mm x 50mm x 1.6mm,supply, transporatation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with suspenders etc., complete (nb: add 30 percent extra for perforated cable tray with cover) 600mm x 50mm x 2.0mm,supply of . . . . . pvc insulated and sheathed frls copper round cable for voltage up to 1100v as per is 694/1990. makes: finolex / rr kabel / havells /kei/polycab/ gloster/goldmedal/gm 3 core 1.5 sqmm,supply of . . . . . pvc insulated and sheathed frls copper round cable for voltage up to 1100v as per is 694/1990. makes: finolex / rr kabel / havells /kei/polycab/ gloster/goldmedal/gm 4 core 10 sqmm...

Tirumala Tirupati Devasthanams - Andhra Pradesh

38849376 supply, installation, testing and commissioning of ac system at pet ct building in svims hospital, tirupati under buy back offer , supply, installation of 8.75 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc. suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc., capacity : 8.75 tr make : voltas or any approved brands in ttd, supply, installation of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin, thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, coil section with 6 rows deep dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.i. casing, suitable number of distributors, 18g ss 304 drain pan duly insulated with 13mm closed cell nitrile rubber insulation, fan section with didw centrifugal fan, eff2 motor. the air handling units shall consist of suitable vibration isolators, access door gss channel base frame and aluminium volume control damper at outlet. the face velocity across coils and filters shall be maximum 500 fpm. the fans shall be selected considering a maximum outlet velocity of 10 m / s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from the filters fixed in the ahu, one additional set of spare filters shall also be provided and including buy back of old ahu, condensing units, copper pipe, ducts, electrical panel. and allied equipments etc., capacity 10500 cfm air flow rate at rate of 50 mmwc static make : flaktwoods / systemair / edge tech / sagarair / plus vent / luftek ( 1 working plus 1 standby ) . warranty : 24 months for all items, supply and installation of microprocessor based electrical panel with suitable rating incoming mccb with digital kwh meter and outgoing feeders with suitable rating mcbs to the 8 nos 8.75 tr condensing units and 2 no. ahu. make : softhard / bluevolt / chaya switch gears, supply and installation of rectangular g.s.s. ducting with ms angle flanges, complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make : jindal / tata 20 g, supply and installation of rectangular g.s.s. ducting with ms angle flanges, complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make : jindal / tata 22 g, supply and installation of rectangular g.s.s. ducting with ms angle flanges, complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make : jindal / tata 24 g, supply and fixing of external duct insulation with 19 mm thick closed cell elastomeric nitrile rubber covered with 24g aluminium cladding. make : armocell , k flex, a flex, copper refrigerant piping: supply, installation of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 5 / 8 inch dia copper pipe, copper refrigerant piping: supply, installation of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 7 / 8 inch dia copper pipe with insulation, additional refrigerant r407c gas, scaffolding for ducting works, necessary civil works like foundations, wall opening and finishing etc., dismantling of outside ducting, old ahu, outdoor units, electrical panel, copper piping etc., , testing and commissioning of the new ac system, supply and installation of suitable expansion valve. make: sporlan / alco / danfoss, supply and installation of suitable catchall filter driers. make: sporlan / alco / danfoss, supply, transporatation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling / wall with suspenders etc., complete ( nb: add 30 percent extra for perforated cable tray with cover ) 300mm x 50mm x 1.6mm, supply, transporatation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling / wall with suspenders etc., complete ( nb: add 30 percent extra for perforated cable tray with cover ) 600mm x 50mm x 2.0mm, supply of . . . . . pvc insulated and sheathed frls copper round cable for voltage up to 1100v as per is 694 / 1990. makes: finolex / rr kabel / havells / kei / polycab / gloster / goldmedal / gm 3 core 1.5 sqmm, supply of . . . . . pvc insulated and sheathed frls copper round cable for voltage up to 1100v as per is 694 / 1990. makes: finolex / rr kabel / havells / kei / polycab / gloster / goldmedal / gm 4 core 10 sqmm...

Tirumala Tirupati Devasthanams - Andhra Pradesh

37825586 supply of furniture to the newly renovated chamber of joint director ( fac ) , state audit, ttd at tirupati , executive table, executive chair, supply of visitor chair riyam visitor chair : back: made of nylon frame with fabric small cushion with fabric uphosty., supply of model : platin table as per picture enclosed, top is made of 16mm plb top covered with all sides aluminium profiles, 5 seater sofa...

