Ministry Of Defence - Andhra Pradesh

34230042 bids are invited for flag ss poles 800x225m , acrylic sheets for lighting , tri color rope light , wall reflectors light total quantity : 720...

Tirumala Tirupati Devasthanams - Andhra Pradesh

33963610 supply and fixing of 3d letters signage board in english odisha languages to ttd kalyanamandapam at bhubaneswar, odisha state , supplying and fixing of 3d letters assembled in a frame in english and odiya languages. the base of the individual letter will be aluminium composite panel. the face of the letter will be covered with 3mm thick 0 40 imported acrylic sheet, raising of each letter with 75 mm acrylic imported sheet as per given colour pattern. leds inside the letters should be powered by samsung leds or equivalent 12 v waterproof 1.5w / module, eu rohs compliant, lens shape, type circular, luminex flux 137im. 20 module pack. power supply of the leds are rain proof ip43, low carbon, rohs 12v 700 amp. using ms iron rectangular tube 50 x 25 mm for back frame for the letters and ms angle 50x50 x5 mm vertical post for the frame, using 40 x 40 x 5 mm ms angle for incline membrane back support to frame. height of the ms post on english language board will be 8 ft, odiya language board ms post height will be 5 ft. one year onsite warranty of the product. all provisions for setting and servicing arrangement with material shifted with supplying and fixing and transportation charges as per the direction of instructor. a ) english language : t.t.d kalyana mandapam, bhubaneswar ( 24 inches height of letter ) , supplying and fixing of 3d letters assembled in a frame in english and odiya languages. the base of the individual letter will be aluminium composite panel. the face of the letter will be covered with 3mm thick 0 40 imported acrylic sheet, raising of each letter with 75 mm acrylic imported sheet as per given colour pattern. leds inside the letters should be powered by samsung leds or equivalent 12 v waterproof 1.5w / module, eu rohs compliant, lens shape, type circular, luminex flux 137im. 20 module pack. power supply of the leds are rain proof ip43, low carbon, rohs 12v 700 amp. using ms iron rectangular tube 50 x 25 mm for back frame for the letters and ms angle 50x50 x5 mm vertical post for the frame, using 40 x 40 x 5 mm ms angle for incline membrane back support to frame. height of the ms post on english language board will be 8 ft, odiya language board ms post height will be 5 ft. one year onsite warranty of the product. all provisions for setting and servicing arrangement with material shifted with supplying and fixing and transportation charges as per the direction of instructor. b ) 48 feet x 2 feet ms fabrication work with concrete foundations, supplying and fixing of 3d letters assembled in a frame in english and odiya languages. the base of the individual letter will be aluminium composite panel. the face of the letter will be covered with 3mm thick 0 40 imported acrylic sheet, raising of each letter with 75 mm acrylic imported sheet as per given colour pattern. leds inside the letters should be powered by samsung leds or equivalent 12 v waterproof 1.5w / module, eu rohs compliant, lens shape, type circular, luminex flux 137im. 20 module pack. power supply of the leds are rain proof ip43, low carbon, rohs 12v 700 amp. using ms iron rectangular tube 50 x 25 mm for back frame for the letters and ms angle 50x50 x5 mm vertical post for the frame, using 40 x 40 x 5 mm ms angle for incline membrane back support to frame. height of the ms post on english language board will be 8 ft, odiya language board ms post height will be 5 ft. one year onsite warranty of the product. all provisions for setting and servicing arrangement with material shifted with supplying and fixing and transportation charges as per the direction of instructor .c ) odisha language : t.t.d kalyana mandapam, bhubaneswar ( 18 inches height letter ) , supplying and fixing of 3d letters assembled in a frame in english and odiya languages. the base of the individual letter will be aluminium composite panel. the face of the letter will be covered with 3mm thick 0 40 imported acrylic sheet, raising of each letter with 75 mm acrylic imported sheet as per given colour pattern. leds inside the letters should be powered by samsung leds or equivalent 12 v waterproof 1.5w / module, eu rohs compliant, lens shape, type circular, luminex flux 137im. 20 module pack. power supply of the leds are rain proof ip43, low carbon, rohs 12v 700 amp. using ms iron rectangular tube 50 x 25 mm for back frame for the letters and ms angle 50x50 x5 mm vertical post for the frame, using 40 x 40 x 5 mm ms angle for incline membrane back support to frame. height of the ms post on english language board will be 8 ft, odiya language board ms post height will be 5 ft. one year onsite warranty of the product. all provisions for setting and servicing arrangement with material shifted with supplying and fixing and transportation charges as per the direction of instructor. d ) 31 feet x 2.5 feet ms fabrication work with concrete foundations...

South Central Railway - Andhra Pradesh

33936832 supply of design, supply, fabrication and cutting of acrylic sheet of 2mm thickness.design, supply, fabrication and cutting of acrylic sheet of 2mm thickness., design, supply, fabrication and cutting of acrylic sheet of 2mm thickness and pasting of blue coloured vinyl stickering with different passenger amenities names in 2x2 glow sign boards. => limited...

Indian Army - Andhra Pradesh

33918753 bids are invited for mementos of size 275mm x 115mm x10 mm thick 8 mm after finishing made with acrylic sheet and printed thematter by uv the sample will approved by ge total quantity : 50...

South Central Railway - Andhra Pradesh

33627099 supply of unified sticker on acrylic sheetsupply of unified sticker on acrylic sheet, supply of unified sticker on acrylic sheet of 3mm thickness ( imported ) and matter to be printed and pasted on reverse side as per drg. no. k 3028 with four holes of 4mm dia for fixing purpose. acrylic sheet ( 300 nos of quantity in english and 300nos of quantity in hindi ) of make: margacipta, f.s or similar....

National Institute Of Design - Andhra Pradesh

33574528 supply of industrial goods for industrial design workshop supply of industrial goods for industrial design workshop , acrylic sheet ( 4ft x 3ft x 3mm, transparent, ) 1 nos , acrylic sheet ( 4ft x 3ft x 5mm, transparent, ) 1 nos , adhesive araldite 24 hours hardener ( 250g and 200g pack ) , cutting blade for scroll saw in 125 mm pinned scroll saw blade 10 nos , double sided tape 24mm x 3 meter ( foam tape ) ( recommended brand: 3m ) , dremel tool rotatory attachments ( type a ) in sanding drum set for dremel & all other rotary tools with 51 replaceable sanding bands & 6 rubber drum mandrels, 51pcs 5 pkts , dremel tool rotatory attachments ( type b ) in 105pc rotary tool accessories kit mini drill bit set with 3.2mm mandrel in electric drill with 6pcs / set mini hss circular saw blade rotary tool for metal cutter 5 pkts , fevicol standard ( 1 kg ) , foam board ( 4 ft x 4 ft x 3mm ) , masking tape 2 inch 5 nos , mdf ( 8 x 4 ft ) in t = 35 mm 1 nos , mdf ( 8 x 4 ft ) in t = 6 mm 1 nos , mdf ( 8 x 4 ft ) in t = 9 mm 1 nos , mdf board ( 8ft x 4 ft x 25 mm sheet ) 1 nos , nc putty ( brand: esdee ) 1 kg pack , nc putty in grey putty 10 kg , nc thinner in thinner for cellulose nitrate based paints and lacquers, as per is:5667.1970 1 liters , oil danish oil linseed oil for wood finishing & restoration ( 1 ltr ) , oil danish oil linseed oil for wood finishing & restoration ( 1 ltr ) , polystyrene sheet ( hips ) ( 4 ft x 4ft x 1 mm, transparent ) 1 nos , pu thinner 1 liter , putty blades 10 nos , teak wood ( 140 160 inch x 3 4 inch x 3 4 inch ) in yke grade 1 scantling teak wood, size 140 160 inch x inch 3 4 1 nos...

Ministry Of Defence - Andhra Pradesh

33288946 bids are invited for ebonite rod dia 25mm , acrylic sheet black 10 mm thickness , acrylic sheet black 12 mm thickness , acrylic sheet white 3 mm thickness , hss drill bits dia 25 mm , hss drill bits dia 3 mm , hss drill bits dia 33mm , hss drill bits dia 4mm , hss drill bits dia 42mm , hss drill bits dia 5mm , hss drill bits dia 52mm , hss drill bits dia 6mm , hss drill bits dia 65mm , hss drill bits dia 8mm , hss drill bits dia 85mm , solid carbide drill bits dia 6mm , solid carbide drill bits dia 8mm , solid carbide drill bits dia10mm , solid carbide drill bits dia 5mm , solid carbide drill bits dia 33mm , solid carbide drill bits dia 42mm , solid carbide drills bits dia 68mm , solid carbide drills bits dia 85mm , hss tap sets bsp with centring 1 by 4 inch x 19 tpi , hss tap set with centring m 3 x point 5mm , hss tap sets with centring m 4 x point 7mm , hss tap sets with centring m5 x point 8mm , hss tap sets with centring m 6 x 1mm , hss tap sets with centring m 8 x 125mm , hss tap sets with centring m10 x 15mm , hss tap sets with centring m12 x 175mm , hss tap sets with centring m14 x 2mm , hss tap sets bsp with centring 3 by 8 inch x 16tpi , hss tap sets bsp with centring 1 by 2 inch x 12tpi , hss tap sets bsp with centring 5 by 8 inch x 14tpi , hss tap sets bsp with centring 3 by 4 inch x 14tpi , hss dies with centring m6 , hss dies with centring m8 , hss dies with centring m10 , hss dies with centring m12 , hss tap set npt 1 by 4 inch , hss tap set npt 3 by 8 inch , hss tap set npt 1 by 2 inch , drill sleeve mt1 , drill sleeve mt2 , drill sleeve mt3 , drill sleeve mt4 , tap wrench with handel , tap wrench and handle , hack saw blade , buffing wheel jute and rough , buffing wheel terry cotton and smooth , buffing soap green and smooth , buffing soap black rough , buffing wheels non woven , buffing machine 1hp 1phase , measuring exterior diameter , measuring interior diameter , lever arm test indicator , measuring interior diameter four inch , manual crimper eight inch , manual crimper six inch , steel rule , metalworking tool , rigid metal surface , fish tail gauge , thread pitch gauge , inner fillet gauge , reamer wrench set eight inch , reamer wrench set ten inch , core cut machine , gloves , safety glass , still son wrench , material removal equipment , conical hole equipment , threading sets 3 , threading sets 4 , threading sets 5 , threading sets 6 x 1 , pitch involute cutter , 6 inch bastard cut , 8 inch bastard cut , 6 inch bastard cut rough , 8 inch bastard cut rough , metal face cutter smooth , metal face cutter rough , metal face cutter bastard , triangle metal face cutter smooth , triangle metal face cutter rough , equivalent cutting metal , marking tools instrument , metal measuring tool , rectangular metal blocks , metal blocks clamp , double ended round metal shaft , lathe center...

