air duct Tenders in Andhra Pradesh

1
Tirumala Tirupati Devasthanams - Andhra Pradesh

39751588 providing wall paneling, false ceiling, furniture, electrification and air conditioning to the existing auditorium in 3rd floor of spmc w in the premises of svims tirupati , providing and supplying optra acoustical wall panelling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for fire reaction class a as per astm e 84, fabric with an option of colors as per tender document as an attachment ( part a civil ) , providing and fixing of forbo flotex color / linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per sqm, fire test en 13501, appearance retention hexapod iso 140 8, friction slip resistance test en 14041 class ds, sanitized anti microbial treatment with resilient waterproof backing as per tender document as an attachment ( part a civil ) , providing and fixing of mineral fibre acoustical suspended ceiling system with 19mm thick microlook 90 edge tiles with 15mm face exposed grid. as per tender document as an attachment ( part a civil ) , non combustible heradesign wood wool superfine a2 acoustic ceiling system 600 x 1200 x 25 mm as per tender document as an attachment ( part a civil ) , supply and fixing of seats with the following specifications ( godrej make ) 1 ) seat / back the seat sub assembly is made up of 1.2 plus or minus 0.1 cm. thk ply wood, upholstered with polyester fabric over moulded foam and covered with an injection moulded polypropylene outer cover. as per tender document as an attachment ( part a civil ) , front overhead speakers, brand: ev, model no: ekx 12 specifications: sitc 12inches1400 w ( peak ) , 131 db peak spl, 90degrees x 60degrees pattern for best coverage on mid size stages. 40degrees monitor angle frequency, range ( 10 db ) 55 hz 20 khz ( full space measurement ) as per tender document as an attachment ( part b pa system ) , subwoofer brand: ev model no: ekx 18s specifications: sitc 18inches 1600 w ( peak ) , 134 db peak spl, frequency range ( 10 db ) 35 hz 300khz ( half space frequency response ( 3 db ) 50 hz 100hz ( half space measurement ) speaker type subwoofer as per tender document as an attachment ( part b pa system ) , power amplifier brand: dynacord model no. l3600fd specifications:sitc live 2 x 1800 w with inbuilt dsp compete with fir filters, audio limiters, output delay per channel, 31 band geq per channel, peq per channel, load impedance and having pc remote control option as per tender document as an attachment ( part b pa system ) , powered stage monitors brand: ev model no. ekx 12p specifications: sitc 12inches powered loud speaker, smart dsp features best frequency response ( 3 db ) 60 hz 18 khz1 frequency range ( 10 db ) 50 hz 20 khz1 maximum spl 132 db2, coverage ( h x v ) 90inches x 60inches power rating 1500 w as per tender document as an attachment ( part b pa system ) , music source usb / sd / mp3 player with fm tuner brand: bosch model no. ple sdt specifications:mp3 playback from sd card and usb inputs plena easy line sd tuner bgm source as per tender document as an attachment ( part b pa system ) , corded vocal microphone brand:ev model no. pl24s specifications:sitc of corded vocal microphone with dynamic neodymium magnet microphone element, with frequency response 80hz 16khz, super cardioid polar pattern, sensitivity of 2.2mv / pa and output impedance 600 ohm. must have on / off switch. as per tender document as an attachment ( part b pa system ) , corded instrument microphone brand: ev model no. pl37 specifications:sitc of corded instrument microphone with self biased condenser microphone element, with frequency response of 55hz 16khz , cardioid polar pattern, sensitivity of 5.5mv / pa, rated impedance of 200 ohm, maximum spl :130db spl and dynamic range 107db as per tender document as an attachment ( part b pa system ) , wireless handheld microphone brand ev model no r300hd specifications designed for the entry level professional, the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , wireless lepel microphone brand: ev model no. r300 l specifications designed for the entrylevel professional, the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , wireless head worn microphone brand ev model no r300e specifications designed for the entry level professional the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , gooseneck microphone brand: ev model no. re90p 18 specifications: sitc of freestanding gooseneck mic with base for podium having back electret condenser microphone element, hyper cardioid polar pattern, led status display as per tender document as an attachment ( part b pa system ) , speaker mountings suitable to the speakers specifications: sitc of fabricated speaker mounts as per tender document as an attachment ( part b pa system ) , mike table stand specifications: sitc mike table stand as per tender document as an attachment ( part b pa system ) , microphone desk stands specifications: sitc microphone desk stands as per tender document as an attachment ( part b pa system ) , microphone floor stands brand: ev specifications: microphone floor stands as per tender document as an attachment ( part b pa system ) , mixer brand: sound craft model no. signature 16 specifications: sitc 16 channel mixing console as per tender document as an attachment ( part b pa system ) , microphone cable brand: belden specifications: sitc of 2 core shielded microphone cable. as per tender document as an attachment ( part b pa system ) , speaker cable brand: finolex specifications: sitc of 2 core 2.5 sqm speaker cable as per tender document as an attachment ( part b pa system ) , equipment rack brand: d link / netrack / netfox model no. 24u specifications: sitc of 24 u equipment rack as per tender document as an attachment ( part b pa system ) , audio recorder brand: sony specifications: audio recorder as per tender document as an attachment ( part b pa system ) , connectors brand: neutrik specifications: sitc of xlr / phono socket / rca / p38 / ep connectors as per tender document as an attachment ( part b pa system ) , premium quality led parcan light with latest rdm technology for user friendly operation with below specifications: light source : single cob led source as per tender document as an attachment ( part c electrical lighting work ) , premium quality led blinder effect light with latest rdm technology for user friendly operation with below specifications: light source : quad led cob source as per tender document as an attachment ( part c electrical lighting work ) , premium quality led par light with latest rdm technology for user friendly operation with below specifications: base color rgbw color mixing, led configuration: multiple nos individual rgbw led configuration, power cable: 3 core 1 sq.mm. copper pvc insulated as per tender document as an attachment ( part c electrical lighting work ) , premium quality led profile spot light with latest rdm technology for user friendly operation with below specifications: light source : single led cob source as per tender document as an attachment ( part c electrical lighting work ) , 150w led beam, spot, wash moving light with rdm protocol and hi grade plastic body black color with following specifications led : 150w as per tender document as an attachment ( part c electrical lighting work ) , ce certified 300w led follow spot light 3200k with rdm / dmx protocol and die cast body duly epoxy polyester powder coated in black matt texture finish with following specifications led : 300w cob led source as per tender document as an attachment ( part c electrical lighting work ) , die cast aluminium c clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications. lock ms threaded galvanized lock key as per tender document as an attachment ( part c electrical lighting work ) , safety bond with lock clip 1.5 mtr long made with twisted pair of gi wire rope, 2mm or 3mm thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the inches cinches clamp is not locked properly. swl 150kgs.make: canara lighting as per tender document as an attachment ( part c electrical lighting work ) , 79mm round identification name plate duly epoxy polyester powder coated in matt texture finish. make : canara lighting, model: inp 79 as per tender document as an attachment ( part c electrical lighting work ) , fixed stage light bar, length 18 mtrs made using ms 40nb class b pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: dual barrel light bar equipped with 40x75x40 cable trenching arrangement with lid for better aesthetic look and cable safety. as per tender document as an attachment ( part c electrical lighting work ) , fixed front of house light bar, length 20 mtrs made using ms 40nb class b pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: dual barrel light bar equipped with 40x75x40 cable trenching arrangement with lid for better aesthetic look and cable safety.as per tender document as an attachment ( part c electrical lighting work ) , main curtain track system 23 mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish.as per tender document as an attachment ( part c electrical lighting work ) , main valance bar, length 23 mtrs made using 40nb, 48mm od construction arrangement 2mm thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. make : canara lighting, model : fvb 23m as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 4 way 10a, 250v a.c, iec, lighting junction box made up of 22swg crca for led lighting fixtures with pipe clamp arrangement for fixing on pipe grid or raul plug arrangement for wall / floor fixing, duly black epoxy polyester powder coated texture finish. make : canara lighting, model:jb 410iec as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 2 way 10a, 250v a.c, iec, junction box made up of 22swg crca with rocker switch to power up splitter and console with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, duly black epoxy polyester powder coated texture finish.make : canara lighting, model : psb 210iec as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 5 pin dmx signal in junction box fitted with 5 pin dmx male socket, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx ibm5 as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 5 pin dmx signal out junction box fitted with 5 pin dmx female socket, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx obf5 as per tender document as an attachment ( part c electrical lighting work ) , fabricated 5 pin dmx signal loop junction box fitted with 5 pin dmx male and female socket with 0.3 mtr dmx loop cable fitted with 5 pin dmx cable mount plug, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx wlb5 as per tender document as an attachment ( part c electrical lighting work ) , well designed 12 way direct lighting distribution board made up of crca sheet undergone through 7 tank process with variouschemical treatment to keep them rust free duly powder coated with matt texture finish consists of r, y, b indicator lamp, 25a tpn incomer, sp mcbs and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and hingable door with magnetic door lock complete make canara lighting, model dldb 12 as per tender document as an attachment ( part c electrical lighting work ) , auxiliary marshalling box for power and signal cable termination in grid level and in motorised light bar ce marked fc / pg cable entry gland required nos as per cable entry. ms channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. as per tender document as an attachment ( part c electrical lighting work ) , motor cable termination box for power cable termination at grid level. ce certified fc / pg 11 and 13.5 cable entry gland required nos as per cable entry. ms channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated combined 1 way motor control center panel cum remote control panel for curtain system made up of 14swg / 16swg / 18 swg crca sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with matt seamans grey texture finish with following specifications. 16a tp or tpn incomer. main contactor of 9a 240v 4 pole contactor with 04 as per tender document as an attachment ( part c electrical lighting work ) , rdm compatible dmx splitter unit with minimum following specifications.1 nos 5 pin dmx in socket and 8 nos 5 pin dmx out socket as per tender document as an attachment ( part c electrical lighting work ) , rdm compatible digital lighting console with minimum following specifications. 512 channel, 1 universe, 2 nos of dmx 5 pin output. as per tender document as an attachment ( part c electrical lighting work ) , 5 pin xlr male / female connectors of made up of extra high temperature resistant insulator material, larger solder contacts for easier termination. make : canara lighting, model : dmx5 cp as per tender document as an attachment ( part c electrical lighting work ) , 5 pin xlr termination plug made up of extra high temperature resistant insulator material, larger solder contacts for easier termination with 120 ohm resister with 0.25watt for signal termination.make : canara lighting, model: dmx5 tp as per tender document as an attachment ( part c electrical lighting work ) , main curtain fabric : fire retardant velvet fabric with lining 100percent ( 2 times of the finished dimension ) gathering as per the approved pattern and colour, not less than 300 gsm, duly stitched along with eyelets. size : 23 meter x 4meter make:nexgen / omphile as per tender document as an attachment ( part c electrical lighting work ) , main valance fabric: fire retardant velvet fabric 100 percent ( 2 times of the finished dimension ) gathering as per the approved pattern and colour, not less than 200 gsm, duly stitched along with eyelets. size : 23 meter x 1 meter make : nexgen as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 3cx1.5 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 7cx1.5 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 4cx 4 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , fr grade dmx signal 4 core plus ground shielding cable with ce mark for the signal network. make:deepcab as per tender document as an attachment ( part c electrical lighting work ) , ms perforated tray of size 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with matt black texture finish along with clamping arrangement. as per tender document as an attachment ( part c electrical lighting work ) , internal earthing copper bare conductor of size 14 swg for power network related to work coming under this scope. as per tender document as an attachment ( part c electrical lighting work ) , installation hardwares such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work. as per tender document as an attachment ( part c electrical lighting work ) , supply, installation, testing and commissioning of following nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc suitable for operating on eco friendly refrigerant 8.75tr scroll r407c 2f left and right auditorium as per tender document as an attachment ( part d air conditioning ) , air handling unit ( ahu ) : supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin, thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, as per tender document as an attachment ( part d air conditioning ) , expansion valve suitable for 8.75tr condensing unit as per tender document as an attachment ( part d air conditioning ) , catch all filter suitable for 11tr condensing unit as per tender document as an attachment ( part d air conditioning ) , shut off valves for suitable pipe sizes as per tender document as an attachment ( part d air conditioning ) , copper refrigerant piping supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 15.8mm dia ( 5 / 8inches ) as per tender document as an attachment ( part d air conditioning ) , copper refrigerant piping supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 28.5mm dia ( 1 1 / 8inches ) as per tender document as an attachment ( part d air conditioning ) , control cabling between idu to odu 2runs of 3c x 1.5 sqmm copper armoured as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 25mm as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 32mm as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 40mm as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc 22g as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc. 24g as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc. 26g as per tender document as an attachment ( part d air conditioning ) , supply installation testing and commissioning of acoustic insulation for supply air ducts with 10mm thick closed cell nitrile rubber as per tender document as an attachment ( part d air conditioning ) , providing of thermal insulation of the ducting using 13mm thick closed cell nitrile rubber make: armacell / k flex equivalent as per tender document as an attachment ( part d air conditioning ) , sitc of fire retardant canvas connection as per tender document as an attachment ( part d air conditioning ) , sitc of al powder coated jet diffusers 16inches dia as per tender document as an attachment ( part d air conditioning ) , sitc of gi butterfly dampers 16inches dia as per tender document as an attachment ( part d air conditioning ) , sitc of al powder coated 4 way diffusers 24inchesx24inches 12 nos as per tender document as an attachment ( part d air conditioning ) , sitc of gi collar dampers 18inchesx18inches 12 nos as per tender document as an attachment ( part d air conditioning ) , sitc of gi vcds as per tender document as an attachment ( part d air conditioning ) , sitc of odu and ahu base framing ms work as per tender document as an attachment ( part d air conditioning ) , sitc of main electrical panel consisting of main incomer mccb 100amps 1no, 63amps 4p mcbs 4 nos for 8.5 tr odus and 32amps 4pole mcb 1 nos for ahu and subzero with push button starter panel volts meter, amps meter and ryb indicators etc complete. as per tender document as an attachment ( part d air conditioning ) , sitc of electrical armoured power cable as per tender document as an attachment ( part d air conditioning ) 4 core x 10 sqmm cu arm as per tender document as an attachment ( part d air conditioning ) , supply of additional refrigerant r407c as per tender document as an attachment ( part d air conditioning ) , supply installation testing and commissioning of 16 passenger 1088 kg lift with the following specification product details as per tender document as an attachment ( part e sitc of lift ) ...

