30132360
supply of furniture items to government polytechnic at madakasira ( v ) ( m ) in ananthapuram district, estimate cost: rs. 50.00 lakhs 1 1.00 supply, delivery and assembling at site principal table as shown in the drawing with the following specifications:made out of 25mm thick prelaminated particle board top jointed togehter with 18mm thick plb at bottom so as to make 43mm edge effect and half round edge with pvc beedings. front panel made out of 18mm plb. side panels 18mm thick plb with 43 mm edge effect. size of main table ; 1800 l x { 800 w ( edges ) 900 w ( centre ) } x 780 h. accessories: side cabinet 1200 l x 565 w x 690 h with sliding doors lockable and one partition making 2 compatments.3 drawer mobile pedestal size: 450 l x 620 w x 690 h. pre laminated particle board design pattern for side unit& mobile pedestal should be as per the main table unit made with grade ii type ii conforming to is:12823 of approved quality and shade.the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges , exclusive of all taxes, complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 2 10.00 office tables 1500 mm x 590 mm x 750 mm, 18mm thick with pre laminated board, both sides drawer units the table top should be 18mm thick with pre laminated board ( plb ) , of approved quality and shade, grade ii type ii conforming to is:12823. the edges should be sealed with 2mm thick hot preessesd pvc beading. the understructure should be top frame c section 40 x 40 mm 1 mm thickness supported alround tubular frame of cr round tube of 25.4 mm , 1.2mm thick confirming to is 513. the tubular frame should be made of cr round tube of dia 25.4mm, 1.2mm thick. for storage, the table should have 3 drawer unit the overall dimention 350 ( w ) x 430 ( h ) x 560 ( d ) mm in which the shell and drawer tray shall be 0.5 mm thick crca ms, drawer front of 0.8 mm thick crca ms sheet, provided with 6 lever cam lock and in built plastic handles. steel should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per is std 3618 1996.epoxy polyster powder coating as per is101. the total cost of unit shall include cost of all materials, manufacture, transportation to site assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes. complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 3 10.00 supply, delivery and assembling at site staff table as shown in the drawing with the following specifications: the over all dimension should be 1200 mm x 590 mm x 750 mm. the table top should be 18mm thick with pre laminated board ( plb ) , of approved quality and shade, grade ii type ii conforming to is:12823. the edges should be sealed with 2mm thick hot preessesd pvc beading. the understructure should be top frame c section 40 x 40 mm 1 mm thickness supported alround tubular frame of cr round tube of 25.4 mm , 1.2mm thick confirming to is 513. the tubular frame should be made of cr round tube of dia 25.4mm, 1.2mm thick. for storage, the table should have 3 drawer unit the overall dimention 350 ( w ) x 430 ( h ) x 560 ( d ) mm in which the shell and drawer tray shall be 0.5 mm thick crca ms, drawer front of 0.8 mm thick crca ms sheet, provided with 6 lever cam lock and in built plastic handles. steel should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per is std 3618 1996.epoxy polyster powder coating as per is101. the total cost of unit shall include cost of all materials, manufacture, transportation to site assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes. complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 4 10.00 supply, delivery and assembling at site computer table as should be drawn with following specification. overall dimensions should be 750mm ( l ) x 450 mm ( w ) x 750 mm ( h ) . the table top should be 25mm thickness with prelaminated particle board of confirming to is 12823. the all edges should be of wood beading keyboard of size 600mm ( l ) x 200mm ( w ) with box type model, telephonic channel 18mm prelaminated particle board, with bottom cpu stand l type shape with back support 18mm prelaminated particle board of cpu stand size 650mm x 450mm x 200mm l type and two legs inside between 18mm prelaminated particle board fitted including all charges and taxes as per rules exclusive of all taxes 5 50.00 supply, delivery and assembling at site computer tables for students with the following specifications: the over all dimentions of the table shall be 1800x450 x750mm. the table top is to be 25 mm thick, pre laminated board ( plb ) , grade ii type ii conforming to is:12823 of approved quality and shade and edges shall be half rounded and sealed with 2mm thick hot preessesd pvc beading. the c frames shall be 1.6 mm thick m.s, supporting the top. the legs 6 no.s shall be of dia. 38.1, 1.6 mm thick m.s erw tube. the table also should consist of 2 foot rests of size 50 x 25mm thick with 2 internal support and it should be connected to legs. steel should be as per is 513, should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per is: 3618 1996. epoxy polyster