East Coast Railway - Andhra Pradesh

33261856 supply of four dot test specifications:hrn worth four dot test no glass no wood light black acrylic sheet used for new improved&modified hrn worth four dot teatfour dot test specifications:hrn worth four dot test no glass no wood light black acrylic sheet used for new improved&modified hrn worth four dot teat,four dot test specifications:hrn worth four dot test no glass no wood light black acrylic sheet used for new improved&modified hrn worth four dot teat or similar item with exact same specification....

South Central Railway - Andhra Pradesh

32878622 supply of supply, design & development of led signage display boards of 97 sq. ft. with variable sizes of trans lit print aluminum frame work clamp model fixing with acrylic sheet face of 2mm thickness as follows. 1) size: 3 x 1 1/2 feet. qty = 03 nos. 2) size: 3 x 2 feet. qty = 03 nos. 3) size: 4 x 2 feet. qty = 02 nos. 4) size: 2 x 1 1/2 feet. qty = 04 nos. 5) size: 2 1/2 x 5 feet. qty = 03 nos. note: 1) sample is to be got approved before bulk supply. 2) please ensure to follow & comply the eco friendly measures in pursuance of green co policy.supply, design & development of led signage display boards of 97 sq. ft. with variable sizes of trans lit print aluminum frame work clamp model fixing with acrylic sheet face of 2mm thickness as follows. 1) size: 3 x 1 1/2 feet. qty = 03 nos. 2) size: 3 x 2 feet. qty = 03 nos. 3) size: 4 x 2 feet. qty = 02 nos. 4) size: 2 x 1 1/2 feet. qty = 04 nos. 5) size: 2 1/2 x 5 feet. qty = 03 nos. note: 1) sample is to be got approved before bulk supply. 2) please ensure to follow & comply the eco friendly measures in pursuance of green co policy.,supply, design & development of led signage display boards of 97 sq. ft. with variable sizes of trans lit print aluminum frame work clamp model fixing with acrylic sheet face of 2mm thickness as follows. 1) size: 3 x 1 1/2 feet. qty = 03 nos. 2) size: 3 x 2 feet. qty = 03 nos. 3) size: 4 x 2 feet. qty = 02 nos. 4) size: 2 x 1 1/2 feet. qty = 04 nos. 5) size: 2 1/2 x 5 feet. qty = 03 nos. note: 1) sample is to be got approved before bulk supply. 2) please ensure to follow & comply the eco friendly measures in pursuance of green co policy....

South Central Railway - Andhra Pradesh

32834234 supply of supply of unified sticker on acrylic sheetsupply of unified sticker on acrylic sheet,supply of unified sticker on acrylic sheet of 3mm thickness (imported) and matter to be printed and pasted on reverse side as per drg. no. k 3028 with four holes of 4mm dia for fixing purpose. acrylic sheet (300 nos of quantity in english and 300nos of quantity in hindi) of make: margacipta, f.s or similar....

Ministry Of Defence - Andhra Pradesh

32743304 bids are invited for ebonite rod dia 25mm , acrylic sheet black 10 mm thickness , acrylic sheet black 12 mm thickness , acrylic sheet white 3 mm thickness , hss drill bits dia 25 mm , hss drill bits dia 3 mm , hss drill bits dia 33mm , hss drill bits dia 4mm , hss drill bits dia 42mm , hss drill bits dia 5mm , hss drill bits dia 52mm , hss drill bits dia 6mm , hss drill bits dia 65mm , hss drill bits dia 8mm , hss drill bits dia 85mm , solid carbide drill bits dia 6mm , solid carbide drill bits dia 8mm , solid carbide drill bits dia10mm , solid carbide drill bits dia 5mm , solid carbide drill bits dia 33mm , solid carbide drill bits dia 42mm , solid carbide drills bits dia 68mm , solid carbide drills bits dia 85mm , hss tap sets bsp with centring 1 by 4 inch x 19 tpi , hss tap set with centring m 3 x point 5mm , hss tap sets with centring m 4 x point 7mm , hss tap sets with centring m5 x point 8mm , hss tap sets with centring m 6 x 1mm , hss tap sets with centring m 8 x 125mm , hss tap sets with centring m10 x 15mm , hss tap sets with centring m12 x 175mm , hss tap sets with centring m14 x 2mm , hss tap sets bsp with centring 3 by 8 inch x 16tpi , hss tap sets bsp with centring 1 by 2 inch x 12tpi , hss tap sets bsp with centring 5 by 8 inch x 14tpi , hss tap sets bsp with centring 3 by 4 inch x 14tpi , hss dies with centring m6 , hss dies with centring m8 , hss dies with centring m10 , hss dies with centring m12 , hss tap set npt 1 by 4 inch , hss tap set npt 3 by 8 inch , hss tap set npt 1 by 2 inch , drill sleeve mt1 , drill sleeve mt2 , drill sleeve mt3 , drill sleeve mt4 , tap wrench with handel , tap wrench and handle , hack saw blade , buffing wheel jute and rough , buffing wheel terry cotton and smooth , buffing soap green and smooth , buffing soap black rough , buffing wheels non woven , buffing machine 1hp 1phase , measuring exterior diameter , measuring interior diameter , lever arm test indicator , measuring interior diameter four inch , manual crimper eight inch , manual crimper six inch , steel rule , metalworking tool , rigid metal surface , fish tail gauge , thread pitch gauge , inner fillet gauge , reamer wrench set eight inch , reamer wrench set ten inch , core cut machine , gloves , safety glass , still son wrench , material removal equipment , conical hole equipment , threading sets 3 , threading sets 4 , threading sets 5 , threading sets 6 x 1 , pitch involute cutter , 6 inch bastard cut , 8 inch bastard cut , 6 inch bastard cut rough , 8 inch bastard cut rough , metal face cutter smooth , metal face cutter rough , metal face cutter bastard , triangle metal face cutter smooth , triangle metal face cutter rough , equivalent cutting metal , marking tools instrument , metal measuring tool , rectangular metal blocks , metal blocks clamp , double ended round metal shaft , lathe center...