Due Date : October 05, 2023

Tender Value : ₹ Ref. Documents

View Tender
2
East Coast Railway - Andhra Pradesh

39655444 supply of gasket air duct to engine block emd pt. 40028613 dlw pt. no 16170441 [ warranty period: 30 months after the date of delivery ] ...

Due Date : October 05, 2023

Tender Value : ₹ Ref. Documents

View Tender
3
East Coast Railway - Andhra Pradesh

39650496 supply of gasket for air duct to turbo charger as per emd pt.no.40034637 alt nil or latest and dlw pt.no.16170477 [ warranty period: 30 months after the date of delivery ] ...

Due Date : October 05, 2023

Tender Value : ₹ Ref. Documents

View Tender
4
South Central Railway - Andhra Pradesh

39621311 auction sale of ms fabricating scrap : actual lot no. 03122309 1036. pl no. 98050047 (15) (hsn code 72044900 gst 18% on rcm basis) scrap of cond. & unserviceable ms fabricating scrap of location boxes, eolb hinges, molb boom pcs, tljbs, eolb pedestal stands, eolb meeting posts, ekts, stop boards, emergency lights, pulley for v belt grading machine, lube oil pump, turbo support, vibration damper, gear case top, gear case bottom, gear case top & bottom., traction motor ce end shield, traction alternator cover, ngef alternator cover, traction motor grease cap pe, traction motor end shield pe, traction motor fan chamber cover, traction motor air duct cover, traction alternator cover, traction alternator fan, traction alternator pulley, traction motor pe end shield, tamping unit, driver seats, lc gate pedestal, lc gate meeting posts, signal post ladders, shunt signal post, axle counter warning boards, sliding boom set, , eolb booms, 25kw static ovp, rotary switches 63a cap, power junction n boxes, rotary switches cap, iron stand, rods, steel racks, iron cart, revolving chair, operator seats, junction boxes, cls panel, ms clamps, s type chair, office s type chairs, revolving chairs, conference table, lecturer table, office table, duel desks, drawing index card cabinet, eolb pedestals, ms fencings, tool boxes, operator seats, panel boards, ms looping boxes, db/mdb boxes, dol starters, star & delta starters, main switches, fan blades, eolb gear boxes and other misc. items of wagon, s&t, loco, emu, ttm and electrical full or broken with or without attachments. (gas cutting should be minimum depends on material size and weight, maximum 6 cuts permitted only) location road no.4. (image attached). (note: 1. if any ss/ corten steel & non ferrous items found during cutting / loading / delivery shall be return to the railways by the purchaser 2. in case of clubbed lots, purchaser has to clear the lots in the sequence as mentioned in the lot description and no deviation is accepted. 3. no picking and choosing of material is permitted while taking delivery )....

Due Date : September 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
5
Tirumala Tirupati Devasthanams - Andhra Pradesh