Tirumala Tirupati Devasthanams - Andhra Pradesh

37731957 supply of furniture to the special officer, sbio, svims for use in block no.1, birrd doctors quarters, tirupati , supply of model no cot king size 78 inches l x 72 inches w cot made with head rest and foot rest 18mm ply wood with 6mm mdf side panels 18 inches ply wood with deco spray polish, head board size: 42 inches h x 74 inches l and foot board size 74 inches l x 18 inches ( h ) , with 12mm commercial plywood with necessary hardware like bolts to fit the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of mattress of overall size 78 inches x 72 inches x 6 inches with the following dimensions top pu foam layer 23d coir 90 density middle foam 32 mm density, bottom side 90 density both sides combinations of coir and higher density foam a mattress that support your lumbar spine l2 l3 l4 and l5 comes with antisagging technology for durability. reversible medium firm on one side and high firm one other side. the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of polyester fiber filled pillow of size 27 inches x 17inches with medium soft pillow with micro fiber filling retains bounce for long time and gives cozy comfort to your neck micro pitch quilting for a rich look the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of dining table size 60 inches l x 36inches w x 30inches h plus or minus 10mm with standard designs with metal legs 80mm x 80mm one side curved shape and 6 nos chairs.materials: made with metal legs with wooden powder coating finish with glass top.the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of model iken ws 5 3 plus 1 plus 1 seater sofa made with seat and back with 45 density pu moulded foam with fabric upholstery, seat foam thickness 4inches and back foam thickness 3.5 inches and side foam thickness 3inches fitting. made with plywood isi 3 seater b17overall size w 1800 mm x d 740 mm x h 780 mm and 1 seater size w 700 mm x d 740 mm x h 780 mm. covered with upholstery totally with fabric of special type good quality and minimum gsm ( grams per square meter ) should not less than 280 or artificial leather rexine as per approved by the dept the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of wardrobe made with water fire proof prelaminated 18 mm thick iso particle board with dimensions as height 6 feet width 3 feet depth 1.5 feet two door two shelfs with one half locker shelf with lock on both main door and locker door with ss steel handles the rate including all taxes and other incidental charges etc complete excluding gst, supply of model platin table as per picture enclosed, top is made of 16mm plb top covered with all sides aluminium profiles, with aluminium legs with anudised finish with bushes size 900mm l x 500 mm w x450mm h mm, with tolerance plus or minus 10mm as per picture enclosed the rate is inclusive of all taxes and other incidental charges etc complete excluding gst, supply of chappal stand overall size 3 feet x 3 feet 12 mm plywood with wood polish the rate is inclusive of all taxes and other incidental charges etc complete excluding gst...

Tirumala Tirupati Devasthanams - Andhra Pradesh

37034770 supply of furniture to the newly renovated chamber of joint director ( fac ) , state audit, ttd at tirupati , executive table, executive chair, supply of visitor chair riyam visitor chair : back: made of nylon frame with fabric small cushion with fabric uphosty., supply of model : platin table as per picture enclosed, top is made of 16mm plb top covered with all sides aluminium profiles, 5 seater sofa...

Tirumala Tirupati Devasthanams - Andhra Pradesh

36958878 improvements to the existing ductable a.c system in sri kapileswaraswamy temple, tirupati , dismantling and shifting of defective ahu cooling coils, 2 nos. of 7.5 tr out door units to dpw stores ( elec ) tirupati, supply installation, testing and commissioning of 8.75 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc., suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc., make : voltas / bluestar / carrier, supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.l. inner skin and 0.8 mm pre coated gl outer skin , thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, coil section with 6 rows deep dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.l. casing, suitable number of distributors 18g ss 304 drain pan duly insulated with 13 mm closed cell nitrile rubber insulation, fan section with dldw centrifugal fan .eff2 motor the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminium volume control damper at outlet. the face velocity across coils and filters shall be maximum 500 fpm.the fans shall be selected considering a maximum outlet velocity of 10 m / s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from the filters fixed in the ahu, one additional set of spare filters shall also be provided. capacity 2550 cfm airflow rate at 50 mmwc static. make:flaktwoods / systemair / sagarair / plus vent / luftek, copper refrigerant piping: supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with19mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete suitable to new units. 5 / 8 inch dia copper pipe, copper refrigerant piping: supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with19mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete suitable to new units.1 1 / 8 inch dia copper pipe with insulation, cpvc drain pipe with insulation, removing of existing cable tray and supply and installation of hot dipped galvanized cable trays. 300 mm, removing and supply and laying power / control cabling . make:finolex / polycab, supply and installation suitable new thermostatic expansion valve and catch all filter driers along with necessary fittings make : sparlan / alco, modification and revamp of rectangular g.s.s. ducting with ms angle flanges complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make:jindal / tata, pressure testing, vaccumising, configuration of outdoor units with existing voltas make microprocessor commissioning the ac system by authorised engineer including necessary charging of refrigerant gas ( warranty : one year from the date of installation for s.no.2 to 11 ) ...