Department of Higher Education - Andhra Pradesh

31604799 procurement of laboratory equipment for civil mechanical labs 1 crushing value apparatus(cylinder with open ends internal diameter 15.2cm, square base plate, plunger having 15cm, with a hole provided a cross the stem of the pluger. shiva scientific instruments make 1 2 aggregate impact tester ( cylinder with internal diameter 75 mm and depth 50mm). shiva scientific instruments make 1 3 pycnometer (1000ml capacity). shiva scientific instruments make 2 4 los angeles abrasion testing machine with charges(steel balls). shiva scientific instruments make 1 5 length gauge with isi certification mark is:2386 (part i) . shiva scientific instruments make 2 6 thickness gauge with isi certification mark is:2386 (part i) . shiva scientific instruments make 2 bitumen penetration test setup 7 universal penetrometer. shiva scientific instruments make 1 8 penetration needle. shiva scientific instruments make 2 9 transfer dish made of copper. shiva scientific instruments make 1 10 aluminium sample containers, set of two . shiva scientific instruments make 1 11 ductility testing machine with digital temp indicator. shiva scientific instruments make 1 12 ring and ball apparatus. shiva scientific instruments make 1 13 viscometer: standard tar viscometer, 10mm cup and ball valve. shiva scientific instruments make 1 concrete technology 1 standard set of sieves for coarse aggregate sieve g.i. frame 45cm dia 63mm,50 mm,40 mm,31.5 mm ,25 mm,20 mm, 16 mm,12.5mm,10mm,4.75 mm,pan and cover. shiva scientific instruments make 1 2 standard set of sieves for fine aggregate sieve brass frame 20cm dia 4.75mm,2.36mm,1.18 mm,600 micron,300 micron,150 micron,75 micron, pan and cover. shiva scientific instruments make 1 4 3 vicat apparatus with isi certification mark, mould 80 mm dia and 40m depth with non porus plate three needles a)plunger 10mm dia 50mm long,b)1mm square needle c)annular collar needle. . shiva scientific instruments make 1 4 specific gravity bottle 50 ml capacity normal type with narrow mouth. shiva scientific instruments make 2 5 specific gravity bottle 100 ml. shiva scientific instruments make 2 6 le chatelier apparatus, with isi certification mark:split cylinder of spring brass 30mm diameter and30mm high withindicator arms 165mm long with point ends,two glass plates and flask. shiva scientific instruments make 2 7 compaction factor apparatus specifications : i) upper hoper a)top internal diameter 250mm b)bottom internal diameter 125mm c)internal height 275mm ii)lower hopper: a)top internal diameter 225mm b)bottom internal diameter 125mm c)internal height 225mm iii)receiever :a)internal diameter 150mm b)internal height 285 mm c) radius of bottom fillet 20 iv)distance between bottomof upper hoppper and bottom of lower hopper 200mm . v)distance between bottomof lower hoppper and bottom of receiver 200mm. shiva scientific instruments make 1 8 slump test apparatus with testing rod and base plate. shiva scientific instruments make 1 9 pycnometer (1000)ml. shiva scientific instruments make 2 10 analog compression testing machine, capacity 1000kn . shiva scientific instruments make 1 11 mould, cast iron, for 150mm cube with isi certification mark . shiva scientific instruments make 9 12 cylindrical mould, cast iron, split lengthwise 150mm dia x 300mm high. shiva scientific instruments make 6 13 mould, cast iron for 70.6mm cube . shiva scientific instruments make 6 14 heavy duty weighing machine(150 kg capacity) with weights (capacity1x10grm). shiva scientific instruments make 1 15 light weighing machine (capacity 6kgs). shiva scientific instruments make 1 16 tamping rod, steel, 16mm dia x 600mm length with isi certification mark, is:10086. shiva scientific instruments make 1 17 density basket : wire basket of not more than 6.3mm mesh or a perforated cantaine with of convinent size with wire hangers.. shiva scientific instruments make 1 18 trowels ( 200mm long blade weight 210+10gms). shiva scientific instruments make 4 5 19 measuring cylinder pvc 1000 ml. shiva scientific instruments make 2 geotechnical engineering 1 liquid limit device, hand operated, with casagrande grooving tools and gauge block. shiva scientific instruments 1 2 plastic limit set comprising of glass plate, brass rod, spatula, moisture tin & porcelain dish. shiva scientific instruments 1 3 shrinkage limit set shiva scientific instruments the apparatus consists of prong plate of acrylic sheet 1.5mm thick & 75mm square, shrinkage dish, glass cup, porcelain evaporating dish, steel striaght edge and graduated glass cylinder 25ml x 0.5ml 1 field density apparatus 4 core cutter shiva scientific instruments 1 5 sand pouring cylinder apparatus,100 mm dia shiva scientific instruments 1 6 set of sieves 20 cm dia brass, 4.75 mm ,2.36mm,1.18 mm, 600 microns, 425 microns, 300 microns,150 microns,75 microns,pan and cover shiva scientific instruments 1 7 hydrometer shiva scientific instruments 1 permeability apparatus 8 laboratory permeability apparatus shiva scientific instruments 1 9 overhead tank, 110 ltr. capacity shiva scientific instruments 1 10 laboratory california bearing ratio test apparatus, motorised, three speed shiva scientific instruments. 10 tons loading frame with proving rings of 0.5 tons and 5 tons capacity shiva scientific instruments 1 11 consolidation apparatus, single gang with dial gauge, 0.002x5 mm shiva scientific instruments 1 12 digital laboratory oven a) supplied with air circulation fan for uniform circulation of air. b) outer chamber: double walled construction outer body made of mild steel powder coated c) internal chamber: inner body made of stainless steel. provided with glass wool insulation in between two walls. d)temperature range 50 degc to 250degc. accuracy: + / 2 degc.temperature provided with gi wire mesh shelves. heating elements are made of nicrome. e)rating watts:1750 watts internal dimensions : 45 cm x 45 cm x 45cm (make shiva scientific instruments 1 13 laboratory vane shear apparatus, motorized shiva scientific instruments 1 6 14 pychnometer shiva scientific instruments 1 15 wooden hamer 2 16 measuring cylinder 200ml pvc 2 17 chaina dishes 2 18 steel tins big size 6 19 steel tins small size 6 surveying field work 1 & 2 1 metric chains 20meters. ak international make 4 2 metric chains 30meters. ak international make 4 3 metallic tape 15m. ak international make 4 4 metallic tape 30m. ak international make 4 5 ranging rods (2m length). ak international make 12 6 ranging rods (3m length). ak international make 12 7 cross staff. ak international make 3 8 plan table with tripod & all accessories. ak international make 2 9 arrows 12” (10nos). ak international make 3 10 prismatic compass brass with tripod stand. ak international make 2 11 auto level with tripod stand & aluminum staff 6mtrs, . ak international make 3 12 transit theodolite with tripod stand & aluminum staff 4mtrs. ak international make 4 engineering geology 1 streak plates (70 x 70 x 6mm) 10 wooden structural geology models 2 wooden structural geology models: folds & faults (rr086) 1 3 wooden structural geology models: glacial system (rr094) 1 4 wooden structural geology models: deformation of the earth(folds & faults)(rr091) 1 5 wooden structural geology models: river in action (water cycle) (rr074) 1 6 wooden structural geology models: ground water(rr100) 1 wooden crystallographic models 7 wooden crystallographic models gm 1: water fall, gorge/canyon, rivers meanders, flood plains, oxbow & natural leaves, river delta, artesian water, depositional, three stages of the karst land (set of 8no.s) 1 8 wooden crystallographic models gm 2: sea waves, glaciers, rift valley, ground water, faults, folds, volvanoes, action of wind(set of 8no.s) 1 rock forming minerals (no.s 52)(ge156) 9 rock forming minerals (no.s 52)(ge156): quartz group,feldspar group, garnet group, mica group & talc, chlorite, olivine, kyanite, asbestos, tourmelene, calcite, gypsum, etc… 89 ore forming minerals(no.s 89)(ge157) 7 10 ore forming minerals(no.s 89)(ge157): magnetite, hematite, pyrite, pyralusite, graphite, chromite, etc… 24 11 identification of rocks samples (no.s 24)(ge155): igneous rocks – types of granite, pegmatite, gabbro, dolerite, syenite, granite poryphery, basalt, etc. sedimentary rocks – sand stone, ferrugineous sand stone, lime stone, shale, laterite, conglamorate, etc. metamorphic rocks – biotite – granite gneiss, slate, muscovite & biotiteschist, marble, khondalite, etc. 52 12 rock samples of igneous rocks(set 15). bharat educational stores make 1 13 rock samples of sedimentary rocks(set 15). bharat educational stores make 1 14 rock samples of metamorphic rocks(set 15). bharat educational stores make 1 15 mineral map of india 3d/normal. bharat educational stores make 1 16 rock forming mineral 3d/normal. bharat educational stores make 1 17 various types of rocks 3d/normal 3d bg009 . bharat educational stores make 1 18 earth layers 3d/normal. bharat educational stores make 1 19 folds &falts 3d/normal 3d rr086. bharat educational stores make 1 20 3d globe model of earth internal structure(m 3404 3). bharat educational stores make 1 21 maps by geological survey of india(gg008,gg009,gg0011,gg0012). bharat educational stores make 4 22 plastic specimen trays: size outside:12 x 12 x 2 cms approx; and inside: 10 cms x 8 cms: . bharat educational stores make 210 environmental engineering 1 digital ph meter with electrode (lcd display). systronics make 1 2 digital nephelo turbidity meter. systronics make 1 3 digital conductivity meter with ceil . systronics make 1 4 muffle furnace (9000c) digital. kemy make 1 5 jar test apparatus with minimum 6 stirrers. kemy make 1 6 dissolved oxygen meter with memory of 50 results (portable). kemy make 1 7 b.o.d incubator [cooling incubator 90 ltrs. kemy make 1 8 water still ss 6 ltr/hr. kemy make 1 9 precision balance 0.001 gm 200 gm. kemy make 1 glass ware : 10 low form beaker with spout 250ml. borsil make 6 11 wash bottle 500 ml. borsil make 6 12 burette clamp rotatable type 6” rod die cast zinc alloy, powder coated with boss heads. borsil make 8 13 retort stand 300 x 200 mm centre hole. borsil make 8 8 14 burettes with glass stopcock, class b 50ml. borsil make 12 15 volumetric pipettes class b 10ml. borsil make 8 16 nessler cylinders 50ml. borsil make 8 17 b.o.d. bottles 300ml. borsil make 8 18 cylinders class b, hexagonal base, pour out 50ml. borsil make 6 19 cylinders class b, hexagonal base, pour out 100ml. borsil make 6 20 measuring cylinder 100 ml (hexagonal). borsil make 6 21 volumetric flasks class b, narrow mouth, clear 1000ml. borsil make 4 22 reagent bottles narrow mouth with screw cap 1000ml. borsil make 3 23 glass filter funnel short stem 75mm. borsil make 4 24 volumetric pipette 5ml capacity. borsil make 4 requirement of laboratory equipment for the department of mechanical s.no. list of equipments quantity mechanics of solids 1 analog universal testing machine(utm) , specifications:1.capacity : 1000kn 2.maximum pressure of 200kgf/cm2 3.elongation scale with a minimum graduation of 1 mm 4.the control panel with drive motor and an oil tank, control valves a pendulum dynamometer. a load indicator system and an autographic recorder. 5.a technical manual accompanies the unit make: enkay enterprises 1 2 spring testing (compression, tension test) specifications: 1.capacity 500 kg / 5000n 2.diameter of compression spring :200mm 3.free length of tension spring: 300mm 4.pitch :5mm 5.elongation / deflection / least count 1 ft scale(300mm) 6.a technical manual accompanies the unit make: enkay enterprises 1 3 simply supported beam and cantilever beam spdecifications: 1.beam length: 1000 mm 2.thickness of the beam: 5 mm 3.width of the beam: 7 mm 4.dail guage: 0 10mm scale, 0.1mm least count 5.load cells 0.5, 1, 2, 3, 4 kg 6.robust frame 7. a technical manual accompanies the unit make: enkay enterprises 1 9 fluid mechanics & hydraulic machinery 1 jet apparatus specifications: 1. 