39417556 providing wall paneling, false ceiling, furniture, electrification and air conditioning to the existing auditorium in 3rd floor of spmc ( w ) in the premises of svims tirupati , providing and supplying optra acoustical wall panelling with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for fire reaction class a as per astm e 84, fabric with an option of colors as per tender document as an attachment ( part a civil ) , providing and fixing of forbo flotex color / linear series flocked floor covering rolls having a density of 70 million fibres of nylon 6.6 per sqm, fire test en 13501, appearance retention hexapod iso 140 8, friction slip resistance test en 14041 class ds, sanitized anti microbial treatment with resilient waterproof backing as per tender document as an attachment ( part a civil ) , providing and fixing of mineral fibre acoustical suspended ceiling system with 19mm thick microlook 90 edge tiles with 15mm face exposed grid. as per tender document as an attachment ( part a civil ) , non combustible heradesign wood wool superfine a2 acoustic ceiling system 600 x 1200 x 25 mm as per tender document as an attachment ( part a civil ) , supply and fixing of seats with the following specifications ( godrej make ) 1 ) seat / back the seat sub assembly is made up of 1.2 plus or minus 0.1 cm. thk ply wood, upholstered with polyester fabric over moulded foam and covered with an injection moulded polypropylene outer cover. as per tender document as an attachment ( part a civil ) , front overhead speakers, brand: ev, model no: ekx 12 specifications: sitc 12inches1400 w ( peak ) , 131 db peak spl, 90degrees x 60degrees pattern for best coverage on mid size stages. 40degrees monitor angle frequency, range ( 10 db ) 55 hz 20 khz ( full space measurement ) as per tender document as an attachment ( part b pa system ) , subwoofer brand: ev model no: ekx 18s specifications: sitc 18inches 1600 w ( peak ) , 134 db peak spl, frequency range ( 10 db ) 35 hz 300khz ( half space frequency response ( 3 db ) 50 hz 100hz ( half space measurement ) speaker type subwoofer as per tender document as an attachment ( part b pa system ) , power amplifier brand: dynacord model no. l3600fd specifications:sitc live 2 x 1800 w with inbuilt dsp compete with fir filters, audio limiters, output delay per channel, 31 band geq per channel, peq per channel, load impedance and having pc remote control option as per tender document as an attachment ( part b pa system ) , powered stage monitors brand: ev model no. ekx 12p specifications: sitc 12inches powered loud speaker, smart dsp features best frequency response ( 3 db ) 60 hz 18 khz1 frequency range ( 10 db ) 50 hz 20 khz1 maximum spl 132 db2, coverage ( h x v ) 90inches x 60inches power rating 1500 w as per tender document as an attachment ( part b pa system ) , music source usb / sd / mp3 player with fm tuner brand: bosch model no. ple sdt specifications:mp3 playback from sd card and usb inputs plena easy line sd tuner bgm source as per tender document as an attachment ( part b pa system ) , corded vocal microphone brand:ev model no. pl24s specifications:sitc of corded vocal microphone with dynamic neodymium magnet microphone element, with frequency response 80hz 16khz, super cardioid polar pattern, sensitivity of 2.2mv / pa and output impedance 600 ohm. must have on / off switch. as per tender document as an attachment ( part b pa system ) , corded instrument microphone brand: ev model no. pl37 specifications:sitc of corded instrument microphone with self biased condenser microphone element, with frequency response of 55hz 16khz , cardioid polar pattern, sensitivity of 5.5mv / pa, rated impedance of 200 ohm, maximum spl :130db spl and dynamic range 107db as per tender document as an attachment ( part b pa system ) , wireless handheld microphone brand ev model no r300hd specifications designed for the entry level professional, the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , wireless lepel microphone brand: ev model no. r300 l specifications designed for the entrylevel professional, the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , wireless head worn microphone brand ev model no r300e specifications designed for the entry level professional the electro voice r300 makes the benefits of professional wireless microphone performance accessible to a new category of users as per tender document as an attachment ( part b pa system ) , gooseneck microphone brand: ev model no. re90p 18 specifications: sitc of freestanding gooseneck mic with base for podium having back electret condenser microphone element, hyper cardioid polar pattern, led status display as per tender document as an attachment ( part b pa system ) , speaker mountings suitable to the speakers specifications: sitc of fabricated speaker mounts as per tender document as an attachment ( part b pa system ) , mike table stand specifications: sitc mike table stand as per tender document as an attachment ( part b pa system ) , microphone desk stands specifications: sitc microphone desk stands as per tender document as an attachment ( part b pa system ) , microphone floor stands brand: ev specifications: microphone floor stands as per tender document as an attachment ( part b pa system ) , mixer brand: sound craft model no. signature 16 specifications: sitc 16 channel mixing console as per tender document as an attachment ( part b pa system ) , microphone cable brand: belden specifications: sitc of 2 core shielded microphone cable. as per tender document as an attachment ( part b pa system ) , speaker cable brand: finolex specifications: sitc of 2 core 2.5 sqm speaker cable as per tender document as an attachment ( part b pa system ) , equipment rack brand: d link / netrack / netfox model no. 24u specifications: sitc of 24 u equipment rack as per tender document as an attachment ( part b pa system ) , audio recorder brand: sony specifications: audio recorder as per tender document as an attachment ( part b pa system ) , connectors brand: neutrik specifications: sitc of xlr / phono socket / rca / p38 / ep connectors as per tender document as an attachment ( part b pa system ) , premium quality led parcan light with latest rdm technology for user friendly operation with below specifications: light source : single cob led source as per tender document as an attachment ( part c electrical lighting work ) , premium quality led blinder effect light with latest rdm technology for user friendly operation with below specifications: light source : quad led cob source as per tender document as an attachment ( part c electrical lighting work ) , premium quality led par light with latest rdm technology for user friendly operation with below specifications: base color rgbw color mixing, led configuration: multiple nos individual rgbw led configuration, power cable: 3 core 1 sq.mm. copper pvc insulated as per tender document as an attachment ( part c electrical lighting work ) , premium quality led profile spot light with latest rdm technology for user friendly operation with below specifications: light source : single led cob source as per tender document as an attachment ( part c electrical lighting work ) , 150w led beam, spot, wash moving light with rdm protocol and hi grade plastic body black color with following specifications led : 150w as per tender document as an attachment ( part c electrical lighting work ) , ce certified 300w led follow spot light 3200k with rdm / dmx protocol and die cast body duly epoxy polyester powder coated in black matt texture finish with following specifications led : 300w cob led source as per tender document as an attachment ( part c electrical lighting work ) , die cast aluminium c clamp with safety chain duly epoxy polyester powder coated in black matt texture finish and safe working load of 100kg with below specifications. lock ms threaded galvanized lock key as per tender document as an attachment ( part c electrical lighting work ) , safety bond with lock clip 1.5 mtr long made with twisted pair of gi wire rope, 2mm or 3mm thickness with sleeve to be fixed around the grid to avoid fall of the material in case if the inches cinches clamp is not locked properly. swl 150kgs.make: canara lighting as per tender document as an attachment ( part c electrical lighting work ) , 79mm round identification name plate duly epoxy polyester powder coated in matt texture finish. make : canara lighting, model: inp 79 as per tender document as an attachment ( part c electrical lighting work ) , fixed stage light bar, length 18 mtrs made using ms 40nb class b pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: dual barrel light bar equipped with 40x75x40 cable trenching arrangement with lid for better aesthetic look and cable safety. as per tender document as an attachment ( part c electrical lighting work ) , fixed front of house light bar, length 20 mtrs made using ms 40nb class b pipe dual barrel construction arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: dual barrel light bar equipped with 40x75x40 cable trenching arrangement with lid for better aesthetic look and cable safety.as per tender document as an attachment ( part c electrical lighting work ) , main curtain track system 23 mtrs long, center parting with overlap of 0.9mtr arrangement undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with below specifications: heavy duty curtain track duly epoxy polyester powder coated in black matt texture finish.as per tender document as an attachment ( part c electrical lighting work ) , main valance bar, length 23 mtrs made using 40nb, 48mm od construction arrangement 2mm thickness undergone through various chemical treatment to keep them rust free and duly epoxy polyester powder coated in black matt texture finish with suitable suspenders. make : canara lighting, model : fvb 23m as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 4 way 10a, 250v a.c, iec, lighting junction box made up of 22swg crca for led lighting fixtures with pipe clamp arrangement for fixing on pipe grid or raul plug arrangement for wall / floor fixing, duly black epoxy polyester powder coated texture finish. make : canara lighting, model:jb 410iec