29727203
as as to flooring of common area mwo mso newn and cyo corridor workstations equipment furniture and washroom works in bldg no p45 at as as to flooring of common area mwo mso newn and cyo corridor workstations equipment furniture and washroom works in bldg no p45 at comnetcen special repairs to rcc overhead water tank at various building of kalyani and provn of acp cladding at 1.00 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) and disposal of debris and rubbish to outside md land complete all as specified and directed. 2.00 m & l for glazed, coloured, ceramic, joints free tiles of size ( 350mm x 250 mm / 450mm x 350mm / 300mmx450mm ) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 3.00 m & l for non skid, ceramic, coloured tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 4.00 s & f powder coated ( minimum 50 micron ) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. ( note : ( i ) thickness of aluminium section shall not be less than 1.5 mm ) . 5.00 s & f 4.8 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and as directed. 6.00 m & l for use & waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( horizonal or sloping ) for flat rough finished surfaces of concrete complete all as specified and directed. 7.00 m & l for reinforced cement concrete 1:1.5:3, type a 1 ( nominal mix ) ( using 20 mm graded stone aggregate ) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, etc complete all as specified and directed. ( note : reinforcement will be measured & paid seperately ) 8.00 s & f high strength corrosion resistanttmt steel bars 6mm to 8mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. 9.00 dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed. 10.00 s & f 18 / 19 mm thick, plywood, grade bwp, type bb, fixed with screws to timber frame work, etc complete all as specified and directed. 11.00 s & f 0.90 mm thick, decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed. 12.00 s & f continuous ( piano ) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flape when open complete all as specified and directed. 13.00 m & l for vitrified, designed, dark shade coloured ( light shade ) , tiles, 10 mm thick, ( square / rectangular ) polished, area of each tiles not exc 0.36 sqm, in floors, etc including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 14.00 m & l for non skid, ceramic, coloured tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 15.00 taking down existing aluminium aluminium partition of any size and descriptions and and refixing in same position after carry out repair work complete all as specified and directed. 16.00 s & f powder coated ( minimum 50 micron ) anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and anodised aluminium fittings such as peg stay 150mm long ( 01 no ) , hinge type b 21, 100mm long ( 02 nos ) and suitable size of handle complete all as specified and directed. 17.00 demolition of un reinforced cement concrete in ground floors and pavings n.exc 15cm thickness, ( below or above ground level ) and disposal of debris and rubbish to a distance upto outside md land complete all as directed by the engr in charge 18.00 m & l for 25 mm thick, plain cement concrete 1:2:4, type b 0 ( using 12.5 mm graded stone aggregate ) as in sub base of flooring, etc and finished the surface even and rough complete all as specified and directed. 19.00 m & l for preparing old plastered surfaces of walls by complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of alkali resistant priming coat over one or more coat of wall care putty complete all as specified and directed. 20.00 m & l for 12 mm thick, prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. 21.00 s & f 75 mm size hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. 22.00 s & f 100 mm size, stainless steel designer pull handle, fabricated type polished complete all as specified and directed. 23.00 m & l for 18 to 20mm thick granite ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar ( 1:4 ) including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. 24.00 s & f in repairs, towel ring square with round flange including chromium plated brass screws and wooden / plastic cleats etc complete all as specified and directed. ( make: jaquar cat no. acn 1121n or equivelant of make as per list of manufacturers ) 25.00 s & f in repairs, towel rack 600mm long with lower hangers, stainless steel including chromium plated brass screws and wooden / plastic cleats etc complete all as specified and directed. ( make: jaquar cat no. akp 35781ps or equivelant of make as per list of manufacturers ) 26.00 s & f in repairs, 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 27.00 s & f in repair 15 mm bore, hand shower ( health faucet ) ( abs body ) with 8mm dia, 1.2 meter long spirochrome flex tube & wall hook complete all as specified and directed. ( make: jaquar cat no. ald 587 or equivelant of make as per list of manufacturers ) 28.00 s & f in repairs, 15mm bore, bib taps, 2 in 1, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. ( make: jaquar cat no. flr 5041n or equivelant of make as per list of manufacturer ) 29.00 s & f in repair paper holder with flap recessed type ( stainless steel ) fixed to wall with brass screw complete all as specified and directed. ( make: jaquar cat no. ahs 1553 or equivelant of make as per list of manufacturers ) 30.00 s & f in repairs, vitreous cliina wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. 