powder coating 45 dft as per is 101.the keyboard tray 2 no.s shall be of size 710mm ( front width ) x 300mm ( depth ) approximately is to be provided with end fittings mad from minimum 2mm thick ms steel mounted on either side and the keyboard tray shall be easily slideable, provided with two telescopic channels with balls. the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 6 25.00 supply, delivery and assembling at site reading / demo tables as shown in the drawing with the following specifications:the over all dimentions of the table shall be 1800x900x740mm. the table top is to be 25 mm thick, pre laminated board ( plb ) , grade ii type ii conforming to is:12823 of approved quality and shade and edges shall be half rounded and sealed with 2mm thick hot preessesd pvc beading. the c frames shall be 1.6 mm thick m.s, supporting the top. the legs shall be of dia. 38.1, 1.6 mm thick m.s erw tube. the table also should consist of 2 foot rests of size 50 x 25mm thick with 2 internal support and it should be connected to legs as shown in drawing. steel should be as per is 513, should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per is: 3618 1996. epoxy polyster powder coating 45 dft as per is 101. the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 7 25.00 supply, delivery and assembling at site tables for classrooms as shown in the drawing with the following specifications: the over all dimension should be 900 mm x 590 mm x 740 mm. the table top has to be made of 18 mm thick. pre laminated board ( plb ) , of approved quality and shade, grade ii type ii conforming to is:12823. the edges should be rounded duly sealed with 2mm thick hot preessesd pvc beading. the understructure should have an alround supporting c frame made of cold rolled cold annaled ( crca ) ms sheet 0.9 mm thick confirming to is 513. the stands for table should be made of tubular frame of ms erw square tube of size 25.4mm, 1.2mm thick. modesty pannel of 600mm height from top of the table with 1.0 mm thick crca ms sheet. steel used should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per is 3618 1996. epoxy polyster powder coating dft ( dry film thickness ) of 45 microns as per is101.the total cost of unit shall include cost ofall materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, including vat and all other taxes etc., complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply exclusive of all taxes 8 8.00 lab work table for physics lab size: 2100mm l x 685mm d x 890mm ht table frame to be made out of 50mm x 25 mm x 1.2 mm crca rectangular pipe mounted on 4 vertical supports square section of 50 x 50 x 1.2mm crca pipe. the crca steel frame section to be powder coated oven baked after proper pre treatment. the top of the table should be made from 25 mm thick country wood. the top should be post formed with laminate on the front. the sides of the top should be protected with pvc lipping affixed with hot melt glue.mdf top should be fixed to the frame with the help of 6mm insert nuts & bolts only. the legsshould be provided with rubber shoes to prevent the floor from being damaged.table should be provided with swing door cabinet of size600mm w x 605mm depth x 605mm height on both lhs and rhs, having one removable shelf. storage cabinets to be rested on 50mm x 25mm x 1.2mm frame welded to the vertical supports. a foot rest of 50mm square pipe is also provided. the door should be lockable. the body of the cabinet unit should be made from 0.8mm crca sheet and doors are made from 1mm crca sheet and to be stiffened with hat type stiffener. all the sheet metal parts to be powder coated oven baked after proper pretreatment exclusive of all taxes 9 18.00 supply, installation / fixing & commissioning of laboratory table : testing table: work surface ( as per attached drawing ) the standard table top height is 850 mm ( including table top thickness of 25 mm & 1 mm ms thick sheet ) . the laboratory testing table shall have dimension 2000mm l x 1000mmw x 850mm h from bottom to working top. the table top shall be made of minimum 25 mm thick multilayer – minimum 3 layer laminated ply. the table top shall be fitted over 1 mm thick ms sheet ( powder coating with epoxy, minimum coating thickness 50 60 microns ) . the top shall be factory made, laminated with laminates of minimum 1mm thickness of approved shade as per is 2046 1995. the front edge of the work surface shall be provided with machine pressed 2mm thick pvc lipping / edge binding. the sides of the top frame of table shall have arrangement for fixing electricity switch board. the wiring should be concealed one with raceway cover lock. four nos of switch & socket of 5 / 15 amp rating combined of branded company for power connection with individual indicator lamp & fuse shall be provided as per the drawing. there should be one more raceway channel for data cable on backside of table. the inner side of wooden sheets of the table shall have a backing laminate of minimum 0.6 mm thickness. non working edges of the work surface shall be provided with machine pressed 0.5mm thick pvc lipping / edge binding. one drawer, one door cabinet & one full door cabinet shall be provided as per the attached drawing – using minimum 18mm & 12mm thick boards. drawer shall slide through telescopic channel. the drawers shall move on rolls & rails to avoid jerk impact for the sophisticated instruments. heavy duty door having two automatic hinges and lock with ss finish handle. all the boards shall confirm indian standards is 12823 for prelam boards. the board shall be inert to insect eating up exclusive of all taxes . 