as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 2 way 10a, 250v a.c, iec, junction box made up of 22swg crca with rocker switch to power up splitter and console with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, duly black epoxy polyester powder coated texture finish.make : canara lighting, model : psb 210iec as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 5 pin dmx signal in junction box fitted with 5 pin dmx male socket, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx ibm5 as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated 5 pin dmx signal out junction box fitted with 5 pin dmx female socket, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx obf5 as per tender document as an attachment ( part c electrical lighting work ) , fabricated 5 pin dmx signal loop junction box fitted with 5 pin dmx male and female socket with 0.3 mtr dmx loop cable fitted with 5 pin dmx cable mount plug, junction box made up of 22swg crca, with pipe clamp on pipe grid arrangement for fixing or raul plug arrangement for wall / floor fixing, black epoxy polyester powder coated, duly black epoxy polyester powder coated texture finish. make : canara lighting, model : dmx wlb5 as per tender document as an attachment ( part c electrical lighting work ) , well designed 12 way direct lighting distribution board made up of crca sheet undergone through 7 tank process with variouschemical treatment to keep them rust free duly powder coated with matt texture finish consists of r, y, b indicator lamp, 25a tpn incomer, sp mcbs and for the junction boxes fixed on the top of the light bar including wiring and busbar connection with proper earthing and hingable door with magnetic door lock complete make canara lighting, model dldb 12 as per tender document as an attachment ( part c electrical lighting work ) , auxiliary marshalling box for power and signal cable termination in grid level and in motorised light bar ce marked fc / pg cable entry gland required nos as per cable entry. ms channel arranging to fix terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. as per tender document as an attachment ( part c electrical lighting work ) , motor cable termination box for power cable termination at grid level. ce certified fc / pg 11 and 13.5 cable entry gland required nos as per cable entry. ms channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap as per tender document as an attachment ( part c electrical lighting work ) , ms fabricated combined 1 way motor control center panel cum remote control panel for curtain system made up of 14swg / 16swg / 18 swg crca sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with matt seamans grey texture finish with following specifications. 16a tp or tpn incomer. main contactor of 9a 240v 4 pole contactor with 04 as per tender document as an attachment ( part c electrical lighting work ) , rdm compatible dmx splitter unit with minimum following specifications.1 nos 5 pin dmx in socket and 8 nos 5 pin dmx out socket as per tender document as an attachment ( part c electrical lighting work ) , rdm compatible digital lighting console with minimum following specifications. 512 channel, 1 universe, 2 nos of dmx 5 pin output. as per tender document as an attachment ( part c electrical lighting work ) , 5 pin xlr male / female connectors of made up of extra high temperature resistant insulator material, larger solder contacts for easier termination. make : canara lighting, model : dmx5 cp as per tender document as an attachment ( part c electrical lighting work ) , 5 pin xlr termination plug made up of extra high temperature resistant insulator material, larger solder contacts for easier termination with 120 ohm resister with 0.25watt for signal termination.make : canara lighting, model: dmx5 tp as per tender document as an attachment ( part c electrical lighting work ) , main curtain fabric : fire retardant velvet fabric with lining 100percent ( 2 times of the finished dimension ) gathering as per the approved pattern and colour, not less than 300 gsm, duly stitched along with eyelets. size : 23 meter x 4meter make:nexgen / omphile as per tender document as an attachment ( part c electrical lighting work ) , main valance fabric: fire retardant velvet fabric 100 percent ( 2 times of the finished dimension ) gathering as per the approved pattern and colour, not less than 200 gsm, duly stitched along with eyelets. size : 23 meter x 1 meter make : nexgen as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 3cx1.5 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 7cx1.5 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , pvc copper unarmoured flexible frls insulated multicore cable 1100v grade confirming to is694 size 4cx 4 sq mm.make: ttd approved brands as per tender document as an attachment ( part c electrical lighting work ) , fr grade dmx signal 4 core plus ground shielding cable with ce mark for the signal network. make:deepcab as per tender document as an attachment ( part c electrical lighting work ) , ms perforated tray of size 40 x 75 x 40mm and 1.6 mm thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with matt black texture finish along with clamping arrangement. as per tender document as an attachment ( part c electrical lighting work ) , internal earthing copper bare conductor of size 14 swg for power network related to work coming under this scope. as per tender document as an attachment ( part c electrical lighting work ) , installation hardwares such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work. as per tender document as an attachment ( part c electrical lighting work ) , supply, installation, testing and commissioning of following nominal capacity air cooled condensing unit consisting of scroll compressor, copper condenser coil of copper tubes and blue hydrophilic coated aluminium fins, condenser fans, etc suitable for operating on eco friendly refrigerant 8.75tr scroll r407c 2f left and right auditorium as per tender document as an attachment ( part d air conditioning ) , air handling unit ( ahu ) : supply, installation, testing and commissioning of new air handling unit ( horizontal floor mounted ) in double skin construction with 0.8 mm plain g.i. inner skin and 0.8 mm pre coated gi outer skin, thermal break aluminium profile with thermal barrier, 43mm thick puf panels. the air handling unit shall consist of face mounted 50mm thick 20 micron filters, as per tender document as an attachment ( part d air conditioning ) , expansion valve suitable for 8.75tr condensing unit as per tender document as an attachment ( part d air conditioning ) , catch all filter suitable for 11tr condensing unit as per tender document as an attachment ( part d air conditioning ) , shut off valves for suitable pipe sizes as per tender document as an attachment ( part d air conditioning ) , copper refrigerant piping supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 15.8mm dia ( 5 / 8inches ) as per tender document as an attachment ( part d air conditioning ) , copper refrigerant piping supply, installation and testing of 19 g hard copper piping of following sizes ( the suction line to be insulated with 19 mm thick class o armaflex with gc closed cell nitrile rubber precovered tubes with factory laminated glass cloth ) including supporting fixtures and accessories etc. complete. 28.5mm dia ( 1 1 / 8inches ) as per tender document as an attachment ( part d air conditioning ) , control cabling between idu to odu 2runs of 3c x 1.5 sqmm copper armoured as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 25mm as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 32mm as per tender document as an attachment ( part d air conditioning ) , supply and fixing of hard pvc drain piping with suitable supports as required and insulated with 6mm thick nitrile rubber insulation 40mm as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc 22g as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc. 24g as per tender document as an attachment ( part d air conditioning ) , sitc of rectangular gss ducting site fabricated ducting out of gi sheet including vane dampers if required etc. 26g as per tender document as an attachment ( part d air conditioning ) , supply installation testing and commissioning of acoustic insulation for supply air ducts with 10mm thick closed cell nitrile rubber as per tender document as an attachment ( part d air conditioning ) , providing of thermal insulation of the ducting using 13mm thick closed cell nitrile rubber make: armacell / k flex equivalent as per tender document as an attachment ( part d air conditioning ) , sitc of fire retardant canvas connection as per tender document as an attachment ( part d air conditioning ) , sitc of al powder coated jet diffusers 16inches dia as per tender document as an attachment ( part d air conditioning ) , sitc of gi butterfly dampers 16inches dia as per tender document as an attachment ( part d air conditioning ) , sitc of al powder coated 4 way diffusers 24inchesx24inches 12 nos as per tender document as an attachment ( part d air conditioning ) , sitc of gi collar dampers 18inchesx18inches 12 nos as per tender document as an attachment ( part d air conditioning ) , sitc of gi vcds as per tender document as an attachment ( part d air conditioning ) , sitc of odu and ahu base framing ms work as per tender document as an attachment ( part d air conditioning ) , sitc of main electrical panel consisting of main incomer mccb 100amps 1no, 63amps 4p mcbs 4 nos for 8.5 tr odus and 32amps 4pole mcb 1 nos for ahu and subzero with push button starter panel volts meter, amps meter and ryb indicators etc complete. as per tender document as an attachment ( part d air conditioning ) , sitc of electrical armoured power cable as per tender document as an attachment ( part d air conditioning ) 4 core x 10 sqmm cu arm as per tender document as an attachment ( part d air conditioning ) , supply of additional refrigerant r407c as per tender document as an attachment ( part d air conditioning ) , supply installation testing and commissioning of 16 passenger 1088 kg lift with the following specification product details as per tender document as an attachment ( part e sitc of lift ) ...