31.00 s & f in repairs, vitreous china wash basin, thin rim table top basin, shape round, size: 480x480x135mm excluding taps etc complete all as specified and directed. ( make : jaquar cat no. ops wht 15901n or equivalent of make as per list of manufacturers ) 32.00 s & f in repair 15 mm bore, pillar taps, single lever tall boy with 150mm extension body fixed spout without popup waste system with 600mm long braided hoses, screwed for iron pipe complete all as specified and directed. ( make: jaquar cat no. flr 5005nb or equivelant of make as per list of manufacturers ) 33.00 s & f in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. 34.00 s & f in repair 15 mm bore, angular stop cock with wall flange, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. ( make: jaquar cat no. kup 35053pm or equivelant of make as per list of manufacturer ) 35.00 s & f in repairs vitreous china urinal, with all fixing accessories set, of size 375 x 315 x 620mm, starwhite with grating and union for discharge pipe ( excluding flushing cistern, flush pipe & waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. ( make: jaquar cat no. urs wht132530 or equivelant of make as per list of manufacturers ) 36.00 s & f in repairs, vitreous china bowl urinal flat back, of size 465x355x265mm, white ( minimum ) with grating and union for discharge pipe ( excluding flushing cistern, flush pipe & waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and directed. 37.00 s & f in repairs vitreous china rimless single piece wc with uf soft close slim seat cover, hinges, fixing accessories, accessories set and cistern fittings, size: 380x725x690 mm, s trap 300 mm and all fittings and fixtures including connection to outgoing drain including making good damaged / disturbed surfaces complete all as specified and directed. ( make: jaquar cat no. ons wht 10853s300ufsm or equivelant of make as per list of manufacturers ) 38.00 s & f in repairs, vitreous china wash down water closet pan ( pedestal pattern ) , white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged / disturbed surfaces complete all as specified and directed. 39.00 s & f in repairs, vitreous china squatting pan, orissa pattern, size 580 x 440 mm white with integral foot rest and p or s trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. 40.00 s & f in repairs, 10 litre capacity, pvc valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed. 41.00 s & f in repair 32 mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. 42.00 s & f in repairs, 32mm dia flexible pvc waste pipe for wash basin / sink etc complete all as specified and directed 43.00 s & f in repairs 5mm thick, bevelled edge looking mirror of size 1200mmx800mm of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and 1st class hard wood designer frame around the mirror with pretruded stainless steel metal studs and fixed to wooden plug with chromiun plated brass screws and cup washers complete all as specified and directed. 44.00 taking up or down 15mm bore, steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. 45.00 taking up or down 20mm bore, steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. 46.00 supply, laying, connection and testing, 15mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. 47.00 supply, laying, connection and testing, 20mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. 48.00 taking down eaves gutters and rainwater / soil / waste pipes ( any size or pattern ) , including all fittings, heads, shoes, bends, swan necks, etc., including removal to store ( measured overall as fixed along the centre line over fittings and accessories ) complete all as specified and directed 49.00 s & f 110 mm bore, pvc ( swr ) , soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc with all necessary fixing arrangement complete all as specified and directed. 50.00 s & f 75 mm bore, pvc ( swr ) , soil waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, etc complete all as specified and directed. 51.00 s & f 110 mm bore, pvc ( swr ) bends of any radius complete all as specified and directed. 