10 71.00 drawing steel stool with wooden top , height=762mm :teak wood top: dia 356x 25 mm, s.s pipe dia 25 mm x 16 swg. , across pipe : dia 20 mm at bottom of 4 leg joint across pipe : dia 20 mm at bottom of four leg joint each other with s.s gas wielding all around.across distance between leg should be 500 mm at the outside of the pipe.top should be good quality of wooden polished and finishing. exclusive of all taxes general tolerance: 2mm 11 79.00 small steel stool with wooden top :height 530mm teak wood top: dia 356x 25 mm thick ( in diameter, two pieces joint each other with good quality adhesive ) . leg : s.s pipe dia 25 mm x 16 swg. , across pipe : dia 20 mm at bottom of four leg joint each other with s.s gas wielding all around.across distance between leg should be 500 mm at the outside of the pipe.top should be good quality of wooden polished and finishing. general tolerance: 2mm all dimensions are in mm remaining items are as per attached drawing exclusive of all taxes 12 100.00 supply, delivery and assembling at site duel desks of size 4’ 0” for classrooms as shown in the drawing with the following specifications: the overall dimensions should be of size 1200 mm x 850 mm x 750mm / 800mm. the desk panel ( 1200x330mmx18mm ) , seat ( 1200x260mmx18mm ) and back ( 1200x260mmx18mm ) should be made of 25 mm thick prelaminated board with teak wood beading with fine polish on all sites. the understructure should be made of 25.4 mm x 25.4 mm x 1.6 mm thick powder coated cr square tube frames at base which should be welded to the desk and seat supports that are made of tubular frame of cr square tube of size 25.4mmx25.4mmx1.6mm thick ( 2 ) vertical frames at base and back of seat made of 25.4 mmx25.4mmx1.6mm thick poder coated cr square tubes to be provided with stiffeners between them. these frames should be closed with plastic caps. additional horizontal supports of tubular frame of cr square tube of size 25.4mmx25.4mmx1.6mm thick should be gap bitween two legs for seat and writing pad shallbe 250mm provided below the desk and two supports to seat and back rest to add rigidity to the desk. the frame for seat, back seat and desk should be made with cr square tube of 25.4mmx25.4mmx1.6mm ( 2l+2w ) . two nos of stiffeners of cr square tube of 25.4mmx25.40mmx1.60mm should be placed length wise under seat and 2 nos under desk for rigidity and one stiffener ( width wise ) to be provided on either side at bottom of shelf exclusive of all taxes 13 5.00 supply, delivery and assembling at site executive chair as shown in the drawing with the following specifications: the seat and back shall be made up of 1.2 cm. thick hot pressed plywood, upholsteres with fabric upholstery covers and moulded polyurethane foam having density 45 + / 2 kg / m3 and hardness = 20+ / 2 at 25% compression. the back foam shall be designed with contoured lumbar support for extra comport. the seat shall have extra thick foam on front edge to give comfort to popliteal area. the seat shall be of size 40 cm x48 cm. back rest shall be of size 47.5 cmsx69.5 cms. provision for adjustment of height ( adjustment stroke of 12 cms ) shall be made. the chair shall be attached with one piece armrest, injection moulded from black co polymer polypropylene. the centre tilt synchro mechanism is desined with the following features: 360 degree revolving type, upright position locking, tilt tension adjustment of seat / back tilting ratio 1:3 ( 60 seat tilt / 180 back tilt ) . the frame work made of base cr grade steel strips, thickness 2 mm chromium coated. the construction shall be sturdy and robust. the chair shall be fitted with 5 nos. swivel castors in good quality. the twin wheel castors shall be injection moulded in black nylon. the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloding and assembling charges at different floor levels of the building, exclusive of all taxes., complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 14 40.00 supply, delivery and assembling the site ‘s’ type chairs with arms: seat and back nylon cane netted, seat and back frame made of cr tube 25.4mm, 1.22 mm thickness. seat size 46 cm x 46 cm back size 46 cm ( w ) x 50 cm ( h ) , back is ( curve model ) back size 46cm / 38cm excluding gap the understruture assembly is a cantilever type frame made of cr tube dia 25.4 cm 14 guage 2 mm thickness arms shall be of injection moulded foam poly propylene hands with pvc bush. steel