Due Date : September 15, 2023

Tender Value : ₹ Ref. Documents

View Tender
6
Andhra Pradesh Power Generation Corporation Limited - Andhra Pradesh

39182144 round corner expansion joints , expansion joint, size 3362 x 4250mm, type style 2, thickness 2.5mm full size, part no.113, for hot secondary air duct assembly, round corner metallic expansio joint for air preheater outlet, hot primary duct, size 2810 x 3450mm, type style 2, full size, thichness 2.5mm 1 ) convolution of bellows as per astm 240 gr 304 and as per is 6911 / 1922 standards 2 ) flanges / tie rods / hinges carbon steel, round corner metallic expansion joint for flue gas duct near chimney, size 3712 x 7418mm, type style 2, full size, thichness 2.5mm 1 ) convolution of bellows as per astm 240 gr 304 and as per is 6911 / 1922 standards 2 ) flanges / tie rods / hinges carbon steel...

Due Date : September 30, 2023

Tender Value : ₹ Ref. Documents

View Tender
7
South Central Railway - Andhra Pradesh

39180538 supply of 1.set consisting of 02 items. ( gaskets ) . 2. gasket drawing dlw drg. no. 40034634., gasket drawing dlw drg. no. 40034634 , alt. aa , dlw pt. no. 16170600 specification misc 375, rev. r1 [ warranty period: 30 months after the date of delivery ] , set consisting of 02 items. 1 ) gasket as per drg.no. 40034630 alt ab specn: purchase specification no.misc. 375 rev. r1. = 170 nos. 2 ) gasket air duct to engine block to emd part no. 40028613 and blw part no. 16170441 = 40 nos. [ warranty period: 30 months after the date of delivery ] ...

Due Date : September 06, 2023

Tender Value : ₹ Ref. Documents

View Tender
10
South Central Railway - Andhra Pradesh

38445434 supply of 1.set consisting of 02 items. ( gaskets ) . 2. gasket drawing dlw drg. no. 40034634., gasket drawing dlw drg. no. 40034634 , alt. aa , dlw pt. no. 16170600 specification misc 375, rev. r1 [ warranty period: 30 months after the date of delivery ] , set consisting of 02 items. 1 ) gasket as per drg.no. 40034630 alt ab specn: purchase specification no.misc. 375 rev. r1. = 170 nos. 2 ) gasket air duct to engine block to emd part no. 40028613 and blw part no. 16170441 = 40 nos. [ warranty period: 30 months after the date of delivery ] ...

Due Date : July 24, 2023

Tender Value : ₹ Ref. Documents

View Tender
14
Department Of Heavy Industry - Andhra Pradesh

38262399 bids are invited for light machining items clamp support for lld tg9711143046 , exciter hot air duct tg9711952009 , oil flushing fixture tg9712272028 , jacking fixture tg9712273008 , support plate tg9715674135 , adapter pipe tg9715624065 , flange tg9712294048 , skid plate tg9715673392 total quantity : 36...

Due Date : July 08, 2023

Tender Value : ₹ Ref. Documents

View Tender
15
Ministry Of Petroleum And Natural Gas - Andhra Pradesh

38218162 bids are invited for full assembly in a single piece ( including duct connecting flanges ) along with duct connecting flanges. insulation bolster ss wire mesh + glass fibre + glass felt+ fasteners / washers etc., along with insulation bolster ss wire mesh + glass fibre + glass felt+ fasteners / washers etc. , non metallic type expansion joint made up of multiply and multilayer insulating fabric alongwith insulation bolster i.e., ceramic wool in wire mesh of inconel or silica fabric encasing, plus dust barrier with super seal gasket, fasteners / washers etc. , non metallic type expansion joint made up of multilayered fabric construction capable to operate at following operating conditions., non metallic type expansion joint made up of multilayered fabric construction capable to operate at following operating conditions. nmej for air duct inlet auxiliary burners, non metallic type expansion joint made up of multiply and multilayer insulating fabric alongwith insulation bolster i.e., inconel wiremesh + hs600 + superwool, with dust barrier , super seal gasket, fasteners / washers etc. , non metallic type expansion joint made up of multiply and multilayer insulating fabric alongwith insulation bolster i.e., inconel wiremesh + hs600 + superwool, with dust barrier , super seal gasket, fasteners / washers etc....

Due Date : June 30, 2023

Tender Value : ₹ Ref. Documents

View Tender
16
East Coast Railway - Andhra Pradesh

38177586 supply of gasket air duct to after cooler as per dlw pt.no.16170416 and emd pt.no.40040012 alt nil or latest. date of manufacturing should not be more than three months from the date of supply. [ warranty period: 30 months after the date of delivery ] ...

Due Date : July 05, 2023

Tender Value : ₹ Ref. Documents

View Tender
17
Department Of Heavy Industry - Andhra Pradesh

37483166 bids are invited for supply of non metallic expansion joints for gail usar project 1 exp jt cfg 3 b from id fan to stackcfg 3 b duct from id fan to stack size 1262x1262 2 exp jt hfg 1 a duct to caphhfg 1 a to caph size 1862x1862 3 exp jt hot air duct size 1612x1612 4 exp jt ha 4 a duct size 1612x1612 5 exp jt bp 2 caph bypass duct 1112x1112 6 burner finger duct ( side ) ha 4 b 420x420 7 burner finger duct ( cen ) ha 4 c 510x510 8 burner duct ha 5 1622x852 9 burner duct ha 6 a 1656x852 10 burner duct ha 6 b 1294x852 total quantity : 30...

Due Date : May 20, 2023

Tender Value : ₹ Ref. Documents

View Tender
18
Ministry Of Power - Andhra Pradesh

37317972 bids are invited for custom bid for services biennial service contract for robotic air duct cleaning including connected ahus grills diffusers of hvac system in ntpcsimhadri...

Due Date : May 13, 2023

Tender Value : ₹ Ref. Documents

View Tender
19
East Coast Railway - Andhra Pradesh

37316869 supply of gasket air duct to after cooler as per emd pt.no.40040012 and dlw pt.no.16170416 [ warranty period: 30 months after the date of delivery ] , gasket thermostatic valve edge molded as per emd pt.no.40034621 alt nil or latest and dlw.pt.no.16171172 [ warranty period: 30 months after the date of delivery ] ...

Due Date : May 10, 2023

Tender Value : ₹ Ref. Documents

View Tender
20
South Central Railway - Andhra Pradesh

37249939 supply of gasket air duct to turbocharger to emd part no.40034637 and to blw part no.16170477. [ warranty period: 30 months after the date of delivery ] ...

Due Date : May 02, 2023

Tender Value : ₹ Ref. Documents

View Tender
23
East Coast Railway - Andhra Pradesh

37002422 supply of gasket for air duct to turbo charger as per emd pt.no.40034637 alt nil or latest and dlw pt.no.16170477. emd part number, firm name and date of mfg to be printed on the gasket. date of manufacturing should not be more than three months from the date of supply. [ warranty period: 30 months after the date of delivery ] ...