Tirumala Tirupati Devasthanams - Andhra Pradesh

36797795 replacement and enhancement of existing ductable ac system to sri govindaraja swamy temple, tirupati , supply, installation, testing and commissioning of 11 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins , condenser fans, etc suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc. make : voltas / bluestar / carrier, supply, installation and testing of 19 g hard copper piping of following size ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete.7 / 8 inch dia copper pipe, supply, installation and testing of 19 g hard copper piping of following size ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete.1.1 / 8 inch dia copper pipe with insulation, supply and installation of suitable new thermostatic expansion valve and catch all filter driers along with necessary fittings:make : sporlan / alco, providing of r 407c refrigerant, supply and installation of microprocessor based electrical panel with suitable rating incoming mccb with digital kwh meter and outgoing feeders with suitable rating mcbs to the 2 nos 11 tr condensing units and 1 no. ahu.make : softhard / bluevolt / chaya switch gear, removing and re fixing of existing electrical state panel including configuration and commissioning of microprocessor based units 11 tr 2 nos new outdoor units and with the new air handling units by authorized engineer, supply and laying power / control cabling from panel to condensing units ( compressor ) with 3c x 6 sqmm copper armoured. make : finolex / polycab., supply and laying power / control cabling from panel to ahu fan motor with 3c x 4 sqmm copper armoured. make : finolex / polycab., supply and laying power / control cabling from panel to condensing unit ( condenser fans + control ) with 7c x 1.5 sqmm copper armoured. make : finolex / polycab., supply and laying power / control cabling between thermostat and panel with 3c x 1.5 sqmm copper armoured. make : finolex / polycab., supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin, thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, coil section with 6 rows deep 3 circuit interlaced dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.i. casing, suitable number of distributors, 18g ss 304 drain pan duly insulated with 13mm closed cell nitrile rubber insulation, fan section with didw centrifugal fan eff2 motor. the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminium volume control damper at outlet . the face velocity across coils and filters shall be maximum 500 fpm. the fans shall be selected considering a maximum outlet velocity of 10 m / s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from the filters fixed in the ahu , one additional set of spare filters shall also be provided. capacity 4400 cfm airflow rate at 60 mmwc static. make : flaktwoods / systemair, fan : nicotra / kruger, motor : crompton / abb., supply and installation of rectangular g.s.s. ducting with 24g including ms angle flanges , complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc.make : jindal / tata., supply and fixing of external duct insulation with 19 mm thick closed cell elastomeric nitrile rubber covered with 24g aluminium cladding., painting of ducts with one coat of zinc chromate yellow primer and 2 coats of enamel paint of approved colour., supply and installation of 32 mm diameter drain piping using upvc pipes along with necessary fittings.make : tata / jindal, supply and fixing of extruded aluminium duct mounted volume control dampers.make : systemair / vj air, operation of the ac system including integration and calibration of the existing and newly supplied electrical starter panels for smooth operation by authorised engineer including transportation and accommodation, exhaust system: supply, installation, testing and commissioning of sisw backward curved belt driven centrifugal fan ( bearing outside airflow path ) complete with base frame , ie2 motor with rain canopy , drive set up , spring type vibration isolators, belt guard and drain plug . the fan shall be with pr12 coating suitable for outdoor installation on terrace. ( adjacent to the condensing units ) 1500 cfm airflowrate at30 mmwg static pressure. make : kruger, model:bsb 280 uim with 0.75 kw 4p motor, supply and installation of exhaust air ducting with 0.6 mm thick rectangular gss ducts complete with supports required as per site conditions.make of gs sheets : tata / jindal, supply and installation of exhaust air ducting with 0.6 mm thick flat oval / round gss ducts complete with supports required as per site conditions.make of gs sheets :tata / jindal, painting of ducting being installed outside the temple with one coat of zinc chromate yellow primer and two coats of enamel paint of suitable colour., supply and fixing of exhaust air grilles in powder coated extruded aluminium construction.make : vj air / sagarair, supply, installation, testing and commissioning of electrical panel board made out of 16g crca sheet duly powder coated comprising of the below16 a tp mcb 1 no.0 500 v voltmeter with selector switch 1 set0 200 / 5a ammeter with selector switch 1 setryb indication lamps 1 set0.75 kw dol starter 3 nos.on / off push buttons with indication lamps and trip indication lamp.make of switchgear : l and t / siemens / schneider / abbmake of panel : cpri approved manufacturer, supply and installation of 3c x 2.5 sqmm size 650 / 1100 volts grade xlpe insulated armoured power cable with copper conductor, complete with cable end terminations and glanding.make : finolex / polycab, supply and installation of earthing with 8 swg gi wire., supply and installation of pre galvanised steel perforated type cable trays.100 mm wide ( 25 mm height and 1.6 mm thick ) , dismantling, shifting of ahu, outdoors and transportation and handing over to dpw stores ( elec ) ...

Tirumala Tirupati Devasthanams - Andhra Pradesh

36515905 improvements to the existing ductable a.c system in sri kapileswaraswamy temple, tirupati , dismantling and shifting of defective ahu cooling coils, 2 nos. of 7.5 tr out door units to dpw stores ( elec ) tirupati, supply installation, testing and commissioning of 8.75 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc., suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc., make : voltas / bluestar / carrier, supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.l. inner skin and 0.8 mm pre coated gl outer skin , thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, coil section with 6 rows deep dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.l. casing, suitable number of distributors 18g ss 304 drain pan duly insulated with 13 mm closed cell nitrile rubber insulation, fan section with dldw centrifugal fan .eff2 motor the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminium volume control damper at outlet. the face velocity across coils and filters shall be maximum 500 fpm.the fans shall be selected considering a maximum outlet velocity of 10 m / s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from the filters fixed in the ahu, one additional set of spare filters shall also be provided. capacity 2550 cfm airflow rate at 50 mmwc static. make:flaktwoods / systemair / sagarair / plus vent / luftek, copper refrigerant piping: supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with19mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete suitable to new units. 5 / 8 inch dia copper pipe, copper refrigerant piping: supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with19mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete suitable to new units.1 1 / 8 inch dia copper pipe with insulation, cpvc drain pipe with insulation, removing of existing cable tray and supply and installation of hot dipped galvanized cable trays. 300 mm, removing and supply and laying power / control cabling . make:finolex / polycab, supply and installation suitable new thermostatic expansion valve and catch all filter driers along with necessary fittings make : sparlan / alco, modification and revamp of rectangular g.s.s. ducting with ms angle flanges complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make:jindal / tata, pressure testing, vaccumising, configuration of outdoor units with existing voltas make microprocessor commissioning the ac system by authorised engineer including necessary charging of refrigerant gas ( warranty : one year from the date of installation for s.no.2 to 11 ) ...