3 sets of vanes (concave, inclined and flat vanes) 2.sump tank dimensions – 600x500x600mm polypropelene (rust proof & acid resistance) 3.measuring tank – 500x200x600 mm 4. all pumps 1hp 3000lph are of kirloskar or crompton make (as required by you.)pipeline size – 1” suction and 1” delivery 5. imported acrylic piezometer is provided for collecting tank 6. stop watch (digital) wherever necessary 7. digital rpm indicator provided foron line speed measurement 8. a dp switch is provided with a main chord (5amps or 15 amps) 9. all pipelines and fittings made up of b class (isi) 10. all control valves in the pipeline are made of gunn metal (isi) 11. for collecting tank drain valves are of pvc 12. a technical manual accompanies the unit 13.force indicator with censor hydromec panel mounting type make: hydromec engineers 1 2 francis turbine specifications: 1.loading device :rope break loading with drum size 200 mm provided with spring balance 2.no. of aero foil type gun metal guide vanes: 2 to 14 3.thickness of aero foil: 20 mm 4.main shaft made of gun metal of diameter: 150 to 175 mm 5.water supply/circulating pump to turbine : kirloskar make 7.5 hp 30 mtrs head 6.sump tank dimensions: 1250 mm x 650 mm x 650 mm 7. assembly housed in ms channel of size 100 mm x 50 mm x 6 mm thick frame 8. digital rpm indicator provided for speed measurement of turbines 9. d o l starter of l&t make with ml2 relay of 6 to 20 amps fitted with pressure guage etc 10. all pipelines and fittings made up of b class (isi) 11. all control valves in the pipeline are made of gun metal (isi) 12. a technical manual accompanies the unit make: hydromec engineers 1 10 3 pelton wheel (2hp capacity,closed circuit)net head : 25 m. discharge : 500 lpm normal speed : 1000 rpm. power : 1 kw, capacity: 2hp, closed circuit the unit consists of the following : transparent rainbow shape casing with 12 to 14 nos of gunmetal brickets fitted circularly along with circumference of runner, circular gate fitted with nozzle (gun metal) with wheel arrangement for changing gate opening position for 50%, 75% and 100% transparent acrylic front flange (to viewjet and buckets) brake arrangement: consists of cast iron brake drum machined & polished, cooling water supply pipe from turbine inlet, internal scoop, discharge pipe, spring balance rope brake & loading dead weights. centrifugal pump set suitable for the supply of water for the size of 2 (50mm) to discharge 500 lpm at a total head of 25m coupled to 5hp, 1440/2880 rpm induction motor 3 phase 400/440v ac supply. flow measuring unit: a 50mm (2) venturimeter/ orificmeter with double column differential manometer (without mercury) on a panel board to measure the difference of pressure. sump tank: 1250x650x650mm with pump connection at bottom and drain connection with ms powder coated channel frame starter switch: pipeline with gate valve & foot valve etc. make: hydromec engineers 1 4 multistage centrifugal pump, three stage, variable speed centrifugal pump test rig with 1 hp 3ph, 415, ac motor 2000 to 3000 lph kirloskar/ crompton make. centrifugal pump with 1” suction and 1” delivery. pressure & vacuum gauges are provided to measure delivery and suction head respectively. energy meter is provided to measure the power input. 1. sump tank dimensions – 600 mm x 500 mm x 600 mm collecting tank – 500 mmx 200 mmx 600 mm of polypropylene material 10mm thick. 2.piezometer for measurement of discharge acrylic imported with scale engraved 3. imported acrylic manometer of 300mm with mercury is provided (wherever necessary)/ water column guage 0 10000 mm of water 4. digital rpm indicator provided foron line speed measurement 5. a dp switch is provided with a main chord (5amps or 15 amps) 6. all pipelines and fittings made up of b class (isi) 7. all control valves in the pipeline are made of gun metal (isi) 8. for collecting tank drain valves are of pvc 9. a technical manual accompanies the unit make: hydromec engineers 1 metallurgy & material science lab 11 1 binacular microscopes, eye piece: wf10x stage: mechanical stage 120mm x 132 mm with x y movement objective: achromatic stage 4x, 10x, 40x (s/l) head binocular head with 45 degree inclined and 360 degree rotatable with all optics are anti fungus coated prisms condenser na 1.25 with iris diaphragm focusing coarse and fine focusing system illumination in built 6v/20w halogen light source with power regulator or plano concave mirror attachment 1 2 muffle furnace (1200 oc), max temoerature: 1100°c digital type rectangular electric furnace with light weight and fast heating system the body made of thick ms sheet duly powder coated with iron angles. working temparature of 900c controlled by micro processor based digital temperature controller fitted with thermal fuse and thermo comple with ceramic wool insulation of 6x6x9 chamber kw 3.3 make: kemi 1 3 jominey end quench test, 1. standard test piece dimensions dia 25mm ± 0.5 x length, 100 ± 0.5mm. 2. inside vertical water supply pipe. 3. height of free water jet (without test piece in position) 65 ± 10mm. 4. distance from tip of nozzle to the bottom of test piece should be 12.5 ± 0.5mm approx.5. power supply: single phase 230 volts 50 hz a.c. 6. the nozzle, specimen holders and pipes for maintaining specific water head are included make: enkay enterprises 1 4 spiecmens(1 set) make: enkay enterprises 1 5 ammonia solution(2lt) make: enkay enterprises 1 thermal engineering lab 12 1 petrol engine 4 – stroke 4 – cylinder performance test and morse teston 4/3 cylinder –stroke petrol enginewith hydraulic/ eddy current dynamometer loading. 1.engine: multi cylinder four stroke petrol engine of 1000 cc developing about 10 hp at 2000 rpm. 2.make : suzuki make 3/4 culinder variable speed 3. dynamometer: the engine is coupled to hydraulic brake dynamometer capacity of 20 hp at 2000 rpm. 4. fuel measuring device: fuel tank mounted on sturdy iron stand, burette tube, three way cock, connecting tube & a stop clock hydromec engineers make 5.calorimeter: double pipe heat exchanger to measure the heat goes through exhaust gases. 6.air intake measurement: air intake reservoir of size 0.4 x 0.4 x 0.7 m. with orifice plate, u tube manometer of 0.3 m height for the measurement of air flow rate. 7.12 channel digital temperature indicator: with set of thermocouples. 8. accessories :an ignition switch, a self starter, battery ammeter, a throttle (accelerator) control, special arrangements by switches for cutting of ignition of each cylinder for ‘morse test’ all instruments mounted on suitable panel board. 1 2 4 –stroke single cylinder diesel engine with rope brake loading : diesel engine high speed : study model of high speed 4 stroke single cylinder diesel engine water cooled kirloskar make 1500 rpm with mounting base . performance test and heat balance sheet on 4 –stroke single cylinder diesel engine with rope brake dynamometer . make: hydromec engineers.3. dynamometer : the engine is coupled with hydraulic brake dynamometer of 30 hp capacity at 1500 rpm water arrangement is also provided to this dynamometer 4. fuel measuring device : fuel tank mounted on sturdy iron stand, burette tube, three way cock, connecting tube & a stop clock. 5. calorimeter : double pipe heat exchanger to measure the heat carried away by exhaust gases. 6. air intake measurement : air intake reservoir of size 0.4 x 0.4 x 0.8 m. with orifice plate, u tube manometer of 0.3 m height for the measurement of air. 7. cooling arrangement : cooling water measurement by rotameter to determine the discharge of cooling water. external cooling water supply system. 8. 12 channel digital temperature indicator : with thermocouples. 9. following accessories are provided with test rig. an ignition switch, a self starter ammeter, a throttle (accelerator) control. all instruments mounted on a suitable panel board. 1 13 3 cut models for 4 stroke & 2 stroke ic engine to study parts & to analyse valve timing and port timing diagram: 1.for valve timing diagram: 4 stroke 1 cylinder engine cut in vertical to expose inlet valve, exhaust valve, fuel injector, crank shaft fuel pump oil pump etc 2.for port timing: actual cut model of 2 stroke petrol engine to empote parts like head, cylinder, piston, inlet outlet transfer parts etc 3.cut section: 4 stroke 1 cylinder petrol engine to show inlet valve exhaust valve piston cylinder head etc. make: hydromec engineers 1 4 i/c engine performance test on 2 stroke petrol : equipment required : petrol engine 2 stroke 1 cylinder air cooled petrol engine. start: by kick start electric start rope break: hydromec engineers make test component: engine test phase: single fuel type: petrol voltage 220v ac air box: ms number of cylinders: single speed: 1500 rpm fuel tank: 5 liter bore size: 90 make: hydromec engineers 1 5 dis assembly / assembly of different parts of two wheelers. 3 wheelers & 4 wheelers. tractor & heavy duty engines covering 2 stroke and 4 stroke, si and ci standards parts make: hydromec engineers 1 6 single/two stage reciprocating air compressor test rig make: hydromec engineers 1 production technology lab 1 arc welding unit : enkay enterprises make. output current range: 450 amps; phase: 3 phase; duty cycle: 60%; insulation: f; efficiency: 85%; technology: igbt 1 2 gas welding unit: enkay enterprises make. wire brush (6nos), hand gloves (12 sets), chipping hammer (2nos), spark lighter (2nos) 1 3 injection moulding manual hand operated machine with all standard accessories.: enkay enterprises make. die set, plastic granules 1 4 blow moulding manual hand operated machine with all standard accessories. : enkay enterprises make. blow moulding machine with compressor attachment 1 5 mould and metal casting preparation: enkay enterprises make. cope box, drag box, bottom board, open hearth furnace, blower, cruicible, ladle 1 14 6 pattern design and making: enkay enterprises make. bench vice, saw, metal jack plane, marking tools, chisel, rack file, t square steel rule 1 machine tools lab 1 radial drilling machine with all standard accessories. capacity 40mm, spindle nose – mt 4, motor 1 hp, size of base plate – (88 x 54 x 9) cm motor 1 hp, 3ph 1440 r.p.m electric motor make: amarjyothi machinery/ crompton 1 2 slotting machine with all standard accessories stroke length 10, longitudinal movement 8, cross movement 6, motor 1 hp, 3ph 1440 r.p.m electric motor make: amarjyothi machinery/ crompton 1 3 flame hardened bed lathe machine with all standard accessories spindle bore: 40mm, length of bed 2.5, motor 2 hp, width of bed 10, rpm 1425 motor 1 hp, 3ph 1440 r.p.m electric motor with 8 size 4jw dgchegue make: amarjyothi machinery/ crompton 1 4 shaper machine with oil pump, vice and other standard accessories working stroke – 305 mm, length of ram 660 mm, motor 1 hp, 3ph 1440 r.p.m electric motor make: amarjyothi machinery/ crompton 1 5 heavy duty universal milling machine with suitable vertical head & all other standard accessories. size: 0 a, working surface (1070 x 250) mm, x axis 760 mm, z axis 390 mm, quick travel – 126 mm motor 1 hp, 3ph 1440 r.p.m electric motor make: amarjyothi machinery/ crompton 1 6 heavy duty floor model type wood turning lathe machine with all standard accessories. machine capacity: 3, 4, 5 & 6 feet centre height: 6.5 , face plate diameter: 7 length of bed: 4, 5, 6 & 8 feet motor 2 hp, 3ph 1440 r.p.m electric motor make: amarjyothi machinery/ crompton 1 dynamics of machinery lab 15 whirling of shaft apparatus hydromec engineers make. electrical supply: 220 vac to 240 v ac phase to neutral or phase to phase 50 hz to 60 hz at 1 a net dimensions and weight: main unit: 1460 mm long x 270 mm high x 400 mm front to back and 35 kg control and instrumentation unit: 400 mm wide x 180 mm high x 360 mm front to back and 8 kg mild steel shafts: 1 x 3 mm diameter x 750 mm 1 x 3 mm diameter x 900 mm 1 x 6 mm diameter x 900 mm 1 x 7 mm diameter x 900 mm (for use with the weights) weights: 2 x 300 g 1 x 400 g 1 x 300 g with hole (eccentric weight) a technical manual accompanies the unit shaft end conditions: both ends directionally free & both ends directionally fixed 1 motorized gyroscope hydromec engineers make. specifications 1.rotor dia. 250mm free about 3 axis of rotation driven by variable speed motor. 2. dimmerstat to control the motor speed. 3. stopwatch to measure the angular speed about the axis of precession. 4. weights – 0.2 kg, 0.5 kg and 1 kg. 5. tachometer for speed measurement 6. 220v stabilized ac supply with earthing connection. 7.bench area – 0.5 x 0.5m at working height. 8. a technical manual accompanies the unit 1 16 vibration lab no i: to determine the frequency of un damped free vibration of an equivalent spring mass system. specification:vibration lab machine for performing experiments on longitudinal and torsional vibrations with control panels and speed indicators.rpm measurement: digital rpm indicator with proximity sensor ordinary chart recorder: for recording frequency and amplitude of vibration. stop watch: electronic stop watch. floor space: 2.5 m x 2 m approx electricity supply: 230 v ac, single phase, 0.5 kw exciter unit: with fhp dc motor with speed control facility the whole set up is ingeniously designed and schematically arranged on a powder coated rigid structure control panel: digital rpm indicator standard make on/off switch, mains indicator etc. speed control unit. hydromec engineers make 1 vibration lab no ii: to determine the frequency of damped force vibration of a spring mass system vibration lab machine for performing experiments on longitudinal and torsional vibrations with control panels and speed indicators. exp.1 to study of force vibration for various amount of damping. 