Due Date : April 17, 2023

Tender Value : ₹ Ref. Documents

View Tender
25
East Coast Railway - Andhra Pradesh

36796013 supply of gasket water inlet tube to water manifold as per emd pt.no.40040025 and dlw pt.no.16170660 emd part number, firm name and date of mfg to be printed on the gasket. date of manufacturing should not be more than three months from the date of supply. [ warranty period: 30 months after the date of delivery ] , gasket air duct to engine block as per emd pt.no.40028613 and dlw pt.no.16170441 emd part number, firm name and date of mfg to be printed on the gasket. date of manufacturing should not be more than three months from the date of supply. [ warranty period: 30 months after the date of delivery ] , gasket air duct to after cooler as per emd pt.no.40040012 and dlw pt.no.16170416 emd part number, firm name and date of mfg to be printed on the gasket. date of manufacturing should not be more than three months from the date of supply. [ warranty period: 30 months after the date of delivery ] , gasket top header to tank as per dlw pt no.17270935 and emd pt no.9523130 alt nil or latest, emd part number, firm name and date of mfg to be printed on the gasket. date of manufacturing should not be more than three months from the date of supply. [ warranty period: 30 months after the date of delivery ] page 1 of 3 run date / time: 15 / 03 / 2023 12:37:44dls / vskp / ecor tender document , seal o ring stud shaft as per dlw pt no.16170544 and emd pt no. 8294874 alt nil or latest emd part number, firm name and date of mfg to be printed on the gasket. date of manufacturing should not be more than three months from the date of supply. [ warranty period: 30 months after the date of delivery ] , gasket thermostatic valve edge molded as per emd pt.no.40034621 alt nil or latest and dlw.pt.no.16171172 emd part number, firm name and date of mfg to be printed on the gasket. date of manufacturing should not be more than three months from the date of supply. [ warranty period: 30 months after the date of delivery ] ...

Due Date : April 04, 2023

Tender Value : ₹ Ref. Documents

View Tender
27
Uranium Corporation Of India Limited - Andhra Pradesh

34955480 rate contract for h.b.f spares , spares of 110 m2 horizontal vaccum belt filter ( model:42b / 09 30vfilter ) , wear belt ( 56850 x 50 x 6mm thk ) ( moc:pp / pl ) , scrapper blades 4.2mtrs hbf, ( moc: uhmwpe ) , curb of 125mm height ( each meter ) , ( moc:nr ) , 4 numbers of end slides, ( moc:uhmwpe ) , buta seal ( 1mm thk x 29000mm ) , teflon strips ( 4200mm lg ) ( uhmwpe ) , ( moc:uhmwpe ) , spray nozzles ( each ) , ( moc:ss304 ) , belt guide rollers, ( moc:uhmwpe ) , cloth trackig air bellows ( 1 set consists of2 numbers ) , ( moc: nr ) , plummer blocks suitable for 1210ek with out bearing, ( moc:uhmwpe ) , plummer blocks suitable for 1209ek with out bearing, ( moc:uhmwpe ) , 4 numbers ss304 clamps , 4 numbers ss304 clamps , air duct sleeve , ( moc: nr ) , 400 nb belt return rollers , ( moc:msrl ) , feed dam roller, ( moc:msrl ) , 100 nb cloth return rollers, ( moc: ss 304 ) , 150 nb cloth return rollers, ( moc: ss 304 ) , cloth tension assembly , pneumatic panel , filtration hose along with ø100mm x 2900mm length with 4 numbersclamps ( moc: ss304 ) , filtration hose along with ø100mm x 3000mm length with 4numbersclamps ( moc: ss304 ) , one set of seal strips ( one set consists of 18 pieces for thevaccum box, 1 piece at head end, 1 piece tail end, 4 pieces half moon at ends ) , ( moc:uhmwpe ) , slurry feeder hose for nuetral hbf flexible hose 274m id x 1850mm long with hose clamps to suite 250b pipe. , ( moc: natural rubber ) , slurry feeder hose for nuetral hbf flexible hose 169m id x 1800mm long with hose clamps to suite 150b pipe, ( moc: natural rubber ) , bowed roller for horizontal belt filter of diameter 150mm ( moc of shaft : ss316 ) , axle diameter : 75mm. roller face : 4450mm, height of bow : 74mm , spares of 5 m2 horizontal vaccum belt filter ( model:12b / 02 30v product filter ) , cloth tensioner assembly ( moc: ss304 ) , belt return rollers 250 nb ( moc: ss304 ) , feed dam rollers 285 nb ( moc: ss304 ) , cloth roller 75 dia ( moc: ss304 ) , cloth tension roller 75 dia ( moc: ss304 ) , cloth tracking roller 75 dia ( moc: ss304 ) , belt guide roller m.k a ss304 / hdpe ( moc: ss304 ) , belt guide roller m.k b ss304 / hdpe ( moc: ss304 ) , belt guide roller m.k c ss304 / hdpe ( moc: ss304 ) , seal water assy ss304 ( moc: ss304 ) , spray pipe assembly ( moc: ss304 ) , spray sheet pvc ( moc: pvc ) , cloth tracking unit ss304 / nr bellows ( moc: ss304 / nr ) , pneumatic pannel / cloth sensor assy ( moc: frl ) , spray pipe manifold ( moc: ss304 ) , slurry feeder assy ( moc: ss304 ) , curb 75mtrs ht ( each meter ) ( moc: nr ) , wear belts endless ( 6thk x 35 width, 12875 length ) ( moc: pp / pl ) , plummer blocks suitable for 1207ek with out bearing ( moc:uhmwpe ) , cloth scrapper ( moc:uhmwpe ) , plummer blocks 30 dia for scrapper with out bearing ( moc:uhmwpe ) , feed dam roller bearing blocks with out bearing ( moc:uhmwpe ) , filtrate hoses along with hose id 75 x 1750mm long with 4 numbers of ss316 clamps ( moc:sbr ) , seal strip sets consistes of 4 numbers of seal strip, 1 no. head end pad, 1 no. tail end pad, and 4 numbers of end slides ( moc:uhmwpe ) ...

Due Date : December 16, 2022

Tender Value : ₹ Ref. Documents

View Tender
29
South Central Railway - Andhra Pradesh

34418559 supply of sub assembly of traction motor air duct to dlw part no.17272336 ( rubber shim ) . note: work test certificate must be submitted by firm along with supply....

Due Date : October 28, 2022

Tender Value : ₹ Ref. Documents

View Tender
30
East Coast Railway - Andhra Pradesh

34359157 supply of gasketgasket, gasket ( lube oil line ) as per emd drg no.8029167 alt db or latest and blw pt.no.16170076. , gasket water inlet tube to water manifold as per emd pt.no.40040025 and dlw pt.no.16170660. , gasket turbo charger mounting to emd part no.40040027, dlw part no.16170453. , gasket air duct to after cooler as per emd pt.no.40040012 and dlw pt.no.16170416. , gasket, airduct to engine block to emd pt no: 40028613 and dlw pt no: 16170441....