Tirumala Tirupati Devasthanams - Andhra Pradesh

36012700 improvements to the existing ductable a.c system in sri kapileswaraswamy temple, tirupati , dismantling and shifting of defective ahu cooling coils, 2 nos. of 7.5 tr out door units to dpw stores ( elec ) tirupati, supply installation, testing and commissioning of 8.75 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc., suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc., make : voltas / bluestar / carrier, supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.l. inner skin and 0.8 mm pre coated gl outer skin , thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, coil section with 6 rows deep dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.l. casing, suitable number of distributors 18g ss 304 drain pan duly insulated with 13 mm closed cell nitrile rubber insulation, fan section with dldw centrifugal fan .eff2 motor the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminium volume control damper at outlet. the face velocity across coils and filters shall be maximum 500 fpm.the fans shall be selected considering a maximum outlet velocity of 10 m / s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from the filters fixed in the ahu, one additional set of spare filters shall also be provided. capacity 2550 cfm airflow rate at 50 mmwc static. make:flaktwoods / systemair / sagarair / plus vent / luftek, copper refrigerant piping: supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with19mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete suitable to new units. 5 / 8 inch dia copper pipe, copper refrigerant piping: supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with19mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete suitable to new units.1 1 / 8 inch dia copper pipe with insulation, cpvc drain pipe with insulation, removing of existing cable tray and supply and installation of hot dipped galvanized cable trays. 300 mm, removing and supply and laying power / control cabling . make:finolex / polycab, supply and installation suitable new thermostatic expansion valve and catch all filter driers along with necessary fittings make : sparlan / alco, modification and revamp of rectangular g.s.s. ducting with ms angle flanges complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make:jindal / tata, pressure testing, vaccumising, configuration of outdoor units with existing voltas make microprocessor commissioning the ac system by authorised engineer including necessary charging of refrigerant gas ( warranty : one year from the date of installation for s.no.2 to 11 ) ...

Indian Navy - Andhra Pradesh

34997475 procurement of miscellaneous items for conference hall of ins circars , provision of conference table with laminated sunmica on top and all sides of table ( size: 6300mm x 1500mm ) , provision of microphone for conference table ( make: ahuja ) ( model: cmd 5200 ) , provision of amplifier for conference table ( make: ahuja ) , provision of 16w speakers for conference room ( make: ahuja ) , provision of electrical supply for microphone, amplifiers and speakers , provision of green grass mat , provision of footrest and stand for accessories , provision of warm light with c type aluminium profile , provision of acrylic name tallies for conference table => limited...

Tirumala Tirupati Devasthanams - Andhra Pradesh

34873070 supply, installation, testing commissioning of ductable ac system to sri krishna swamy temple in sri pat, tiruchanoor , supply , installation , testing and commissioning of 5.5 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins , condenser fans, etc suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc. make : voltas/daikin /carrier / blue star/ hitachi,supply , installation , testing and commissioning of new air handling unit (horizontal floor mounted) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin , thermal break aluminium profile with thermal barrier , 43mm thick puf panels . the air handling unit shall consist of face mounted 50mm thick 20 micron filters , coil section with 6 rows deep dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.i. casing , suitable number of distributors , 18g ss 304 drain pan duly insulated with 13mm closed cell nitrile rubber insulation , fan section with didw centrifugal fan , eff2 motor . the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminium volume control damper at outlet . the face velocity across coils and filters shall be maximum 500 fpm. the fans shall be selected considering a maximum outlet velocity of 10 m/s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from the filters fixed in the ahu , one additional set of spare filters shall also be provided. capacity 1000 cfm air flow rate at 50 mmwc static. make : flaktwoods / systemair/sagarair/plus vent/ luftek,copper refrigerant piping :supply, installation and testing of 19 g hard copper piping of following sizes (the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth) including supporting fixtures and accessories etc. complete. 1/2 inche dia copper pipe,supply, installation and testing of 19 g hard copper piping of following sizes (the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth) including supporting fixtures and accessories etc. complete.3/4 inche dia copper pipe with insulation,supply and installation of hot dipped galvanized cable trays. 300 mm,supply and laying power / control cabling of following sizes. make : finolex / polycabpower cabling from panel to condensing units (compressor) 3c x 6 sqmm copper armoured,supply and laying power / control cabling of following sizes. make : finolex / polycabpower cabling from panel to ahu fan motor 3c x 4 sqmm copper armoured,supply and laying power / control cabling of following sizes. make : finolex / polycabcontrol cabling between thermostat and panel 3c x 1.5 sqmm copper armoured,supply and installation of microprocessor based electrical panel with 1 no. 63 amps fp incoming mccb with digital kwh meter and outgoing feeders with 1 no. 32 amps tp mcbs and 3/4 nos 6 32 amps sp mcbsto the 1 no. 5.5 tr condensing units and 1 no. ahu make : softhard / bluevolt,supply and installation of suitable new thermostatic expansion valve and catch all filter driers along with necessary fittings. make : sporlan / alco,supply and installation of rectangular g.s.s. ducting with ms angle flanges , complete with gaskets and supporting arrangement using ms angles/gi threaded rods etc. make : jindal / tata.24g,supply and fixing of external duct insulation with 19 mm thick closed cell elastomeric nitrile rubber covered with 24g aluminium cladding.,supply and fixing of internal duct insulation with 12 mm thick closed cell elastomeric nitrile rubber anti microbial.,upvc drain pipe of size 40 mm,pressure testing vaccumising and commissioning of the system by authorized engineer.,supply and charging of r407c /r410arefrigerant gas note: guarantee period one year from the date of installation complete....