1.bar type oscillator: lxwxh:700 mm x 25 mm x 12 mm, 2.1,6 kg coil spring 0,75n/mm, 1,5 n/mm, 3,0 n/mm 3. exciter frequency: 0 50hz 4.electronically controlled imbalance of the balance exciter: 0 1000mmg 5.stroke of the displacement exciter: 20mm 6.damping constant: 5 15ns/m, oil filled mechanical drum recorder 7.feed: 20mm/s, 230v, 50hz 1 phase, 230v, 60hz 1 phase, 120v, 60hz 1 phase dimensions : lxwxh: 1200mmx600mmx1400 mm weight: 125 kg 1 17 cam and follower apparatus:to plot follower displacement vs cam rotation for various cam follower systems specifications: to determine follower displacement against angular rotation of a cam; hence derive velocity and acceleration diagrams and determine the maximum acceleration of the follower; for a variety of cams and followers. hydromec engineers make. 1. offset roller follower 2. the bench mounted unit consists of a dial gauge for the measurement of displacement and a protractor scale and bracket for measurement of angular rotation. 3. cams include: tangent cam; constant acceleration cam; simple harmonic motion cam. 4. followers include: roller; knife edge. 5. an instruction manual for student and lecturer is provided. 6. dimensions and weights (without fittings, followers and cams): 250 mmx 150 mmx 540 mm; 4.1kg (approx) 7. supplied complete with fittings, followers and cams: a lever follower on a support with a pointer and scale a flat follower 38 mm wide a uniform motion cam an eccentric cam 1 spur, helical, worm and bevel gears to study various types of gears spur, helical, worm and bevel gears. standard size gear wheels with standard dimensions hydromec engineers make 1 metrology & instrumentation lab 1 micrometer (0 25mm) outside measuring range: 0 25 mm (outside) hydromec make 1 2 micrometer (25 50mm) inside measuring range: 25 50 mm (inside) hydromec make 1 3 sine bar and slip guage roller distance: 100 mm table size: 130 mm x 30 mm hydromec make 1 4 tool makers microscope with depth measurement instrument magnification : 30x micrometer 50 mm diameter hydromec make 1 5 bevel protractor accuracy: 150 mm diameter: 70 mm hydromec make 1 6 machine alignment test on lathe and milling spirit level, gauge blocks, dial gauge hydromec make 1 instrumentation lab equipments pressure measurement dead weight pressure teste a) calibration of pressure gauges range 0 50 kgs/sqcmr using dead weight pressure tester and pressure transmitter with output display by digital pressure indicator hydromec make. pressure cell: sensor: strain gauges bonded on steel diaphragm for pressure measurement. type: diaphragm range: 10 kg/cm2 connection: through four cure shielded cable with the connector attached excitation: 10v dc accuracy: 1% linearity: 1% max over load: 150% mechanical connection: 1/4 inch bsp thread. indicator: display : 3 ½ digit seven segment led display is used for the indicator of 200mv full scale deflection to read +/ 1999’ excitation : 10 v dc accuracy : 1% tare : front panel zero adjustment through potentiometer power supply : 230 v +/ 10% 50 hz hydromec make 1 19 8 l.v.d.t module instrumentation trainer modules for displacement measuring to study the principles of displacement, l.v.d.t, inductive pick up module and capacitive and l.d.r. module, the whole set up is mounted on the powder painted table of size 800mm x 500mm x250mm hydromec make. indicator display: 3 ½ digit seven segment red led display of range 200mv for full scale deflection to read +/ 1999 counts excitation voltage: 1000 hz at iv operating temperature: +100 c to 550 c zero adjustment: front panel through potentiometer senstivity: 0.1 mm system in accuracy: 1% repeatability: 1% connection: through 6 core shielded cable with din connector. fuse: 250ma fast glow type. power: 230 v +/ 10%, 50 hz sensor range: +/ 10.0 mm excitation voltage: 1 to 4 khz at 1 to 4v linearity: 1% operating temperature: +100c to 550 c connection: through 6 core shielded cable provided along with the sensor of 2m length. calibration jig: micrometer to 0 to 25 mm length is mounted on the base. hydromec make 1 20 9 strain gauge module calibration of strain guage instrumentation trainer modules for strain gauge measurements for cantilever setup, control panel housing with digital indicator, arms 2or 4(full bridge/half bridge strain gauge length 5mm. overall length 10.mm size excitation size 2to5 volts. the whole set up is mounted on the powder painted table of size 800 mmx 500 mm x250 mm hydromec make. display range: 3 ½ digit red led display of 200 mv fsd to read up to +/ 1999 micro strain. gauge factor setting: 2.1 balance: potentiometer to set zero on the panel bridge excitation: 12v dc bridge configurations: full bridge max. load: 1 kg power: 230 v+/ 10% at 50hz with perfect grounding cantilever beam specification material: stainless steel beam thickness (1): 0.25 cm beam width (b): 2.8 cm beam length (actual): 22 cm youngs modulus (ε): 2x106 kg / cm2 strain gauge: foil type gauge gauge length (f): 5 mm gauge resistance (r): 300 ohms gauge factor (g): 2.01 hydromec make 1 21 10 speed measurement module: study and calibration of photo and magnetic speed pickups for the measurement of speed. the unit consists a fhp d.c variable motor with controller, speed can be measured using following transducers 1)photoelectric pick up sensor 2) magnetic pick up sensor necessary test points are provided on control panel to observe the out puts of amplifier, magnetic photoelectric pick ups, with digital indicator the whole set up is mounted on the powder painted table of size 800 mmx 500 mm x250 mm. measurement of speed sensor : a) magnetic pickup b) photoelectric maxi.rpm : 1500rpm motor speed control : 0 12v variable dc drive. tone wheels : a) for magnetic pikup : ms wheel of 2mm thick disk, on the circumference 60 teeths will be cut at equidistant. b) for photodiode : a small copper disk on which 60 slots will be etched at equidistant. 5 power : the instrument works at 230v 50hz supply. panel details: display : 4 digit seven segment led display to display up to 9999 counts. toggle switch : dpdt toggle switch to select the two sensors. pin sockets : to connect photodiode and magnetic pickup sensor the circuit : the circuitry is only a block diagram for the speed indicator with varies test points provide to test while experiment for the easy understanding various stages of the speed indicator. 1 11 study and calibration of rotameter for flow measurement this module is to measure the fow rate of fuid /water by rotametr , and the error is computed with actual flow, the set up consits of acric rotameter , sump tank , pump and measuring tank , hydromec make. 1. laboratory rotameter ld: measured substances: liquids and gases; accuracy class: 2.5 (compared to the upper limit of the range); operating temperature: –30 °с to +120 °с; scale length: 200 mm; cone pipe no g15, designed for water flow rate of 5 to 60 l/h connectivity: flexible piping (hoses). 2. sight target volume: v = 1.190 l (from the upper surface of the spindle of the crane to the mark on the throat). 3. stopwatch division value: 0.01 s. 4. thermometer range: 0 to 30 °c; division value: 1 °с. hydromec make 1 22 12 study and calibration of mcleod gauge for low pressure measurement. the module consits of pressure transmitter with strin guage mounted on pipe line pressursed, and the out put is measured by digital display unit, and error is computed at diiferent pressure range hydromec make. 1. mcleod gauge 2. low pressure system 3. any instrument which can measure low pressure pressure measurement tutor using mcleod gauge range: 0.01 micron to 50 mm of hg bulb, reservoir, capillary should be made of transparent material hydromec make 1 heat transfer lab 1 thermal conductivity of metal rod, the test setup is fitted with test specimen of rod size 25mm dia. 450 mm long. and digital control panel fitted with volt meter, ammeter, digital temperature indicator and dimmer start (1 set) hydromec make. the test setup is fitted with test specimen of rod size 25mm dia. 450 mm long. and digital control panel fitted with volt meter, ammeter, digital temperature indicator and dimmer start (1 set) diameter of the rod: 25mm length of the rod: 450mm dimmer stat: 10 amp, 230 volts digital temperature indicator: (0 300°c) temperature scanner: 8 channels thermocouple: k type (cr al) thermostat: 300°c digital ammeter & voltmeter heater: clamp heater, capacity 200 w, supply 230 v ac watt meter: 500watts 1 2 stefan boltzmann apparatus, the test setup is fitted with test specimen and control panel fitted with digital microprocessor based volt meter, ammeter, and digital and temperature indicator(1 set). disc diameter: 20mm mass: 4 grams thermocouple: k type watt meter range: (0 199°c) thermocouples: 3 nos 1 23 3 heat transfer through composite wall /slab, the test setup is fitted with three test specimen of size 300 mm dia . made up of hylam wood and m.s material with nichrome heater sandwiched between two plates. control panel fitted with digital microprocessor based volt meter, ammeter, and digital, temperature indicator and dimmer start. detail specifications are enclosed(1 set) hydromec make. heater type: flat heater heat input measurement: digital watt meter heater capacity: 500 watts diameter of the composite slabs: 150mm thickness of test plates: 12mm thermocouple: k type (cr al) temperature measurement: digital temperature indicator (0 199°c) temperature scanner: 8 channels 1 4 heat transfer in natural convection, the test setup is fitted with test specimen of size 38 mm dia x 50 cm long with cartridge type nichrome heater. and control panel fitted with digital microprocessor based volt meter, ammeter, and digital, temperature indicator and dimmer start. detail specifications are enclosed(1 set) hydromec make. diameter of the tube (d): 38mm length of the tube (l): 500mm duct size: 600mmx500mmx380mm no. of thermocouples: 7 temperature indicator: 0 300°c thermocouple: k type 1 5 heat transfer in forced convection, the test setup is fitted with test specimen of size 28 mm dia x 40 cms length with 0.5 hp blower along with motor, nichrome heater and control panel fitted with digital microprocessor based volt meter, ammeter, and digital, temperature indicator and dimmer start.(1 set) hydromec make. the test setup is fitted with test specimen of size 28 mm dia x 40 cms length with 0.5 hp blower along with motor, nichrome heater and control panel fitted with digital microprocessor based volt meter, ammeter, and digital, temperature indicator and dimmer start.(1 set) diameter of the copper tube: 28mm length of the copper tube: 400mm no. of thermocouples: 7 digital temperature indicator: 0 300°c thermocouple: k type dimmer stat: 10 amp, 230 volts digital ammeter & voltmeter 1 24 6 critical heat flux apparatus, the test setup is fitted with test specimen and control panel fitted with digital microprocessor based volt meter, ammeter, and digital, temperature indicator and dimmer start. (1 set) hydromec make. the test setup is fitted with test specimen and control panel fitted with digital microprocessor based volt meter, ammeter, and digital, temperature indicator and dimmer start. (1 set) nichrome wire size: 0.2mm diameter nichrome wire resistance: 4 ohms length of wire (l): 60mm dimmer stat: 10 amp, 230 volts digital temperature indicator: (0 199°c) temperature scanner: 8 channels thermocouple: k type (cr al) thermostat: 300°c digital ammeter & voltmeter temperature coefficient of resistance of nichrome wire = 0.00013 1 7 parallel flow / counter flow heat exchanger the test setup is fitted with parallel flow and counter flow heat exchanger along with geyser instant type for hot water supply and digital temperature indicator. (1 set) hydromec make. parallel flow / counter flow heat exchanger the test setup is fitted with parallel flow and counter flow heat exchanger along with geyser instant type for hot water supply and digital temperature indicator. (1 set) temperature indicator: (0 199°c) temperature scanner: 8 channels thermocouple: k type (cr al) inner tube material: copper i.d: 21 mm o.d: 25 mm outer tube material: stainless steel i.d: 30mm o.d: 34mm length of the heat exchanger: 1100 mm length of the copper tube: 250mm 1 8 thermal conductivity of liquids and gases: determination of thermal conductivity of liquids and gases. rotameter 25 to 250 lph – 1 no., pressure gauge compound – 4.2 kg / cm². hydromec make ...