52.00 s & f 110 mm bore, pvc ( swr ) bends of any radius with oval access door complete all as specified and directed. 53.00 s & f 75 mm bore, pvc ( swr ) bends of any radius complete all as specified and directed. 54.00 s & f 75 mm bore, pvc ( swr ) bends of any radius with oval access door complete all as specified and directed. 55.00 s & f 110 mm bore, pvc ( swr ) vent cowl complete all as specified and directed. 56.00 s & f in repair 75 mm bore, pvc ( swr ) floor trap, with grating including jointing to waste pipe fixed in cement concrete type b 1 ( 1:2:4 ) complete all as specified and directed. 57.00 m & l for preparation old plastered surfaces of walls of any description over 10 cm width or girth not otherwise described by complete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer over one or more coats of wall care putty to a smooth surface complete all as specified and directed. 58.00 m & l for preparing new surfaces of internal ceiling, etc by complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of alkali resistant primer and over one or more coats of wall care putty to a smooth surface complete all as specified and directed. 59.00 s & f solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. 60.00 demolition of reinforced cement concrete in any position not otherwise specifically provided for and removing rubbish to outside md land complete all as specified and directed. 61.00 s & f high strength corrosion resistant tmt steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. 62.00 m & l for plain cement concrete ( 1:2:4 ) , type b1 ( using 20mm graded stone aggregate ) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed. 63.00 m & l for mild steel hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets ( for securing wire mesh etc. ) including all necessary drilling, bolting or riveting, etc., and similar work conforming to fe 290 gde e 165 ® complete all as specified and directed. 64.00 s & f mild steel screw bolts of 5 to 10 mm diameter of shank ( machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm long complete all as specified and directed. 65.00 m & l for micro concrete ( rendroc rg [ s ] of fosroc ) , mixed with graded coarse aggregate n.exc 12mm in size in propoprtions as per the manufacturers instructions, of any thickness for structural members with and including leak proof form work coated with reabol mould release agent, applying one or more coat of nitozinc primer on the reinforcement steel after cleaning steel surfaces and applying epoxy based nitobond ep for bonding new or old surfaces including providing necessary double scaffolding and removal of the same on completion of the work upto 16th floor complete all as specified and directed. 66.00 m & l for cutting / chipping the spalling concrete surfaces of slabs, beams, columns, fins, facias, parapets & chajjas etc. and trimming, cleaning the surfaces of any thickness to receive guniting / plastering, preparing surfaces and applying a coat of nito bond ar of m / s. fosroc chemicals or equivalent approved bonding agent / epoxy treatment in m / s. sika india pvt. ltd. or m / s. stp ltd. or m / s. choksey chemicals pvt. ltd. or m / s bostik india pvt. ltd. as per manufacturers instructions and providing pressure guniting averaging 25mm thick at a pressure of not less than 6 kg / sq.cm in cement mortar 1:3 duly modifying the mortar with and including suitable bonding agent of m / s. sika india pvt. ltd. or m / s. stp ltd. or m / s. choksey chemicals pvt. ltd. or m / s bostik india pvt. ltd. @ 5% of weight of cement for sides and soffits of slabs, beams, columns, fins, parapets facias & chajjas etc., finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of md land complete all as specified and as directed. 67.00 m & l for cutting / chipping the spalling concrete surfaces of slabs, beams, columns, fins, facias, parapets & chajjas etc. and trimming, cleaning the surfaces of any thickness to receive guniting / plastering, preparing surfaces and applying a coat of nito bond ar of m / s. fosroc chemicals or equivalent approved bonding agent / epoxy treatment in m / s. sika india pvt. ltd. or m / s. stp ltd. or m / s. choksey chemicals pvt. ltd. or m / s bostik india pvt. ltd. as per manufacturers instructions and providing pressure guniting averaging 30mm thick at a pressure of not less than 6 kg / sq.cm in cement mortar 1:3 duly modifying the mortar with and including suitable bonding agent of m / s. sika india pvt. ltd. or m / s. stp ltd. or m / s. choksey chemicals pvt. ltd. or m / s bostik india pvt. ltd. @ 5% of weight of cement for sides and soffits of slabs, beams, columns, fins, parapets facias & chajjas etc., finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of md land complete all as specified and as directed. 