Tirumala Tirupati Devasthanams - Andhra Pradesh

33850885 revamping of existing ductable ac system in sri kalyana venkateswara swamy temple, srinivasamangapuram , dx type aircooled condensing units: supply , installation , testing and commisioning of 11 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins , condenser fans, etc suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc.make : voltas / blue star / daikin / toshiba / mitsubishi, copper refrigerant pipingsupply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete.7 / 8 inches dia copper pipe, copper refrigerant pipingsupply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete.1.1 / 8 inches dia copper pipe with insulation, supply and installation of suitable new thermostatic expansion valve and catch all filter driers along with necessary fittingsmake : sporlan / alco, providing of r 407c refrigerant, supply and installation of microprocessor based electrical panel with suitable rating incoming mccb with digital kwh meter and outgoing feeders with suitable rating mcbs to the 3 no.s 11 tr condensing units and 1 no. ahu .make : softhard / bluevolt, supply and laying power / control cabling of following sizes.make : finolex / polycabpower cabling from panel to condensing units ( compressor ) 3c x 6 sqmm copper armoured, supply and laying power / control cabling of following sizes.make : finolex / polycabpower cabling from panel to ahu fan motor 3c x 4 sqmm copper armoured, supply and laying power / control cabling of following sizes.make : finolex / polycabpower cum control cabling from panel to condensing unit ( condenser fans plus control ) 7c x 1.5 sqmm copper armoured, supply and laying power / control cabling of following sizes.make : finolex / polycabcontrol cabling between thermostat and panel 3c x 1.5 sqmm copper armoured, supply, transportation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling / wall with suspenders etc., complete ( nb: add 30% extra for perforated cable tray with cover ) 100mm x 50mm x 1.6mm, supply, transportation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling / wall with suspenders etc., complete ( nb: add 30% extra for perforated cable tray with cover ) 300mm x 50mm x 1.6mm, earthing 8 swg gi wire, air handling unit ( ahu ) supply , installation , testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin , thermal break aluminium profile with thermal barrier , 43mm thick puf panels . the air handling unit shall consist of face mounted 50mm thick 20 micron filters , coil section with 6 rows deep 3 circuit interlaced dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.i. casing , suitable number of distributors , 18g ss 304 drain pan duly insulated with 13mm closed cell nitrile rubber insulation , fan section with didw centrifugal fan , eff2 motor . the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminium volume control damper at outlet . the face velocity across coils and filters shall be maximum 500 fpm. the fans shall be selected considering a maximum outlet velocity of 10 m / s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from thefilters fixed in the ahu , one additional set of spare filters shall also be provided. capacity 4300 cfm airflowrate at the rate of 60 mmwc static make : flaktwoods / systemair / sagar air fan : nicotra / kruger , motor : crompton / abb, air handling unit ( ahu ) dismantling and shifting of existing 1 no. of 15tr air handling unit along with its air cooled condenser., supply and installation of rectangular g.s.s. ducting with ms angle flanges , complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc.make : jindal / tata24g, duct thermal insulationsupply and fixing of external duct insulation with 19 mm thick closed cell elastomeric nitrile rubber covered with 24g aluminium cladding., duct thermal insulationsupply and fixing of internal duct insulation with 12 mm thick closed cell elastomeric nitrile rubber anti microbial, painting of ducts with one coat of zinc chromate yellow primer and 2 coats of enamel paint of approved colour., supply and installation of 32 mm diameter drain piping using upvc pipes along with necessary fittings .make : tata / jindal, supply and fixing of fusible link type fire damper ( sleeve mounted ) make : ruskin / greenheck, supply and fixing of extruded aluminium duct mounted volume control dampersmake : systemair / vj air, supply and fixing of extruded aluminium double deflection type supply air grilles with volume control dampers make : systemair / vj air, providing and fixing for ms support structure for laying of duct from garden to inside temple along horizontal and vertical runs upto the height including cutting, welding etc., and applying two coats of red oxide and two coats of synthetic enamelled paint of colour and shade as directed by engineer in charge. the design of the support structure shall be done and also to get the approval from the site incharge, buy back of old ahu 1 no , out door units ( 7.5 tr x 2nos and other related piping, ducting etc ) , comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for first year after warranty period of 2 years, comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for second year after warranty period of 2 years, comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for third year after warranty period of 2 years...