Due Date : October 27, 2022

Tender Value : ₹ Ref. Documents

View Tender
31
East Coast Railway - Andhra Pradesh

34357961 supply of lifting divice turbo air duct asslylifting divice turbo air duct assly, lifting divice turbo air duct assly for hhp locomotives as per dlw pt.no.15610251 and drg.no.mt01gm0046 alt c....

Due Date : October 25, 2022

Tender Value : ₹ Ref. Documents

View Tender
32
South Central Railway - Andhra Pradesh

33910454 supply of traction motor air duct boot ( leather ) as per rdso specn.no.mp 0.2400.25 ( rev 00 ) of july 2003 ) to drg.no.rdso / sk.dp 3503 alt.1.traction motor air duct boot ( leather ) as per rdso specn.no.mp 0.2400.25 ( rev 00 ) of july 2003 ) to drg.no.rdso / sk.dp 3503 alt.1., traction motor air duct boot ( leather ) as per rdso specn.no.mp 0.2400.25 ( rev 00 ) of july 2003 ) to drg.no.rdso / sk.dp 3503 alt.1....

Due Date : September 28, 2022

Tender Value : ₹ Ref. Documents

View Tender
33
South Central Railway - Andhra Pradesh

33843747 auction sale of rubber items 3.5 mt delivery on actual weighment basis. lot no 5364220571gtlgyruaps [ andhra pradesh ] available with sse dsl gy. scrap cond. & u / s released rubber items consisting of 05 items 1 ) rubber bellows. 2 ) leather bellows. 3 ) hose pipes. 4 ) air ducts. 5 ) platform and luggage trolley wheels and miscellaneous rubber pipes with or without ferrous reinforcement attachments. total quantity: 3.5 mt approx. available in new scrap yard of gooty diesel loco shed bin no. 8 and 9. ds8 no 536480003 dated 04.05.2022. hsn code: 720429 / 18%. note: 1 ) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2 ) post auction no representation shall be entertained.3 ) for photos of this lot, kindly click on view lot image on bottom left side.4 ) gas / chisel cutting is permitted , if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc.5 ) in case purchasers require usage of any railway assets / materials such as electricity / forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6 ) it is the responsibility of the purchaser / bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian.7 ) clubbing of the lots, what so ever, is not permitted for loading. 8 a ) in case the proprietor / owner of the firm, wishes to effect the delivery of the lot personally, he / she should collect the original do copy and delivery point letter, duly appending his / her specimen signature in this office, by submitting either aadhaar ( or ) pan card , so as to have genuineness in all aspects , from both ends.b ) in case the proprietor / owner of the firm, wishes to nominate a representative on his / her behalf , to effect the delivery of the lot, the representative should collect the original do copy and delivery point letter, duly appending his / her specimen signature in this office, by submitting original power of attorney filled in all aspects , along with either aadhaar ( or ) pan card of the representative , so as to have genuineness in all aspects , from both ends....

Due Date : September 15, 2022

Tender Value : ₹ Ref. Documents

View Tender
35
South Central Railway - Andhra Pradesh

33541845 auction sale of rubber items 3.5 mt delivery on actual weighment basis. lot no 5364220571gtlgyruaps [ andhra pradesh ] available with sse dsl gy. scrap cond. & u / s released rubber items consisting of 05 items 1 ) rubber bellows. 2 ) leather bellows. 3 ) hose pipes. 4 ) air ducts. 5 ) platform and luggage trolley wheels and miscellaneous rubber pipes with or without ferrous reinforcement attachments. total quantity: 3.5 mt approx. available in new scrap yard of gooty diesel loco shed bin no. 8 and 9. ds8 no 536480003 dated 04.05.2022. hsn code: 720429 / 18%. note to the bidders 1 ) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2 ) post auction no representation shall be entertained.3 ) for photos of this lot, kindly click on view lot image on bottom left side.4 ) gas / chisel cutting is permitted , if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc.5 ) in case purchasers require usage of any railway assets / materials such as electricity / forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6 ) it is the responsibility of the purchaser / bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian. 7 ) clubbing of the lots, what so ever, is not permitted for loading....

Due Date : August 24, 2022

Tender Value : ₹ Ref. Documents

View Tender
36
Ministry Of Defence - Andhra Pradesh

33431840 bids are invited for 300mm pvc duct blower hose , 6 inch pvc duct blower hoseprocurement of flexible air duct hoses for cool total quantity : 100...

Due Date : August 16, 2022

Tender Value : ₹ Ref. Documents

View Tender
41
East Coast Railway - Andhra Pradesh

32478258 supply of felt packing for tm tao 659 air ductfelt packing for tm tao 659 air duct,felt packing for tm tao 659 air duct to clws drg.no. 05.4.54.59 alt.2(material shall be made as per latest specn .no.is:1719/2000)...

Due Date : June 08, 2022

Tender Value : ₹ Ref. Documents

View Tender
42
Ministry Of Defence - Andhra Pradesh

32462446 bids are invited for 300mm dia pvc duct blower hose , 6 inch air duct hose procurement of flexible air duct hoses for cool total quantity : 100...

Due Date : June 21, 2022

Tender Value : ₹ Ref. Documents

View Tender
44
South Central Railway - Andhra Pradesh

32299606 auction sale of rubber items 3.5 mt delivery on actual weighment basis. lot no 5364220571gtlgyruap [ andhra pradesh ] available with sse dsl gy. scrap cond. & u / s released rubber items consisting of 05 items 1 ) rubber bellows. 2 ) leather bellows. 3 ) hose pipes. 4 ) air ducts. 5 ) platform and luggage trolley wheels and miscellaneous rubber pipes with or without ferrous reinforcement attachments. total quantity: 3.5 mt approx. available in new scrap yard of gooty diesel loco shed bin no. 8 and 9. ds8 no 536480003 dated 04.05.2022. hsn code: 720429 / 18%. note to the bidders 1 ) bidders may visit the site of the material for physical inspection of the material and loading spot also, in all aspects before bidding in e auction.2 ) post auction no representation shall be entertained.3 ) for photos of this lot, kindly click on view lot image on bottom left side.4 ) gas / chisel cutting is permitted , if required, for easy loading and transportation purpose, only after ensuring sufficient safety measures against fire hazards etc to avoid any mishap to any person, railway material etc.5 ) in case purchasers require usage of any railway assets / materials such as electricity / forklift truck etc. during the process of delivery, they are required to pay, the prescribed amount to railways, as directed by the respective custodian of the lot. 6 ) it is the responsibility of the purchaser / bidder to return excess material, if found during gross weighment, to the nominated premises of the custodian....

Due Date : May 26, 2022

Tender Value : ₹ Ref. Documents

View Tender