should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per is std 3618 1996. epoxy polyster powder coating plain mat brown as per is 101. the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloding and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 15 100.00 supply, delivery and assembling at site computer chair as should be drawn with following specification. overall dimensions should be 430 mm ( w ) x 450mm ( d ) x 800mm ( h ) with sheet height ( sh ) 460mm. the seat and back shall be made of 1.0mm 20 guage thick cr. perforated sheets. the seat size is 390mm ( w ) x 415mm ( d ) and back size 390mm ( w ) x 215mm ( h ) the made of the understructure frame cr tube of 25.4 mm x 1.6 mm thickness 16 guage, powder coated ( dft 40 60 microns ) . the steel should confirm to is 513 and for durability, steel should undergo pre treatment process and phosphate for better adhesion of paint as per is 3618 1996. chair is with arms exclusive of all taxes. the under structure should be provided with black pp injection moulded ferrules. hard rubber bushes should be provided to rest the chair on floor. epoxy polyster powder coating dft ( dry film thickness ) of 45 microns as per is 101. the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloding and assembling charges at different floor levels of the building, including all taxes ts vat, ap cst and duties etc., complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 16 30.00 supply, delivery and assembling at site almariahs ( plain model storewell ) of size: 1980x900x450 mm, as shown in the drawing with the following specifications: store well shall be 4 nos. fixed shelves of inside shelves size 878 x 420 top bottom lh and rh side and back all parts cr sheet 1 mm thickness with mounting. die cast recess type handle with 3 way locking mechanism should be provided with levelers. mild steel as raw material should be used, cold rolled close annealed steel used for thickess 0.6 to 1.2 mm range as per is – 513 1994 ( reaffirmed in 1998 ) . grade ‘d’ or “dd’ quality. chemical composition, tensile properties, bend rest, surface, flatness, hardness as per is 513 1994. hot rolled steel used for thickness 2.0 to 3.15mm range as per is 1079 1994 ‘d’quality or is 10748 1995 grade ii. chemical composition, tensile properties, bend rest, surface flaws, roll mark, dent & lines etc. painting shall be epoxy powder coated paint 55 microns. the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes., complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 17 2.00 wall supporting extendable 12 / 20 ft. alu 1 numbers wall supporting extension 12 / 20 ft. aluminium ladder. aluminium wall supporting extension ladder for electrical / industrial works at a height: # materials of construction: manufactured from high tensile aluminium alloys. # accessories: fitted with manila ropes, pulley, safety locks & solid rubber shoes. # size of aluminium c sections: 66 mm x 31.75 mm× 3.18 mm. outer width :15” , # rungs or steps: 1 dia. non slip corrugated rung pipe at 10 / 12 centre to centre. # other features: should light in weight, fire proof & dust proof. # heights: closed position 12 ft. and extended position 20 ft. in 2 sections. # conforms to is 733 and is 1285 # ø minimum load bearing capacity : approx 150kgs exclusive of all taxes 18 1.00 supply, delivery and assembling of podium of size 700 ( w ) x 600 ( b ) x1200 ( h ) inner material is made up of high density mdf with fine surface of papaer spray paint with high quality, fine workmanship and fashionable design, unique material combination, simple colour matching, smooth, bright lines and sides as per the isomertic view shown in the plan . the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges , exclusive of all taxes complete for finished item of work and as directed by engineer in charge. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 19 80.00 student classroom chair with writing pad , specifications: ( a ) weight: 7.5 8 kg ( b ) height: 80 cms, seat width 40.5 cms, overall width 60 cm ( c ) perforated 20 gauge sheet backrest and bottom seat. ( d ) main frame made of wrought ironpipe dia 18.5 mm ( 3 / 4 inch ) . ( e ) fine quality black spray painted. ( f ) seat stiffened by `h` shaped 2.5 cm wide and 2.5 mm thickiron strip welded beneath bottom seat. ( g ) back rest strongly welded at 5 points. ( h ) seat strongly welded at 8 different points all around. ( i ) fine grinding without leaving any metal drops / spots. ( j ) sheet 20 gauge, pipe used 18.75 mm dia. ( k ) writing pad size as per diagram m ) price quoted be inclusive of all taxes. exclusive of all taxes 20 40.00 supply, delivery and assembling the site ‘s’ type chairs without arms: seat and back nylon cane netted, seat and back frame made of cr tube 25.4mm, 1.22 mm thickness. seat size 46 cm x 46 cm back size 46 cm ( w ) x 50 cm ( h ) , back is ( curve model ) back size 46cm / 38cm excluding gap the understruture assembly is a cantilever type frame made of cr tube dia 25.4 cm 14 guage 2 mm thickness arms shall be of