Tirumala Tirupati Devasthanams - Andhra Pradesh

33562754 revamping of existing ductable ac system in sri kalyana venkateswara swamy temple, srinivasamangapuram , dx type aircooled condensing units: supply , installation , testing and commisioning of 11 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins , condenser fans, etc suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc.make : voltas / blue star / daikin / toshiba / mitsubishi,copper refrigerant pipingsupply, installation and testing of 19 g hard copper piping of following sizes (the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth) including supporting fixtures and accessories etc. complete.7/8 inches dia copper pipe,copper refrigerant pipingsupply, installation and testing of 19 g hard copper piping of following sizes (the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth) including supporting fixtures and accessories etc. complete.1.1/8 inches dia copper pipe with insulation,supply and installation of suitable new thermostatic expansion valve and catch all filter driers along with necessary fittingsmake : sporlan / alco,providing of r 407c refrigerant,supply and installation of microprocessor based electrical panel with suitable rating incoming mccb with digital kwh meter and outgoing feeders with suitable rating mcbs to the 3 no.s 11 tr condensing units and 1 no. ahu .make : softhard / bluevolt,supply and laying power / control cabling of following sizes.make : finolex / polycabpower cabling from panel to condensing units (compressor) 3c x 6 sqmm copper armoured,supply and laying power / control cabling of following sizes.make : finolex / polycabpower cabling from panel to ahu fan motor 3c x 4 sqmm copper armoured,supply and laying power / control cabling of following sizes.make : finolex / polycabpower cum control cabling from panel to condensing unit (condenser fans plus control) 7c x 1.5 sqmm copper armoured,supply and laying power / control cabling of following sizes.make : finolex / polycabcontrol cabling between thermostat and panel 3c x 1.5 sqmm copper armoured,supply, transportation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling / wall with suspenders etc., complete (nb: add 30% extra for perforated cable tray with cover) 100mm x 50mm x 1.6mm,supply, transportation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling / wall with suspenders etc., complete (nb: add 30% extra for perforated cable tray with cover) 300mm x 50mm x 1.6mm,earthing 8 swg gi wire,air handling unit (ahu)supply , installation , testing and commissioning of new air handling unit (horizontal floor mounted) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin , thermal break aluminium profile with thermal barrier , 43mm thick puf panels . the air handling unit shall consist of face mounted 50mm thick 20 micron filters , coil section with 6 rows deep 3 circuit interlaced dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.i. casing , suitable number of distributors , 18g ss 304 drain pan duly insulated with 13mm closed cell nitrile rubber insulation , fan section with didw centrifugal fan , eff2 motor . the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminium volume control damper at outlet . the face velocity across coils and filters shall be maximum 500 fpm. the fans shall be selected considering a maximum outlet velocity of 10 m/s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from thefilters fixed in the ahu , one additional set of spare filters shall also be provided. capacity 4300 cfm airflowrate at the rate of 60 mmwc static make : flaktwoods / systemair/ sagar air fan : nicotra / kruger , motor : crompton / abb,air handling unit (ahu)dismantling and shifting of existing 1 no. of 15tr air handling unit along with its air cooled condenser.,supply and installation of rectangular g.s.s. ducting with ms angle flanges , complete with gaskets and supporting arrangement using ms angles/gi threaded rods etc.make : jindal / tata24g,duct thermal insulationsupply and fixing of external duct insulation with 19 mm thick closed cell elastomeric nitrile rubber covered with 24g aluminium cladding.,duct thermal insulationsupply and fixing of internal duct insulation with 12 mm thick closed cell elastomeric nitrile rubber anti microbial,painting of ducts with one coat of zinc chromate yellow primer and 2 coats of enamel paint of approved colour.,supply and installation of 32 mm diameter drain piping using upvc pipes along with necessary fittings .make : tata / jindal,supply and fixing of fusible link type fire damper (sleeve mounted)make : ruskin / greenheck,supply and fixing of extruded aluminium duct mounted volume control dampersmake : systemair / vj air,supply and fixing of extruded aluminium double deflection type supply air grilles with volume control dampers make : systemair / vj air,providing and fixing for ms support structure for laying of duct from garden to inside temple along horizontal and vertical runs upto the height including cutting, welding etc., and applying two coats of red oxide and two coats of synthetic enamelled paint of colour and shade as directed by engineer in charge. the design of the support structure shall be done and also to get the approval from the site incharge,buy back of old ahu 1 no , out door units ( 7.5 tr x 2nos and other related piping,ducting etc),comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for first year after warranty period of 2 years,comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for second year after warranty period of 2 years,comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for third year after warranty period of 2 years...

Tirumala Tirupati Devasthanams - Andhra Pradesh

33276762 revamping of existing ductable ac system in sri kalyana venkateswara swamy temple, srinivasamangapuram , dx type aircooled condensing units: supply , installation , testing and commisioning of 11 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins , condenser fans, etc suitable for operating on eco friendly refrigerant r 407c including necessary accessories like rubber pads etc.make : voltas / blue star / daikin / toshiba / mitsubishi,copper refrigerant pipingsupply, installation and testing of 19 g hard copper piping of following sizes (the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth) including supporting fixtures and accessories etc. complete.7/8 inches dia copper pipe,copper refrigerant pipingsupply, installation and testing of 19 g hard copper piping of following sizes (the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth) including supporting fixtures and accessories etc. complete.1.1/8 inches dia copper pipe with insulation,supply and installation of suitable new thermostatic expansion valve and catch all filter driers along with necessary fittingsmake : sporlan / alco,providing of r 407c refrigerant,supply and installation of microprocessor based electrical panel with suitable rating incoming mccb with digital kwh meter and outgoing feeders with suitable rating mcbs to the 3 no.s 11 tr condensing units and 1 no. ahu .make : softhard / bluevolt,supply and laying power / control cabling of following sizes.make : finolex / polycabpower cabling from panel to condensing units (compressor) 3c x 6 sqmm copper armoured,supply and laying power / control cabling of following sizes.make : finolex / polycabpower cabling from panel to ahu fan motor 3c x 4 sqmm copper armoured,supply and laying power / control cabling of following sizes.make : finolex / polycabpower cum control cabling from panel to condensing unit (condenser fans plus control) 7c x 1.5 sqmm copper armoured,supply and laying power / control cabling of following sizes.make : finolex / polycabcontrol cabling between thermostat and panel 3c x 1.5 sqmm copper armoured,supply, transportation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling / wall with suspenders etc., complete (nb: add 30% extra for perforated cable tray with cover) 100mm x 50mm x 1.6mm,supply, transportation and installation of following sizes of hot dipped galvanized iron perforated cable trays without cover, including horizontal and vertical bends, reducers tees, cross members and other accessories as required and duly suspended from the ceiling / wall with suspenders etc., complete (nb: add 30% extra for perforated cable tray with cover) 300mm x 50mm x 1.6mm,earthing 8 swg gi wire,air handling unit (ahu)supply , installation , testing and commissioning of new air handling unit (horizontal floor mounted) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin , thermal break aluminium profile with thermal barrier , 43mm thick puf panels . the air handling unit shall consist of face mounted 50mm thick 20 micron filters , coil section with 6 rows deep 3 circuit interlaced dx cooling coil of 12.5 mm od copper tubes with aluminium fins and g.i. casing , suitable number of distributors , 18g ss 304 drain pan duly insulated with 13mm closed cell nitrile rubber insulation , fan section with didw centrifugal fan , eff2 motor . the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminium volume control damper at outlet . the face velocity across coils and filters shall be maximum 500 fpm. the fans shall be selected considering a maximum outlet velocity of 10 m/s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from thefilters fixed in the ahu , one additional set of spare filters shall also be provided. capacity 4300 cfm airflowrate at the rate of 60 mmwc static make : flaktwoods / systemair/ sagar air fan : nicotra / kruger , motor : crompton / abb,air handling unit (ahu)dismantling and shifting of existing 1 no. of 15tr air handling unit along with its air cooled condenser.,supply and installation of rectangular g.s.s. ducting with ms angle flanges , complete with gaskets and supporting arrangement using ms angles/gi threaded rods etc.make : jindal / tata24g,duct thermal insulationsupply and fixing of external duct insulation with 19 mm thick closed cell elastomeric nitrile rubber covered with 24g aluminium cladding.,duct thermal insulationsupply and fixing of internal duct insulation with 12 mm thick closed cell elastomeric nitrile rubber anti microbial,painting of ducts with one coat of zinc chromate yellow primer and 2 coats of enamel paint of approved colour.,supply and installation of 32 mm diameter drain piping using upvc pipes along with necessary fittings .make : tata / jindal,supply and fixing of fusible link type fire damper (sleeve mounted)make : ruskin / greenheck,supply and fixing of extruded aluminium duct mounted volume control dampersmake : systemair / vj air,supply and fixing of extruded aluminium double deflection type supply air grilles with volume control dampers make : systemair / vj air,providing and fixing for ms support structure for laying of duct from garden to inside temple along horizontal and vertical runs upto the height including cutting, welding etc., and applying two coats of red oxide and two coats of synthetic enamelled paint of colour and shade as directed by engineer in charge. the design of the support structure shall be done and also to get the approval from the site incharge,buy back of old ahu 1 no , out door units ( 7.5 tr x 2nos and other related piping,ducting etc),comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for first year after warranty period of 2 years,comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for second year after warranty period of 2 years,comprehensive annual maintenance charges of ac plant after warranty period of 2 years for srinivasa mangapuram temple amc charges for third year after warranty period of 2 years...