South Central Railway - Andhra Pradesh

31487853 supply of acrylic sheet (plastic) size: 1200mmacrylic sheet (plastic) size: 1200mm,acrylic sheet (plastic) size: 1200mm length x 900mm breadth x 3mm thickness specn:is: 7569/1987 colour: transparent clear...

South Central Railway - Andhra Pradesh

31469882 supply of led display boardsled display boards,design, development, fabrication and installation of led display boards of 100 sq. feet with variable sizes along with trans lit print aluminum framework clamp model fixing with acrylic sheet face of 2mm thickness. 100 sqft.(variable sizes). note: (1) warranty/guarantee duration one year. (2) sample is to be got approved before bulk supply. (3) green co objectives: this shed is certified green co and integrated management system. please ensure to follow and comply the eco friendly measures in pursuance of green co policy....

Indian Navy - Andhra Pradesh

30791611 procurement of accessories of re bullet and maruti gypsy for pfr and milan 22 procurement of accessories of re bullet and maruti gypsy for pfr and milan 22 , wind shield for re bullet , electric siren cum pa system for re bullet , led lights with frame and clamps for re bullet , led lights for re bullet , led flashing lights for re bullets , leg guard assembly for re bullet , led light marsovoice series for maruti gypsy , pa amplifier for maruti gypsy , microphone for maruti gypsy , naval police emblem ( brass material ) with fixed acrylic sheet with brass stand for maruti gypsy , ashoka stambh ( brass material ) with fixed acrylic sheet with brass stand => limited...

Department Of Defence - Andhra Pradesh

30603468 bids are invited for aquarium tank aquarium tank: size: 95 (l) × 24(d) × 30(h) 19mm brace support made of 19mm clear glass aquarium cabinet: 95(l) × 24(d) × 36(h) metal frame with plywood finish two doors with bottom leveller bush aquarium tank sump filter: 48 × 18 × 18 made of 8mm clear glass flow rate 8000l/hr 2 number wavemaker, with material sponge, bio sponge, bio media, anti ammonia rock , ceramic rings stone holding acrylic sheet in the 2 inch bottom only layer rivers sand aquarium light: 4 number 48 inch led lights rocks for aqua scaping hole rocks medication: microlife, paracidol, general cure, bactonil fish food: 1kg thermostat controlled 500w automatic heater fishes: 10 type of 60 fishes algae eater fish 6 number aqua scaping: initial maintenance and training warranty: 1 year against manufacturing defects total quantity : 1...

South Central Railway - Andhra Pradesh

30559129 supply of acrylic sheet (plastic)acrylic sheet (plastic),acrylic sheet (plastic) size: 1200mm length x 900mm breadth x 3mm thickness specn:is: 7569/1987 colour: transparent clear...

Tirumala Tirupati Devasthanams - Andhra Pradesh

30522322 miscellaneous works at old dpw stores near alipiri tirupati. 40.00 dismantling ac or gi sheet roofing including ridges, rafters and purlins etc., and carefully stacking useful materials for reuse. dismantling ac or gi sheet roofing including ridge dismantling ac or gi sheet roofing including ridge na 10.02 0.50 demolition including stacking of serviceable materials and disposal of unserviceable materials within 100 metres lead brick work demolition including stacking of serviceable mater demolition including stacking of serviceable mater na 268.33 130.00 dismantling, clearing away and carefully stacking materials useful for re use thorough scraping of old plastered surface dismantling, clearing away and carefully stacking dismantling, clearing away and carefully stacking na 6.16 3.00 earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work ordinary soil manual means up to 3m depth. note: cost of dewatering may be added, where required, up to 5% of labour cost. assessment for dewatering shall be made as per site condition. earthwork excavation for foundations and depositi earthwork excavation for foundations and depositi na 238.81 6.00 cement concrete ( 1:4:8 ) using 40 mm ( 0.54 cu.m ) , 20 mm ( 0.27 cu.m ) and 12 mm ( 0.09 cu.m ) nominal size hard broken granite crushed metal from any source conforming to the relevant isi standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete. note: measurement boxes shall be used for measuirng the quantities of cement, aggregate and water required for the given concrete mix. cement concrete ( 1:4:8 ) using 40 mm ( 0.54 cu.m ) , 2 cement concrete ( 1:4:8 ) using 40 mm ( 0.54 cu.m ) , 2 na 4, 127.61 2.00 cement concrete ( 1:2:4 ) using 20 mm ( 0.54 cu.m ) , 12 mm ( 0.36 cu.m ) nominal size hard broken granite crushed metal from any source conforming to the relevant isi standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including centring charges, curing, machine mixing, cost and conveyance of all materials etc., complete. note: measurement boxes shall be used for measuirng the quantities of cement, aggregate and water required for the given concrete mix. cement concrete ( 1:2:4 ) using 20 mm ( 0.54 cu.m ) , 1 cement concrete ( 1:2:4 ) using 20 mm ( 0.54 cu.m ) , 1 na 6, 796.35 5.50 construction of brick masonry in cm ( 1:6 ) using well burnt bricks 2nd class or ground moulded ( non modular or traditional size ) ( 230 x 110 x 70 mm ) including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete. construction of brick masonry in cm ( 1:6 ) using w construction of brick masonry in cm ( 1:6 ) using w na 5, 958.52 0.00 plastering in cm using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions plastering in cm using best river sand from appro plastering in cm using best river sand from appro na 0.00 30.00 do in cm ( 1:5 ) 12 mm thick do in cm ( 1:5 ) 12 mm thick do in cm ( 1:5 ) 12 mm thick na 223.37 75.00 do in cm ( 1:5 ) 20 mm thick do in cm ( 1:5 ) 20 mm thick do in cm ( 1:5 ) 20 mm thick na 346.89 200.00 supply and fixing of ms tubes & pipes of all diameters as per ls 1161, including labour charges for fabricating all heavy steel works like trusses, stanchions, heavy beams and girders including cost of welding rods, power charges, etc and labour charges for fixing heavy iron grills, trusses, etc., complete in position, including painting the grills with two ( 2 ) coats with ready mixed synthetic enamel paint in all shades grade 1 having voc ( volatile organic compound ) content less than 50 grams / liter, approved colour and make, over a priming coat with ready mixed red oxide metal primer paint, total three ( 3 ) coats, including cost and conveyance of all materials, including brushes to have smooth finish, as directed during execution complying with standard specifications etc., complete supply and fixing of ms tubes & pipes of all diame supply and fixing of ms tubes & pipes of all diame na 116.48 35.00 painting priming coat with ready mixed cement primer ( water thinnable ) for interior grade i for old plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution. painting priming coat with ready mixed cement prim painting priming coat with ready mixed cement prim na 40.98 5.80 painting priming coat with ready mixed cement primer ( water thinnable ) for exterior grade 2 for old plastered surface including cost and conveyance of all materials including brushes to have smooth finish as directed during execution. painting priming coat with ready mixed cement prim painting priming coat with ready mixed cement prim na 43.50 110.00 painting two ( 2 ) coats for old internal walls, with acrylic emulsion paint interior grade having voc ( volatile organic compound ) content less than 50 grams / liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per ss 911 for internal walls. painting two ( 2 ) coats for old internal walls, wit painting two ( 2 ) coats for old internal walls, wit na 63.01 150.00 painting two ( 2 ) coats for old external walls, with acrylic emulsion paint exterior grade with silicon additives having voc ( volatile organic compound ) content less than 50 grams / liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per ss 911 for external walls. painting two ( 2 ) coats for old external walls, wit painting two ( 2 ) coats for old external walls, wit na 100.74 60.00 painting two ( 2 ) coats for new external walls, with acrylic emulsion paint exterior grade with silicon additives having voc ( volatile organic compound ) content less than 50 grams / liter of approved brand and shade over a priming coat with ready mixed cement primer ( water thinnable ) of exterior grade 2, total three ( 3 ) coats after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per ss 911 for external walls. painting two ( 2 ) coats for new external walls, wit painting two ( 2 ) coats for new external walls, wit na 216.36 370.00 supply and fixing of ms structural steel, i.e., angles, channels and i sections, including labour charges for fabricating steel works like window grills, compound wall grills, iron doors, windows including cost of welding rods, power charges, etc and labour charges for fixing grills etc., complete in position, including painting the grills with two ( 2 ) coats with ready mixed synthetic enamel paint in all shades grade 1 having voc ( volatile organic compound ) content less than 50 grams / liter, approved colour and make, over a priming coat with ready mixed red oxide metal primer paint, total three ( 3 ) coats, including cost and conveyance of all materials, including brushes to have smooth finish, as directed during execution complying with standard specifications etc., complete supply and fixing of ms structural steel, i.e., an supply and fixing of ms structural steel, i.e., an na 105.41 1700.00 supplying and fixing in position m.s ornamental grills for windows and ventilators or for veranda openings using m.s. flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with two coats with synthetic enamel paint gr i over a primary coat ( red oxide metal primer ) ( total three coats ) of approved make and colour including cost of making the holes into rcc or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete. supplying and fixing in position m.s ornamental g supplying and fixing in position m.s ornamental g na 105.68 40.00 supply and fixing of galvalume sheet pre painted galvalume trapezoidal profile roofing sheets with 0.47mm thickness ( total coated thickness tct ) , coating: alu zinc coating az150 gsm. tensile strength: 550 mpa. paint coating: regular modified polyester painting. painting thickness ( top ) : 18 to 20 microns, ( bottom ) : 5 to 7 microns. sheet width: 1.020, length: maximum 12 meters with regular range colours with minimum end lap of 15 cms etc., complete as directed during execution ( original coil shall be of make tata blue scope / jsw ) supply and fixing of galvalume sheet pre painted g supply and fixing of galvalume sheet pre painted g na 593.81 150.00 supply and fixing of stainless steel ss 304 grade tubes, sections, plates, sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using ss welding rods including buffing, polishing, lacquer finishing, to present seamless finishing etc., complete as directed during execution supply and fixing of stainless steel ss 304 grade supply and fixing of stainless steel ss 304 grade na 512.81 0.00 supply of semi skilled work men ( 2nd class ) / unskilled work men, as and when required, as directed during execution. supply of semi skilled work men ( 2nd class ) / unsk supply of semi skilled work men ( 2nd class ) / unsk na 0.00 15.00 do semi skilled work men ( 2nd class ) mason / brick layer / stone cutter / carpenter / plumber do semi skilled work men ( 2nd class ) mason / do semi skilled work men ( 2nd class ) mason / na 702.94 25.00 do unskilled work men man mazdoor / woman mazdoor do unskilled work men man mazdoor / woman ma do unskilled work men man mazdoor / woman ma na 656.08 30.00 supply and fixing of glow sign radium stickers name plate / sign ( or ) instruction boards using 3mm thick acrylic white sheet as back ground and glow sign radium sticker one layer for letters of different sizes as directed during execution including cost of 3mm thick acrylic sheet, radium sticker and all labour charges for computer design and cutting, pasting and fixing the boards to walls. supply and fixing of glow sign radium stickers nam supply and fixing of glow sign radium stickers nam na 143.53 450.00 labour charges for laying & fixing of precast concrete blocks for paving of all grades, any thickness, all sizes & shapes including all labour charges for loading & unloading, laying to desired lines and levels complete excluding cost of cement, sand, water, electricity etc., complete. labour charges for laying & fixing of precast conc labour charges for laying & fixing of precast conc na 254.40 1800.00 supplying and fixing galvanized steel barbed wire ( is:278 1978 weighing 9.38 kg per 100 metres ( min ) , straining and fixing to any type of standard, rails, staining bolts, including securing with and provision of galvanized mild steel wire, staples or steel pins, etc., as directed ( posts and struts of wood, concrete, steel etc., ) and straining bolts shall be paid for separately type a iowa & type b glidden type designation as per standard specification supplying and fixing galvanized steel barbed wire supplying and fixing galvanized steel barbed wire na 11.65 15.00 conveyance charges for machinery for transporting earth / sand / gravel / murrum / lime / surki by tippers and trucks including loading, unloading and idle hire charges with a lead up to 5 km etc., complete as directed during execution. conveyance charges for machinery for transporting conveyance charges for machinery for transporting na 96.30 rupees six lakh ( s ) fifty three thousand three hundred eighty six only...