68.00 m & l for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed. 69.00 m & l for rendering 15 mm thick in two coats ( 10mm+5mm each ) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturers instructions and finished the surface even and fair without using extra cement complete all as specified and directed. ( note : wpc shall be measured and paid separately against respective item ) . 70.00 supply only integral water proofing compound ( isi marked ) complete all as specified and directed. 71.00 m & l for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. 72.00 m & l for preparation new external surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion ( exterior wall finish ) paint over a coat of primer as per manufacturers instruction complete all as specified and directed. 73.00 m & l for preparation old decorated external surfaces of wall, chajja, facia etc by and applying two coats of water based acrylic weather proof exterior emulsion ( exterior wall finish ) paint complete all as specified and directed. 74.00 s & f 5000 litres capacity rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) , hoisted and fixed in position complete as specified in ssr part i and directed. 75.00 s & f 2000 litres capacity rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) , hoisted and fixed in position complete as specified in ssr part i and directed. 76.00 taking up or down 25 or 32 mm bore, steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. 77.00 taking up or down 40 or 50mm bore, steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. 78.00 taking up or down 80mm bore, steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed. 79.00 supply, laying, connection and testing, 80mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. 80.00 s & f in repairs, 80 mm bore, gun metal gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 81.00 s & f 80 mm bore, ball brass valves, high pressure, with polythene float and fly nuts, screwed for iron pipe or brass ferrule complete all as specified and directed. 82.00 supply, laying, connection and testing, 50mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. 83.00 s & f in repairs, 50 mm bore, gun metal gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 84.00 s & f in repairs, 50 mm bore, ball brass valves, high pressure, with polythene float and fly nuts, screwed for iron pipe or brass ferrule complete all as specified and directed. 85.00 supply, laying, connection and testing, 40mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. 86.00 s & f in repairs, 40 mm bore, gun metal gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 87.00 s & f in repairs, 40 mm bore, ball brass valves, high pressure, with polythene float and fly nuts, screwed for iron pipe or brass ferrule complete all as specified and directed. 88.00 supply, laying, connection and testing, 25mm bore, steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed. 89.00 s & f in repair 25 mm bore, gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 90.00 s & f in repairs, 25 mm bore, ball brass valves, high pressure, with polythene float and fly nuts, screwed for iron pipe or brass ferrule complete all as specified and directed. 91.00 s & f in repairs, 20 mm bore, gun metal gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. 92.00 s & f 1000 litres capacity rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) , hoisted and fixed in position as specified in ssr part i and directed. 93.00 s & f rolled mild steel in plates ( plain or chequered ) channels fo grade fe 410 w ( gde e 250 ) quality a, square cut or notched, forming holes, with riveted, bolted or welded attachmentcomplete all as speicfied and directed. 94.00 s & f mild steel screw bolts of 16 to 20 mm diameter of shank ( machine made ) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm and n exc 10cm long complete all as specified and directed. 95.00 m & l for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to fe.290.gde e 165 ( brackets over 10 kg each to be measured under structural steel ) complete all as specified and directed. 96.00 m & l for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed. 97.00 m & l for preparation & cleaning of old polished wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one or more coat of french polish complete all as specified and directed. 98.00 s & f 3mm thick, plain / designed ( as approved ) , coloured, aluminium composite sheet as in wall cladding / roofing / paneling etc including necessary frame work and fittings and fixtures as per the manufacturers instructions complete all as specified and directed. ( note: work shall be carried out upto 3rd floor height and cost of necessary provisions for the same shall deem to be included in the unit quoted rate ) ...
Due Date : November 26, 2021
Tender Value : ₹ 45.60 Lakhs