Tirumala Tirupati Devasthanams - Andhra Pradesh

32299350 providing centralized air conditioning system and amc for a period of 3 years to the sri venkateswara swamy divyakshethram at venkata palem, amaravathi in guntur district ( part ab ) , dx type aircooled condensing units supply , installation , testing and commissioning of 11 tr nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminum fins , condenser fans, etc. suitable for operating on ecofriendly refrigerant r 407c including necessary accessories like rubber pads etc. make : voltas / blue star / carrier warranty: one year from the date of installation for entire system, copper refrigerant piping: supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 7 / 8 inche dia copper pipe, copper refrigerant piping: supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete.1.1 / 8 inches dia copper pipe with insulation, supply and installation of suitable new thermostatic expansion valve and catch all filter driers along with necessary fittings. make: sporlan / alco, providing of r 407c refrigerant, supply and installation of microprocessor based electrical panel with suitable rating incoming mccb with digital kwh meter and outgoing feeders with suitable rating cbs to the 3 nos. 11 tr condensing units and 1no. ahu make :softhard / bluevolt, supply and laying power / control cabling of following sizes.power cabling from panel to condensing units ( compressor ) 3c x 6 sqmm copper armoured make : finolex / polycab, supply and laying power / control cabling of following sizes power cabling from panel to ahu fan motor 3c x 4 sqmm copper armoured make : finolex / polycab, supply and laying power / control cabling of following sizes power cum control cabling from panel to condensing unit ( condenser fans + control ) 7c x 1.5 sqmm copper armoured make : finolex / polycab, supply and laying power / control cabling of following sizes control cabling between thermostat and panel 3c x 1.5 sqmm copper armoured make : finolex / polycab, supply and installation of hot dipped galvanized cable trays 100 mm wide perforated type, supply and installation of hot dipped galvanized cable trays 300 mm wide perforated type, earthing :8 swg gi wire, air handling unit ( ahu ) :supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin, thermal break aluminum profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, coil section with 6 rows deep 3 circuit interlaced dx cooling coil of 12.5 mm od copper tubes with aluminum fins and g.i. casing, suitable number of distributors, 18g ss 304 drain pan duly insulated with 13mm closed cell nitrile rubber insulation, fan section with didw centrifugal fan, eff2 motor. the air handling units shall consist of suitable vibration isolators, access door, gss channel base frame and aluminum volume control damper at outlet. the face velocity across coils and filters shall be maximum 500 fpm. the fans shall be selected considering a maximum outlet velocity of 10 m / s. fire retardant type flexible duct connector and vibration isolation rubber pads shall also be provided. the ahu shall be suitable for outdoor installation with canopy. apart from the filters fixed in the ahu, one additional set of spare filters shall also be provided. capacity 4300 cfm airflow rate at 60 mmwc static make : flaktwoods / systemair fan : nicotra / kruger , motor : crompton / abb, supply and installation of rectangular g.s.s. ducting with ms angle flanges , complete with gaskets and supporting arrangement using ms angles / gi threaded rods etc. make : jindal / tata 24g, duct thermal insulation supply and fixing of external duct insulation with 19 mm thick closed cell elastomeric nitrile rubber covered with 24g aluminum cladding., duct thermal insulation supply and fixing of internal duct insulation with 12 mm thick closed cell elastomeric nitrile rubber anti microbial., painting of ducts with one coat of zinc chromate yellow primer and 2 coats of enamel paint of approved color., supply and installation of 32 mm diameter drain piping using upvc pipes along with necessary fittings. make: tata / jindal, supply and fixing of fusible link type fire damper ( sleeve mounted ) make: ruskin / greenheck, supply and fixing of extruded aluminum duct mounted volume control dampers. make: systemair / vj air, supply and fixing of extruded aluminum double deflection type supply air grilles with volume control dampers make : systemair / vj air, amc of centralised ac system for 2nd year ( after warrenty period ) as per scope of work in boq, amc of centralised ac system for 3rd year ( after warrenty period ) as per scope of work in boq, amc of centralised ac system for 4th year ( after warrenty period ) as per scope of work in boq...