South Central Railway - Andhra Pradesh

30125609 supply of mcb protection covermcb protection cover,supply & erection of mcb protection transparent cover for memu motor coaches as per mcsdrawing no. mcs/rjy/2021/03/ddac and as per the following specifications : length 790mm, height120mm,depth 30mm. cover material acrylic sheet, top locking hinge type, bottom locking : stainless steeltower bolts at both ends, frame stainless steel. one sample should be approved before supplying in bulk....

South Central Railway - Andhra Pradesh

29625127 supply of design, fabrication, supply, fixing and connecting of 600x600x80mm thick led double glow sign boardsdesign, fabrication, supply, fixing and connecting of 600x600x80mm thick led double glow sign boards,design, fabrication, supply, fixing and connecting of 600x600x80mm thick led double glow signboards made of frame size 1.6mm thick, ss304 grade mirror finishing stainless steel to work on voltage 140 265v ac with 2 mm thick acrylic sheet with vinyl stickering on both sides in trilingual including fixing of boardswith m.s. flat of size 25x25x3mm as advised by site engineer. the clamps shall be painted with two coats of redoxide and two coats of black enamel paint complete. => limited...

Municipal Corporation - Andhra Pradesh

28003813 supply and delivery of water quality laboratory instruments at victoria water works ok kakinada municipal corporation supply and delivery and conductivity sensors. part number : hq40d make : hach company, usa includes: meter, conductivity probe with 1 meter cable, ph electrode with 1 meter cable, 4 aa batteries, field kit ( protective meter glove with carry straps, sample containers ( 5 ) , meter caps ) , power cord, power supply, usb / dc adapter for data transfer, quick start guide, and user manuals conductivity measurement range:0.01 μs / cm 200.0 ms / cm conductivity resolution:0.01 μs / cm 0.1 ms / cm upon selected measuring range model:hq40d – multi / 2 channels ph measurement range:0 14 ph ph resolution:selectable: 0.001 / 0.01 / 0.1 ph turbidity meter hach includes 2100q instrument kit ( 2100q01 ) and adapter includes 2100q instrument and calibration standards, sample cells, oiling cloth, power module hsn code: 9027 range 0 to 1000 ntu ( fnu ) accuracy ±2% of reading plus stray light from 0 to 1000 ntu repeatability ±1% of reading, or 0.01 ntu ( fnu ) , whichever is greater resolution 0.01 ntu on lowest range stray light <0.02 ntu ( fnu ) signal averaging selectable on / offdetector silicon photovoltaic reading modes normal ( push to read ) ( user selectable ) signal averaging rapidly settling turbidity data logger 500 records power requirement 110 230 vac, 50 / 60 hz ( with power or usb+power module ) 4 aa alkaline batteries rechargeable nimh ( for use with usb+power module ) operating conditions temperature: 0 to 50°c ( 32 to 122°f ) relative humidity: 0 to 90% @ 30°c, 0 to 80% @ 40°c, 0 to 70% @ 50°c, noncondensing storage conditions 40 to 60°c ( 40 to 140°f ) , instrument only languages english, french, german, italian, spanish, portuguese ( br ) , interface optional usb instrument enclosure ip67 ( closed lid, battery rating compartment excluded ) protection class power supply: class ii certification ce certified sample required 15 ml ( 0.3 oz. ) sample cells 60 x 25 mm ( 2.36 x 1 in. ) borosilicate glass with screw cap batteries visible spectrophotometer model:dr3900 make: hach company, usa specifications: visible spectrophotometer specifications* wavelength range: 320 to 1100 nm wavelength accuracy : ± 1.5 nm ( wavelength range 340 to 900 nm ) wavelength reproducibility: ± 0.1 nm wavelength resolution : 1 nm wavelength calibration: automatic wavelength selection: automatic, based on method selection spectral bandwidth: 5 nm photometricmeasuring range: ± 3.0 abs ( wavelength range 340 to 900 nm ) operating mode: transmittance ( % ) , absorbance and concentration, scanning light source : gas filled tungsten ( visible ) optical system: reference beam, spectral photometric accuracy: 5 mabs at 0.0 to 0.5 abs 1 % at 0.50 to 2.0 absphotometric linearity: < 0.5 % to 2 abs dd0.01 % at >2 abs with neutral glass at 546 nm stray light: < 0.1 % t at 340 nm with nano2 display: 7 tft wvga ( 800 pix x 480 pix ) data logger: 2000 measured values ( result, date, time, sample id, user id ) preprogrammed methods: > 240 user programs: 100 sample cell compatibility: 13 mm round, 16 mm round, dimensions: ( h x w x d ) 5.9 in x 13.8 in x 10 in ( 151 mm x 350 mm x 255 mm ) weight : 9.26 lbs. ( 4.2 kg ) operating conditions : 10 to 40 °c storage conditions: 30 to 60 °c enclosure rating: ip30 power supply : benchtop power supply power requirements ( voltage ) : 110 240 v ac power requirements: ( hz ) 50 / 60 hz supply and delivery of sulphate reagent , 2106769 , 100 tests range: 2 70mg / l supply and delivery of iron reagent , 2105769 , 100 tests range: 0.02 3.00mg / l supply and delivery of chloride reagent pack , 2319800 range: 0.1 25.0mg / l 100 test supply and delivery of fluoride reagent, 44453 , 1000ml range: 0.02 2.00mg / l supply and delivery of nitrate reagent , 2106169 , 100 tests range: 0.3 30.0mg / l supply and delivery of hardness , ca &mg , 2319900 range: 0.05 4.00mg / l 100 tests total chlorine reagent , 2105669, 100 tests range: 0.02 2.00mg / l bacteriological incubator make : labline / sisco / rea size :18”×18”×18” capacity : 2 trys specifications : bacteriological incubator ( member type ) these are sturdy double walled units with outer chamber made of m.s. sheet duly enamel painted with inner up of anodized aluminum or s.s. sheet. the gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. beaded heating elements are placed in ribs, at bottom and sides. inner chamber is provided with ribs for adjusting perforated shelves to convenient height. the door is fitted with glass viewing window to facilitate inspection of sample without disturbing the test temperature. temperature is controlled by hydraulic type capillary thermostat from ambient to 700c + 0.50c. an l shaped prismatic is fitted to unit for reading the chamber temperature. air ventilators are also provided on the sides of unit. to work on 220 / 230 volts a.c. supply. open reflex cod digester unit temperature – upto 150digress 6 holes condensers 6 reaction vessels 6 stand 1 make: labline / sisco / rea laminar air flow ( vertical ) make :labline / sisco area : 2’*2’*2’ this complete package unit is provided to give clean air to any laboratory. useful where any hyper critical work has to be performed within minimum contamination as they assure 99.97% removal of airborne particles as 0 3 microns in the work area. the basic elements are pre filters, heavy duty blower assembly; hepa ( high efficiency particular air ) filter ( absolute filter ) fresh air is drawn through the pre filter and passes to absolute hepa filter. ultra clean air moves horizontally in laminar flow bench cross the work area at a velocity of approximate 90; ± 20 feet per minute. construction: basic material is duran board wood / m.s. powder coated / s.s. 304 grade installed and checked for leakage. work table is made of mica top / s.s. top and side panels are made of 6mm thick glass transparent framed in anodized aluminum angle frame. blowers are fitted with ¼ h.p. electric motor operates with minimum noise and vibration. suitable to operate on 220 volts 50 cy. ac supply. complete with hepa filters, prefilters, motor blower, manometer, and gas cock, transparent acrylic sheet front and side doors. u.v.light hot air overn oven universal ( member type make : labline / sisco / rea size :350 x 350 x 350 ( 18” x 18” x 18” ) specifications : these are sturdy double walled units with outer chamber made of m.s. sheet duly enamel painted with inner made up of anodized aluminum or s.s. sheet. the gap between inner and outer chamber is filled with high grade glass wool to avoid thermal losses. beaded heating elements are placed in ribs, at bottom and sides. inner chamber is provided with ribs for adjusting perforated shelves to convenient height. temperature is controlled by hydraulic type capillary thermostat from 500c to 2500c + 10c. an l shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. air ventilators are also provided on the sides of the unit. to work on 220 / 230 volts a.c. air circulating fan microprocessor based digital temp indicator cum controller laboratory refrigerator make: remi capacity : 200ltrs no. of doors x 1 no. of shelves x 3 steam autoclave set at 121 *c digital indicator and controller autoclave vertical make : labline / sisco hsn code : 8419 size : 53 ltrs it is used for sterilization under saturated steam pressure at any selected point between 10 to 20 p.s.i. ( adjustable ) . fitted with neoprene rubber gasket, all systems are hydraulically tested up to 40 p.s.i., as a safety measure ) semi automatic: inner & outer s.s with lid made of s.s supported ring and legs are made of stainless steel. gasket is made of imported silicon rubber. fitted with semi automatic digital controller with auto time control system. auto cut off system and sound buzz system installed for user for alerting that the cycle is over. water bath at 45 + / 1*c water bath rectangular ( double wall make : labline / sisco / rea hsn : 8419 size :425 x 325 x 100 m.m ( 12 holes of 3” diameter ) made out of heavy gauge s.s. with concentric rings. auto cut heating elements are fitted to protect the same when bath gets dry. to work on 220 / 230 a.c. supply. 40 x microscope with camera attachment microscope with 32 inches led screen make: olympus, model: ch20i colony counter digital make: labline / sisco / rea fitted with automatic 3 digits led digital, counting plate with illuminated standard filing ensures clearly differentiated and sharply defined colonies. each touch of marking pencil in the petridis increments the colony count by 1 and the glowing led display depicts the total colony count. maximum colony count possible up to mm dia lens cord and plug. to work on 220 v a.c. 100% oil free diaphragm / piston type vacuum pressure pump specifications type : diaphragm rubber head : single displacement : 15 liters. / min vacuum : 22”hg. pressure : 25 psi h.p. : 1 / 16, single phase vacuum gauge ( dial type ) with regulator pressure gauge ( dial type ) with regulator micropipette ( fixed & variable ) – 1000ml make : reputed supply nad dlelivery of micro pipette stand supply and delivery of double distillation unit make : reputed chemicals for e coli & m –coli and required chemicals in lab supply and delivery of glassware for analysis ( lot ) weighing balance precision balance hsn code: 9016 range :610 grms repeatability : 10 mg . ( 0.01grms ) redability : 10 mg . ( 0.01grms make: sartorius / shimadzu supply and delivery of 1.5 ton air conditioner supply and delivery of laboratory furniture ( lot ) supply of system make ( lenovo, dell, hp ) with 8 gb ram, 1 tb hdd, latest gen processor along with all in one printer make ( epson , hp ) online instrument for ph , conductivity, turbidity and chlorine analyzer s ( panel mounting ) with data logger mobile display...