injection moulded foam poly propylene hands with pvc bush. steel should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per is std 3618 1996. epoxy polyster powder coating plain mat brown as per is 101. the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloding and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 21 4.00 rack journal display wooden: open 1500mm ( h ) x 950mm ( w ) x 300 mm ( d ) with 12 boxes ( as shown in the diagram ) , made of laminated board. there will be an arrangement ( flap style ) for housing the old magazines / journals inside each box. exclusive of all taxes 22 10.00 supply, delivery and assembling at site glass door storewel of size: 1830 x 916 x 486 mm, as shown in the drawing with the following specifications: glass door storwel madeup of ms crca steel grade d as per is 513: 1994 and made of multi bend construction and inter locking design and full height length over lapping doors and sides, with two way bolting mechanism and see through glassdoor, anti corrosive treated components and oven baked powder coating process. it should consists of removable rh & lh sides and back material thickness 0.9 mm. removable rh & lh see through glass main door material thickness 0.9 mm, with 4 plain adjustable shelves of thickness 0.8mm and 3mm thick see through glass ( 4 nos ) . the chemical composition, tensile properties, bend test, surface , flatness, hardnes shall be as per is 513:1994. steel should undergo pre treatment process viz, degreasing, pickling, phosphating etc for rust resistance and durability as per is 3618 :1996. epoxy polyster powder coating min 40 dft as per is:101. the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 23 30.00 supply, delivery and assembling at site slotted angle racks of size 1800x900 x 450mm. the panels shall be of size 900x450mm. each panel shall withstand a load of 100 kg / sqmt udl. the angles of size 40x40x2mm shall be in a single piece of length 6, without joints and shall confirm to is: 5986 ( st 42 ) . open racks with side straps on two sides ( left and right ) , 150mm heigh. the panels shall be made up of mild steel sheets, not less than 0.8 mm thick and shall confim to is 513 d. epoxy polyester powder coating of bs grey colour and shade shall be applied to all components with an average dry film thickness of not less than 35 microns.the total cost of unit shall include cost of all materials, manufacture, transportation to site, assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes. complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 24 9.00 the chair should be revolving chair with permanent contact mechanism, 360 digree swivel, 14 digree back tilt, tilt tension adjustment, upright locking, pneumatic height adjustment. size: 70cm w x 70cm d x 98cm h ( minimim ) – 111cm h ( maximum ) . seat / back should be made up of 1.2 1.5cm thick hot pressed plywood, upholstered with fabric and moulded polyurethane foam ( moulded with density = 45 50 + / kg / m3 and hardness = 20 22 + / 2 ) together with moulded seat and back covers. the back foam should be designed with contoured lumbar support for extra comfort. size of back should be 43cm w x 46cm h ( approx ) , seat size : 47cm w x 50cm d ( approx ) . armrests should be made of black integral skin polyurethane and reinforced with mild steel. the armrests should be fixed to black powder coated armrest bracket made of 0.5 0.6 cm thick hot rolled steel fitted with claddings made of injection moulded polypropylene. pedestalis fabricated from 0.2 .03cm thick colled rolled steel. and 5 nos. twin castor wheels. or near equivalent 25 100.00 supply, delivery at site plastic chair of standard size of standard make with arms. the total cost of unit shall include cost of all materials, manufacture, transportation to site including loading, unloding and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) from the date of supply 26 100.00 plastic chair of standard size of standard make plastic chair without arms the total cost of unit shall include cost of all materials, manufacture, transportation to site including loading, unloding and assembling charges at different floor levels of the building, exclusive of all taxes, complete for finished item of work 27 2.00 supply, delivery and assembling at site notice board. size of 2300 ( w ) x1150 ( h ) x150 ( d ) mm frame work of the medium teak wood front side sliding glasses 6mm thickness with locking arrangement backside 12mm plywood. board inside pine board with wall fitted bracked heavy duty 4 nos. with cloth , with polish fineshed the total cost of unit shall include cost of all materials, manufacture, transportation to site assembling at site including loading, unloading and assembling charges at different floor levels of the building, exclusive of all taxes. all other charges etc., complete for finished item of work. the item shall carry a warranty period of 3 years ( 36 months ) and manufacture defect from the date of supply...
Due Date : December 17, 2021
Tender Value : ₹ 39.77 Lakhs