Indian Institute Of Technology - Andhra Pradesh

29953994 supply of extruded aluminium frame profile supply of extruded aluminium frame profile , supply ofextruded aluminium frame profile , supply of extruded aluminium profile 8 80 x80 light, natural, length = 2200, 8.80 metres effective length as per the specifications of the tender , supply ofextruded aluminium profile 8 80 x80 light, natural, length = 1600, 9.60 metres effective length as per the specifications of the tender , supply ofextruded aluminium profile 8 80 x80 light, natural, length = 2100, 16.80 metres effective length as per the specifications of the tender , supply ofextruded aluminium profile 8 80 x80 light, natural, length = 760, 9.12 metres effective length as per the specifications of the tender , supply ofaluminium angle bracket set 8 40x40 zn as per the specifications of the tender , supply of automatic fastening set 8, bright zinc –plated as per the specifications of the tender , supply of base plate / transport plate 8 80x80, m10, schwarz as per the specifications of the tender , supply of knuckle foot d 60, m10x120, black as per the specifications of the tender , supply ofcap 8 80x80, black as per the specifications of the tender as per the specifications of the tender , supply oft slot nut 8 st m6, bright zinc plated as per the specifications of the tender , supply ofm6x16, counter sunk socket head screw, zinc plated as per the specifications of the tender , supply of aluminium sheet ( 4 mm thick ) , 2058x879 including laser cutting and machining as per the specifications of the tender...

East Coast Railway - Andhra Pradesh

27646892 supply of modular workstations: with 50mm thick aluminum profiles powdered coated modular single liner workstationmodular workstations: with 50mm thick aluminum profiles powdered coated modular single liner workstation,modular workstations: with 50mm thick aluminum profiles powdered coated modular single linerworkstation, with 25mm thick pvc edge bended pre laminate particle board table tops, along with one mark boardand one pinup board, wooden cpu trolley, keyboard tray, 3 drawer pedestal unit of size: 650hx400wx450d.size:1200x600x725 /1200(h) as per layout drawing and specifications enclosed. make: m/s godrej, m/sfebritrak, m/s r. p. enterprises, m/s sr smith m/s epl modular or similar....

South Central Railway - Andhra Pradesh

21660296 supply of aluminium profile for led light,, aluminium profile for led light,led shelf lighting,led cabinet lighting recessed mounted profile for led strip,anodized aluminium finish milky diffuser,with side caps and screw come as an accessory with the light dimensions width 22mm height 12mm length 1000mm make:noble or equivalent....

South Central Railway - Andhra Pradesh

21447822 tender for aluminium profile for led light,item list : (1) aluminium profile for led light,led shelf lighting,led cabinet lighting recessed mounted profile forled strip,anodized aluminium finish milky diffuser,with side caps and screw come as an accessory with thelight dimensions width 22mm height 12mm length 1000mm make:noble or equivalent....

South Central Railway - Andhra Pradesh

21139260 tender for aluminium profile for led light,item list : (1) aluminium profile for led light,led shelf lighting,led cabinet lighting recessed mounted profile forled strip,anodized aluminium finish milky diffuser,with side caps and screw come as an accessory with thelight dimensions width 22mm height 12mm length 1000mm make:noble or equivalent....

South Central Railway - Andhra Pradesh

20705163 tender for aluminium profile for led light,item list : (1) aluminium profile for led light,led shelf lighting,led cabinet lighting recessed mounted profile forled strip,anodized aluminium finish milky diffuser,with side caps and screw come as an accessory with thelight dimensions width 22mm height 12mm length 1000mm make:noble or equivalent....

South Central Railway - Andhra Pradesh

20270640 supply of aluminium profile for led light, item list : ( 1 ) aluminium profile for led light, led shelf lighting, led cabinet lighting recessed mounted profile for led strip, anodized aluminium finish milky diffuser, with side caps and screw come as an accessory with the light dimensions width 22mm height 12mm length 1000mm make:noble or equivalent....

South Central Railway - Andhra Pradesh

20107648 tender for aluminium profile for led light,item list : (1) aluminium profile for led light,led shelf lighting,led cabinet lighting recessed mounted profile forled strip,anodized aluminium finish milky diffuser,with side caps and screw come as an accessory with thelight dimensions width 22mm height 12mm length 1000mm make:noble or equivalent....

South Central Railway - Andhra Pradesh

20006885 tender for aluminium profile for led lightitem list : (1) aluminium profile for led light,led shelf lighting,led cabinet lighting recessed mounted profile forled strip,anodized aluminium finish milky diffuser,with side caps and screw come as an accessory with thelight dimensions width 22mm height 12mm length 1000mm make:noble or similar...