South Central Railway - Andhra Pradesh

27712861 supply of supply & erection of mcb protection transparent cover for memu motor coachessupply & erection of mcb protection transparent cover for memu motor coaches, supply & erection of mcb protection transparent cover for memu motor coaches as per the following specifications : length 790mm, height 120mm, depth 30mm. cover material acrylic sheet, top locking hinge type, bottom locking stainless steel tower bolts at both ends, frame stainless steel....

South Central Railway - Andhra Pradesh

27593367 supply of led light boards size:1.25ftx2 ftled light boards size:1.25ftx2 ft, design, development, supply & fixing of back light sandwich led light board with transparent acrylic sheet of 2mm thickness, size 1.25 ft. x 2 ft. & fixing with 4 nos of ss studs 10 nos; trans lit uv printed matter will be supplied....

Military Engineer Services - Andhra Pradesh

27413104 provision of railing in building p 153 at naval station bheemunipatnam and addition and alteration for vinyl flooring in building p 48 at naval station bheemunipatnam , cutting holes of superficial area not exc 150sqcm in stone walls or cement concrete walls built in cement mortar , including making good surface etc complete all as specified . , s&f anchor fastener screw bolts 10 to 12mm neck dia ( machine made ) with hexagonal or square heads at one end and screwed the other , or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exc 5cm n exc 10cm long . , s&f stainless steel handrails , fabricated to required design , using 304l stainless steel square / rectangular hollow sections balusters and fittings , including welding and polishing and fixed with necessary stainless steel plates , flanges , canopies , screws etc , complete all as specified and as directed . , s&f 5mm thick acrylic sheet with stainless steel ( grade 304l ) studs and bolts on all edges as per site requirements with standard make all as specified and as directed , dismantling existing vinyl flooring including cleaning the surface . , s&f vinyl flooring of 1 . 3mm thick , in flooring fixed with adhesive fevicol sr 505 or any other equivalent make , etc complete all as per manufacturers instructions and as directed by engr in charge ....

South Central Railway - Andhra Pradesh

25983868 supply of , folded type pocket name badges with designation for departmental staff duly providing the names and designation in printed format as per the description given by the department. the printed format provided on 2.5mm thickness acrylic sheet with data visible area of 40mm x 80mm and the total size of badge including pocket folding size: 150mm x 2.5mm thickness....

South Central Railway - Andhra Pradesh

25592392 supply of , folded type pocket name badges with designation for departmental staff duly providing the names and designation in printed format as per the description given by the department. the printed format provided on 2.5mm thickness acrylic sheet with data visible area of 40mm x 80mm and the total size of badge including pocket folding size: 150mm x 2.5mm thickness....

Directorate Of Lighthouses And Lightships - Andhra Pradesh

25558817 procurement and installation of rotating led light beacon at armagon lighthouse under visakhapatnam directorate , light beacon: , procurement and installation of rotating led light becon at armagon lighthouse under visakhapatnam directorate . ( it consists of supply , installation , testing and commissioning of rotating led light beacon ) . make: vega , msm , tideland , zenilite , sealite , sabik , pharos marinea ) optical specification : light source : high intensity led , minimum 1 , 25 , 000 cdb ) luminous range: not less than 23 nm @ 0 . 74tc ) light colour : whited ) vertical divergence >1 . 5 degree vertical . e ) flash character : fl w in 15 seconds , programmable , adjustable . f ) environmental specification : temperature 40 degree c to +50 degree c or above;g ) intrusion protection ip56 or above . h ) ultra violet radiation: all external materials are uv resistant . i ) lens motor drive: brushless direct drive motor preferred . j ) speed programmable , adjustable from 1 rpm to 16 rpm . k ) number of panels: minimum six panelsl ) electrical specifications: input voltage: 12vdc to 36 vdc , low voltage cut out , programmable threshold input /outputs , rs 232 interface . m ) day/night transition: photo sensor . program settings for day/night transition . n ) warranty: 3 years , one set of essential spares for rotation mechanism , one set of essential spares for control cards/pcbs , one set of essential spares for sensors/transducers , one set of essential spares for blank plates , acrylic sheets/glass sheets , any other essential spares ( to be specified by the bidder in a seperate sheet ) , installation , testing and commissioning charges of rotating led light beacon at armagon lighthouse , nidigurthi ( post ) , via . mallam , nellore ( district ) andhra pradesh state 524403...

East Coast Railway - Andhra Pradesh

25298626 supply of , set of items to fight against novel covid 19 virus for making robot, set consists of five items as detailed below: (1) 10 mm water proof ply wood and termite free with isi mark, size: 4 feet x 8 feet, qty 04 nos. make: everest / e.p.gold / century ply. 2)s.s (stainless steel) sheet size : 8 feet x 4 feet x 1.25 mm thickness grade 304,make: jindal/laxmi/ tata/jsw steel,qty 2 nos 3) stainless steel square pipe 1 inch size: length :20 feet ,thickness : 1.6 mm ,grade: 304,make: jindal/laxmi/ tata/jsw steel, qty 2 nos 4) uvc lamp set 36 watt with complete fittings workable in domestic 230 v ac line make: philips / germicidal / sylvania / bajaj, qty 5 nos 5) acrylic sheet size: 8 feet x 4 feet x 4 mm thickness,qty 1 no...

South Central Railway - Andhra Pradesh

24657900 supply of , no touch automatic hand sanitizer dispenser of size (l*w*h): 200*300*320mm of acrylic sheet 3 mm thick capacity 05 liters with discharge rate 1.25 2.5ml with motion sensor dispensing, solenoid valve controlled, fluid level indicator, 1 amp usb charging socket, mobile power back powered....

South Central Railway - Andhra Pradesh

24523987 supply of , mobile charging stand made of imported transport acrylic sheet of thickness 3 mm as per the drawing attached, ir monogram sticker of suitable size will be pasted as per drawing and sample should to be provided along with the offer other wise offer will be ignored....

South Central Railway - Andhra Pradesh

24442706 supply of , customized design clear mobile stand specifications : made of 3mm imported clear acrylic sheet having anti fungal property of size 180mm x 165 mm x 25 mm of one piece design with laser cutting technology, fitting arrangement with three hole of dia 4 mm fixed with antique screw type arrangement having indian railway logo of size dia 25mm with stand top rounded are design with gtl division written on each stand as per drawing of cdo/tpty/01...

South Central Railway - Andhra Pradesh

24442698 supply of , supply of train schedule boards of size: 400 x 300 x 3 mm thickness, material to be used transparent acrylic sheet of superior quality (imported of make margacipta or f.s only accepted) and the matter to be printed as reverse and backside process with 06 holes of 05 mm dia....

South Central Railway - Andhra Pradesh

24318743 supply of , mobile charging stand made of imported transport acrylic sheet of thickness 3 mm as per the drawing attached, ir monogram sticker of suitable size will be pasted as per drawing and sample should to be provided along with the offer other wise offer will be ignored....

South Central Railway - Andhra Pradesh

24245683 supply of , supply and erection of set of transparent covers of acrylic sheets with steel hinges and stainless steel channels on mcb panels in driver cab of memu motor coaches. set consist of (1) transparent cover size : 800mm length x 100 mm width x 30 mm projected height and 15mm/15mm tapper. qty set 27nos. (2) transparent cover size : 600mmlength x 100 mm width x 30 mm projected height and 15mm/15mm tapper. qty set 5nos....

South Central Railway - Andhra Pradesh

24187790 supply of , supply and erection of set of transparent covers of acrylic sheets with steel hinges and stainless steel channels on mcb panels in driver cab of memu motor coaches. set consist of ( 1 ) transparent cover size : 800mm length x 100 mm width x 30 mm projected height and 15mm / 15mm tapper. qty set 27nos. ( 2 ) transparent cover size : 600mmlength x 100 mm width x 30 mm projected height and 15mm / 15mm tapper. qty set 5nos....

South Central Railway - Andhra Pradesh

24046593 supply of , unified stickers on acrylic sheet of 3mm thickness printed and pasted on reverse side as per drg.no k 3028 with four holes of 4mm dia for fixing purpose acrylic sheet . note: mater to be printed to be collected from consignee...

South Central Railway - Andhra Pradesh

23920138 supply of , mobile charging stand made of imported transport acrylic sheet of thickness 3 mm as per the drawing attached, ir monogram sticker of suitable size will be pasted as per drawing and sample should to be provided along with the offer....

South Central Railway - Andhra Pradesh

23871102 supply of , coach indication number plates on acrylic sheets of size 8 x 8 with white background and blue lettering ( c1 10 nos, c2 10 nos, d1 10 nos, d2 10 nos, d3 10 nos boards)...